- 20 7月, 2012 8 次提交
-
-
git://git.denx.de/u-boot-usb由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-usb: usb_storage: fix ehci driver max transfer size smsc95xx: align buffers to cache line size ehci-hcd: change debug() to printf() in case of errors usb: check return value of submit_{control, bulk}_msg usb: pass cache-aligned buffer to usb_get_descriptor() ehci-hcd: fix external buffer cache handling ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment ehci-hcd: program asynclistaddr before every transfer common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER ehci-omap: Do not call dcache_off from omap_ehci_hcd_init Signed-off-by: NWolfgang Denk <wd@denx.de>
-
git://git.denx.de/u-boot-blackfin由 Wolfgang Denk 提交于
* 'sf' of git://git.denx.de/u-boot-blackfin: sf: spansion: inline useless id defines sf: drop unused/duplicate command defines Signed-off-by: NWolfgang Denk <wd@denx.de>
-
git://git.denx.de/u-boot-net由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-net: net: link_local: fix build net: bootp: fix build Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
We have a header file specifically for mingw cruft, so keep it there to avoid crap spreading into the main tools. This lets our devs just worry about *nix systems. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
No need for dedicated defines when these really only get used once. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
In an effort to unify the spi flash drivers further, drop all the unused and/or duplicate command defines. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 benoit.thebaudeau@advans 提交于
Fix comment within comment build error. Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
-
由 benoit.thebaudeau@advans 提交于
Fix NetSetState function name used with CONFIG_BOOTP_MAY_FAIL. Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
-
- 19 7月, 2012 1 次提交
-
-
由 Mike Frysinger 提交于
Now that common code doesn't declare these as volatile, we don't need to either anymore. This fixes the build warning: bfin_mac.c: In function 'bfin_EMAC_recv': bfin_mac.c:193:23: warning: assignment discards qualifiers from pointer target type Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 18 7月, 2012 12 次提交
-
-
由 Stefan Herbrechtsmeier 提交于
The commit 5dd95cf9 'usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM' introduce a bug in usb_storage as it wrongly assumes that every transfer can use 4096 bytes per qt_buffer. This is wrong if the start address of the data is not page aligned to 4096 bytes and leads to 'EHCI timed out on TD' messages because of 'out of buffer pointers' in ehci_td_buffer function. The bug appears during load of a fragmented file and read from or write to an unaligned memory address. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NStefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
-
由 Ilya Yanok 提交于
Align buffers passed to the USB code to cache line size so they can be DMAed safely. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Ilya Yanok 提交于
Printing message could be useful if something goes really wrong. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Ilya Yanok 提交于
Return values of submit_{control,bulk}_msg() functions should be checked to detect possible error. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Ilya Yanok 提交于
usb_get_descriptor passes it's buffer argument directly to usb_control_msg() so it has to be properly aligned/padded. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Ilya Yanok 提交于
Buffer coming from upper layers should be cacheline aligned/padded to perform safe cache operations. For now we don't do bounce buffering so getting unaligned buffer is an upper layer error. We can't check if the buffer is properly padded with current interface so just assume it is (consider changing with in the future). The following changes are done: 1. Remove useless length alignment check. We get actual transfer length not the size of the underlying buffer so it's perfectly valid for it to be unaligned. 2. Move flush_dcache_range() out of while loop or it will flush too much. 3. Don't try to fix buffer address before calling invalidate: if it's unaligned it's an error anyway so let cache subsystem cry about that. 4. Fix end buffer address to be cacheline aligned assuming upper layer reserved enough space. This is potentially dangerous operation so upper layers should be careful about that. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Tom Rini 提交于
The USB spec says that 32 bytes is the minimum required alignment. However on some platforms we have a larger minimum requirement for cache coherency. In those cases, use that value rather than the USB spec minimum. We add a cpp check to <usb.h> to define USB_DMA_MINALIGN and make use of it in ehci-hcd.c and musb_core.h. We cannot use MAX() here as we are not allowed to have tests inside of align(...). Signed-off-by: NTom Rini <trini@ti.com> [marek.vasut]: introduce some crazy macro voodoo Signed-off-by: NMarek Vasut <marex@denx.de> [ilya.yanok]: moved external buffer fixes to separate patch, we use {ALLOC,DEFINE}_ALIGN_BUFFER macros with alignment of USB_DMA_MINALIGN for qh_list, qh and qtd structures to make sure they are proper aligned for both controller and cache operations. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Ilya Yanok 提交于
Move or_asynclistaddr programming to ehci_submit_async() function to make sure queue head is properly programmed before every transfer. This solves the problem with changing qh address. Also remove unneeded qh_list->qh_link reprogramming at the end of transfer. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Marek Vasut 提交于
This is the out-of-function-scope counterpart of ALLOC_CACHE_ALIGN_BUFFER. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> [ilya.yanok]: added missing <linux/compiler.h> include and {DEFINE,ALLOC}_ALIGN_BUFFER macros allowing explicit alignment specification. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Tom Rini 提交于
