Attempt to bring i386 / sc520 inline with master
Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Add support for environment in NAND with automatic NOR / NAND recognition,
including unaligned environment, bad-block skipping, redundant environment
copy.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Acked-by: NStefan Roese <sr@denx.de>

Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>

This patch adds Lime GDC support together with support for the PWM
backlight control through the w83782d chip.  The reset pin of the
latter is attached to GPIO, so we need to reset it in
early_board_init_r.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

- Update the local bus ranges in the FDT for Linux for the various
  devices connected to the local bus via chip-select.

- Set the LCRR_DBYP bit in the LCRR for local bus frequencies
  lower than 66 MHz and uses I/O accessor functions consequently.

- UPM data update.

- Update of default environment and configuration.  Use I2C multibus
  as we do have two I2C buses.  Also enable sdram and ext2 commands.
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: NDetlev Zundel <dzu@denx.de>

The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
86xx boards already use sys_eeprom.c, so this patch migrates the remaining
Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.
Signed-off-by: NTimur Tabi <timur@freescale.com>

This allows to use show_activity() without having to
define an empty board_show_activity() function.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Conflicts:

	Makefile
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This patch fixes warnings like this:

start.S:0: warning: target CPU does not support interworking

which come from some ARM cross compilers and are caused by hard-coded
(with "--with-cpu=arm9" configuration option) ARM targets (which
support ARM Thumb instructions), while the ARM target selected from
the command line (with "-march=armv4") doesn't support Thumb
instructions.

This warning is issued by the compiler regardless of the real use of
the Thumb instructions in code.

To fix this problem, we use options according to compiler version
being used.
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>

bootm.c:128: warning: label 'error' defined but not used
bootm.c:65: warning: unused variable 'ret'
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

missing doc_probe() prototype.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch moves some 4xx specific prototypes out of include common.h
to a ppc4xx specific header.
Signed-off-by: NStefan Roese <sr@denx.de>

This patch add FDT support and command line editing capabilities
for CPCI405 and CPCI405AB boards.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NStefan Roese <sr@denx.de>

This patch replaces the BOARD_REVISION variable in include/config.mk
by a using a temporary include file in the platform directory.

The former way does not work anymore and the latter is also used by
some other boards.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Since this define is only used on one board that was never really in
production, removing this compile time option doesn't hurt and makes
the code more readable.
Signed-off-by: NStefan Roese <sr@denx.de>

This patch fixes a compilation warning for the PIP405 board. It moves the
#ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
occur anymore. I am a little unsure if this #ifdef is at the correct
place now or if it could be removed completely. This needs to get
tested on the PIP405 board.
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NStefan Roese <sr@denx.de>

ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
ctrl_regs.c:523: note: 'caslat' was declared here

Add a warning in DDR1 case if cas_latency isn't a value we know about.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp>

Adds returning an error from the ramdisk detection code if
its not a real ramdisk (invalid).  There is no reason we can't
just return back to the console if we detect an invalid
ramdisk or CRC error.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds bootm_start() return value check. If
error status is returned, we do not proceed further to
prevent board reset or crash as we still can recover
at this point.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

rearrange some #if !defined() / #else / #endif statements to remove
the negative logic.
Signed-off-by: NAndrew Dyer <adyer@righthandtech.com>

Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
because I have no longer access to the hardware.
Signed-off-by: NHeiko Schocher <hs@denx.de>

Fix compile problems caused by
commit  cfa460adSigned-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>