- 10 6月, 2016 12 次提交
-
-
由 Heiko Schocher 提交于
on the shc board we see when booting in net boot mode, that the ROM bootloader sends "AM335x ROM" as vendor-class-identifier. U-Boots doc says "DM814x ROM". So, add the info to the doc, that there is also "AM335x ROM" possible. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
make this function weak, so board code can setup in SPL MMC init with board special values. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Enable 8bit interface on HSMMC2 for am33xx to support 8bit eMMC chips. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
revert patch: commit: 6b2221b0: mmc: Handle switch error status bit in MMC card status to get eMMC working on shc board Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
show_boot_progress() is now called from SPL also. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Enable Spread Spectrum for the MPU by calculating the required values and setting the registers accordingly. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
add missing CM_CLKMODE_DPLL_SSC_ACK_MASK, CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK and CM_CLKMODE_DPLL_SSC_TYPE_MASK defines. Used for enabling spread spectrum. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
add missing: OMAP_GPIO_IRQSTATUS_SET_0 and OMAP_GPIO_IRQSTATUS_SET_1 registers. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
add the following defines, needed for the upcoming shc board support: Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
if CONFIG_VERSION_VARIABLE is set, the U-Boot environment contains a "vers" variable with the current U-Boot version string. If now "printenv" is called, test/py fails as it detects the main_sign string, which is in this case correct. So check only the main_sign as an error, if CONFIG_VERSION_VARIABLE is not set. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Simon Glass 提交于
This current code passes the variable arguments list to sprintf(). This is not correct. Fix it by calling _vprintf() directly. This makes firefly-rk3288 boot again. Fixes: abeb272d ("tiny-printf: Support snprintf()") Reviewed-by: NStefan Roese <sr@denx.de> Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 09 6月, 2016 6 次提交
-
-
由 Masahiro Yamada 提交于
I noticed secondary CPUs sometimes fail to wake up, and the root cause is that the sev instruction wakes up slave CPUs before the preceding the register write is observed by them. The read-back of the accessed register does not guarantee the order. In order to ensure the order between the register write and the sev instruction, a dsb instruction should be executed prior to the sev. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Unlike NAND, eMMC can be re-written without erasing. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This code auto-detects the best-match FDT file name, but it should respect the user's choice if "fdt_file" environment is found in a saved set of environments. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Because setenv() may fail, it is better to check its return code. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This function is shared between PH1-LD11 and PH1-LD20. The difference is the boot-mode latch for the USB boot mode. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The Boot ROM on PH1-LD11/LD20 exports built-in APIs to load images from an eMMC device. They are useful to reduce the memory footprint of SPL, rather than compiling the whole MMC framework. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 07 6月, 2016 21 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
http://git.denx.de/u-boot-samsung由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com> Conflicts: configs/peach-pi_defconfig configs/peach-pit_defconfig
-
由 B, Ravi 提交于
Avoid use of hard coded mmcdev value, use bootpart instead, so finduuid works based on bootpart set for a specific platform. Signed-off-by: NRavi Babu <ravibabu@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Andre Przywara 提交于
Some SPL loaders (like Allwinner's boot0, and Broadcom's boot0) require a header before the actual U-Boot binary to both check its validity and to find other data to load. Sometimes this header may only be a few bytes of information, and sometimes this might simply be space that needs to be reserved for a post-processing tool. Introduce a config option to allow assembler preprocessor commands to be inserted into the code at the appropriate location; typical assembler preprocessor commands might be: .space 1000 .word 0x12345678 Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NSteve Rae <srae@broadcom.com> Commit Notes: Please note that the current code: start.S (arm64) and vectors.S (arm) already jumps over some portion of data already, so this option basically just increases the size of this region (and the resulting binary). For use with Allwinner's boot0 blob there is a tool called boot0img[1], which fills the header to allow booting A64 based boards. For the Pine64 we need a 1536 byte header (including the branch instruction) at the moment, so we add this to the defconfig. [1] https://github.com/apritzel/pine64/tree/master/tools END Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Chris Packham 提交于
When setting up a DDR controller it is useful to be able to display frequencies in a readable form. Make the strmhz() function available in SPL builds provided there is full vsprintf available. Reviewed-by: NTony O'Brien <tony.obrien@alliedtelesis.co.nz> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NChris Packham <judge.packham@gmail.com>
-
由 Robert P. J. Day 提交于
Since bcopy() is no longer used, delete all remaining references to it. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Lokesh Vutla 提交于
Now that all Keystone2 dts file names are changed in Linux kernel, reflect the same in evn variables inorder to find the right dtb file. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
Use a single defconfig for all DRA7xx hs platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Ladislav Michl 提交于
Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Acked-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Alexander Graf 提交于
Some systems are starting to shift to support DM_VIDEO which exposes the frame buffer through a slightly different interface. This is a poor man's effort to support the dm video interface instead of the lcd one. We still only support a single display device. Signed-off-by: NAlexander Graf <agraf@suse.de> [trini: Remove fb_size / fb_base as they were not used] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Alexander Graf 提交于
When a payload calls our memory allocator with the exact address hint, we happily allocate memory from completely unpopulated regions. Payloads however expect this to only succeed if they would be allocating from free conventional memory. This patch makes the logic behind those checks a bit more obvious and ensures that we always allocate from known good free conventional memory regions if we want to allocate ram. Reported-by: NJonathan Gray <jsg@jsg.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We introduced special "DEBUG_EFI" defines when the efi loader support was new. After giving it a bit of thought, turns out we really didn't have to - the normal #define DEBUG infrastructure works well enough for efi loader as well. So this patch switches to the common debug() and #define DEBUG way of printing debug information. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Some times you may want to exit an EFI payload again, for example to default boot into a PXE installation and decide that you would rather want to boot from the local disk instead. This patch adds exit functionality to the EFI implementation, allowing EFI payloads to exit. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
To quit an EFI application we will need logic to jump to the caller of a function without returning from the function we called into, so we need setjmp/longjmp functionality. This patch introduces a trivial implementation of these that I verified works on armv7, thumb2 and aarch64. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Dirk Eibach 提交于
There is new strider cpu flavor with DisplayPort video. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Dirk Eibach 提交于
There is a new strider console flavor with DisplayPort video. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Dirk Eibach 提交于
Limit "osdsize"-command to access valid screens only. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Dirk Eibach 提交于
There is a new "intempo" compression type that can be reported on startup. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Peter Howard 提交于
Signed-off-by: NPeter Howard <phoward@gme.net.au>
-
由 Ed Swarthout 提交于
Fixes: => ext2ls scsi 0:1 ** Bad device scsi 0:1 ** for boards which use the scsi legacy driver (such as ls1043ardb). Signed-off-by: NEd Swarthout <Ed.Swarthout@nxp.com> Tested-by: NGeorge McCollister <george.mccollister@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
git://git.denx.de/u-boot-usb由 Tom Rini 提交于
Modified: configs/ls1012afrdm_qspi_defconfig configs/ls1012aqds_qspi_defconfig configs/ls1012ardb_qspi_defconfig include/configs/ls1012afrdm.h include/configs/ls1012aqds.h include/configs/ls1012ardb.h Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 06 6月, 2016 1 次提交
-
-