This has never been completely sufficient and now happens too late to paper over the cache coherency problems with the current USB stack. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@ti.com> Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
git://git.denx.de/u-boot-video由 Wolfgang Denk 提交于
* 'next' of git://git.denx.de/u-boot-video: ipu_common: Add ldb_clk for use in parenting the pixel clock ipu_common: Do not hardcode the ipu_clk frequency ipu_common: Rename MXC_CCM_BASE ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53 ipu_common: Only apply the erratum to MX51 video: Rename CONFIG_VIDEO_MX5 mx6: Allow mx6 to access the IPUv3 registers common lcd: minor coding style changes Signed-off-by: NWolfgang Denk <wd@denx.de>
-
git://git.denx.de/u-boot-nios由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-nios: nios2: move gd and bd into BSS Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 16 7月, 2012 1 次提交
-
-
由 Thomas Chou 提交于
As suggested by Graeme Russ, move gd and bd data structrures to BSS instead of calculating the locations around the stack and heap. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
- 14 7月, 2012 5 次提交
-
-
由 Jerry Huang 提交于
For FSL low-end processors (VVN2.2), in order to detect the SD card, we should enable PEREN, HCKEN and IPGEN to enable the clock. Otherwise, after booting the u-boot, and then inserting the SD card, the SD card can't be detected. For SDHC VVN2.3 IP, these bits are reserved, and SDCLKEN is used. And when accessing to these reserved bit, no any impact happened. Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com> CC: Andy Fleming <afleming@gmail.com> CC: Marek Vasut <marex@denx.de> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Jerry Huang 提交于
Use the function 'mmc_send_status' to check the card status. only when the card is ready, driver can send the next erase command to the card, otherwise, the erase will failed: => mmc erase 0 1 MMC erase: dev # 0, block # 0, count 1 ... 1 blocks erase: OK => mmc erase 0 2 MMC erase: dev # 0, block # 0, count 2 ... mmc erase failed 1 blocks erase: ERROR => mmc erase 0 4 MMC erase: dev # 0, block # 0, count 4 ... mmc erase failed 1 blocks erase: ERROR Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com> CC: Andy Fleming <afleming@gmail.com> CC: Marek Vasut <marex@denx.de> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Łukasz Majewski 提交于
This code adds call to mmc_init(), for partition related commands (e.g. fatls, fatinfo etc.). It is safe to call mmc_init() multiple times since mmc->has_init flag prevents from multiple initialization. The FAT related code calls get_dev high level method and then uses elements from mmc->block_dev, which is uninitialized until the mmc_init (and thereof mmc_startup) is called. This problem appears on boards, which don't use mmc as the default place for envs Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Andy Fleming <afleming@gmail.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Jaehoon Chung 提交于
mmc_set_clock is set to the hard-coding. But i think good that use the tran_speed value. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Eric Nelson 提交于
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 12 7月, 2012 1 次提交
-
-
git://git.denx.de/u-boot-i2c由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-i2c: mx28evk: Add I2C support mxs-i2c: Fix internal address byte order mxc_i2c: remove setting speed at each start mx6qsabrelite: add i2c support mxc_i2c: specify i2c base address in config file Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 11 7月, 2012 5 次提交
-
-
由 Fabio Estevam 提交于
Add I2C support. Tested by placing a 24LC16 EEPROM into the U50 slot which comes empty from factory. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Torsten Fleischer 提交于
Large EEPROMs, e.g. 24lc32, need 2 byte to address the internal memory. These devices require that the high byte of the internal address has to be written first. The mxs_i2c driver currently writes the address' low byte first. The following patch fixes the byte order of the internal address that should be written to the I2C device. Signed-off-by: NTorsten Fleischer <to-fleischer@t-online.de> CC: Marek Vasut <marex@denx.de> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Troy Kisky 提交于
Other then being very weird, this code was also wrong. For example, say I set speed to 100K. I'll read back the speed as 85937. But the speed is really 85937.5, so we I reset the speed to 85937, I'll get 73660.7. After a couple of transactions my speed is now exactly 68750 so it will remain there. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Troy Kisky 提交于
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Troy Kisky 提交于
The following platforms had their config files changed flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd and mx53loco. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 10 7月, 2012 7 次提交
-
-
由 Mike Frysinger 提交于
The clean up patch missed an &, so we end up passing an int rather than a pointer to the sprintf function. arp.c: In function 'ArpReceive': arp.c:197: warning: format '%p' expects type 'void *', but argument 3 has type 'int' Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Nobuhiro Iwamatsu 提交于
When support sh7734 of sh-ether, ECSIPR_BRCRXIP and other were removed. Therefore SH7757 and SH7724 can not build. This revise this probelem. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
-
由 Eric Nelson 提交于
Add ldb_clk for use in parenting the pixel clock. Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
Do not hardcode the ipu_clk frequency and let the board file pass this value. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
Rename MXC_CCM_BASE to CCM_BASE_ADDR as this is already defined for MX6. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
The registers accessed inside clk_ipu_enable/disable are not present on MX6, so make sure they only run on MX51 and MX53. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
The following erratum : "ENGcm08316 IPU: Clarification regarding the bypass mode registers setup for display and camera interfaces" only applies to mx51, so restrict its usage for this SoC only. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-