- 18 4月, 2008 16 次提交
-
-
由 Jason Wessel 提交于
The cross compiler is responsible for providing the correct libraries and the logic to find the linking libraries. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Bartlomiej Sieka 提交于
- document 'bootm_low' and 'bootm_size' environment variables - update inaccurate CFG_BOOTMAPSZ entry Signed-off-by: NBartlomiej Sieka <tur@semihalf.com>
-
由 Guennadi Liakhovetski 提交于
Restore logic reverted by commit commit 80767a6c Author: Peter Pearse <peter.pearse@arm.com> Date: Wed Sep 5 16:04:41 2007 +0100 Changed API name to coloured_led.h Removed code using deprecated ifdef CONFIG_BOOTBINFUNC Tidied other cpu/arm920t/start.S code Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Mike Frysinger 提交于
There are two NAND entries with ID 0xDC and this obviously causes problems. In the kernel, they punted the first entry, so we should do the same. See this upstream e-mail for more info: http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.htmlSigned-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Shinya Kuribayashi 提交于
Cache operations have to take line address (addr), not start_addr. I noticed this bug when debugging ping failure. Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
-
由 Martin Krause 提交于
Before the first call of ide_reset(), the level of the IDE reset signal on the TQM5200 is low (reset asserted). This patch sets the default value to high (reset not asserted). Currently this patch fixes no real problem, but it is cleaner to assert the reset signal only on demand, and not permanently. Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Detlev Zundel 提交于
Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Detlev Zundel 提交于
The latter name with 13 users is already established, so we will use that. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Martin Krause 提交于
According to the ata (ata5) specification the RESET- signal shall be asserted for at least 25 us. Without this patch, the RESET- signal is asserted on some boards for only < 1 us (e. g. on the TQM5200). This patch adds a general delay of 25 us to the RESET- signal. Without this patch a Platinum 4 GiB CF card is not recognised properly on boards with a TQM5200 (STK52xx, TB5200). Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Sascha Laue 提交于
Signed-off-by: NSascha Laue <sascha.laue@liebherr.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
In function 'logbuff_init_ptrs': cmd_log.c:79: warning: pointer targets in assignment differ in signedness Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Gururaja Hebbar K R 提交于
Signed-off-by: Ngururaja hebbar <gururajakr@sanyo.co.in>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Guennadi Liakhovetski 提交于
These PCI IDs are required by the Linkstation platforms. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
-
由 Joakim Tjernlund 提交于
This avoids an early global data reference. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
-
- 14 4月, 2008 24 次提交
-
-
由 Sascha Laue 提交于
If the hardware watchdog detects a voltage error, the watchdog sets GPIO62 to low. The watchdog POST has to detect this low level. Signed-off-by: NSascha Laue <leglas0@legpc180.leg.liebherr.i>
-
由 Dave Liu 提交于
Current libata.h of u-boot is out of sync from linux kernel, this patch make it be consistent with linux kernel. Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NTor Krill <tor@excito.com>
-
由 Kumar Gala 提交于
The linux kernel is now mostly ARCH=powerpc, so to make life easier allow use to use ARCH=powerpc and convert it to ARCH=ppc. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kyungmin Park 提交于
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Kyungmin Park 提交于
It should access with 16-bit instead of 8-bit Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Kyungmin Park 提交于
It mis-calculates the block address. Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Guennadi Liakhovetski 提交于
This patch is based on the port by Mihai Georgian (see linkstation.c for Copyright information) and implements support for LinkStation / KuroBox HD and HG PPC models from Buffalo Technology, whereby HD is deactivated at the moment, pending network driver fixing. Notice to users: this is pretty much a barebone port. Support for network on HG models is already in the U-Boot mainline, but you might also want patches to switch fan / phy modes depending on the negotiated ethernet parameters. This patch also doesn't support console switching, booting EM mode, Buffalo specific ext2 magic number. So, if you want to use any of those, you need additional patches. Otherwise this patche provides a fully functional u-boot with a network console on your system. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 TsiChung Liew 提交于
Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in cmd_init.c. Add CONFIG_MII_INIT to board configuration files that use mii_init() in cmd_init.c. Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com> Acked-by: NBen Warren <biggerbadderben@gmail.com>
-
由 TsiChung Liew 提交于
Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files. Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
-
由 Kumar Gala 提交于
Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's that have larger physical addresses like 44x, 85xx, and 86xx. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
Some systems have md5.h installed in /usr/include/. This isn't the desired file (we want the one in include/md5.h). This will avoid the conflict. This fixes the host tools building problem by creating a new directory for U-Boot specific header files. [Patch by Andy Fleming, modified to use separate directory by Wolfgang Denk] Signed-off-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NAndy Fleming <afleming@freescale.com> Acked-by: NTimur Tabi <timur@freescale.com>
-
由 Dave Liu 提交于
Signed-off-by: NDave Liu <daveliu@freescale.com>
-
由 Dave Liu 提交于
Signed-off-by: NDave Liu <daveliu@freescale.com>
-
由 Dave Liu 提交于
according to gvb's suggestion, polishing for the doc. Signed-off-by: NJerry Van Baren <gerald.vanbaren@ge.com> Signed-off-by: NDave Liu <daveliu@freescale.com>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 eran liberty 提交于
Adds Support for Altera's Stratix II. Within your board specific init file you will have to call 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); Altera_desc* contines (for example): { Altera_StratixII, /* part type */ passive_serial, /* interface type */ 1, /* bytes of data part can accept */ (void *)(&funcs), /* interface function table */ 0L, /* base interface address */ 0 /* implementation specific cookie */ } funcs is the interface. It is of type altera_board_specific_func. It looks like this: altera_board_specific_func func = { pre_fn, config_fn, status_fn, done_fn, clk_fn, data_fn, abort_fn, post_fn, }; you will have to implement these functions, which is usually bit banging some gpio. Signed-off-by: NEran Liberty <liberty@extricom.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Sascha Hauer 提交于
This patch adds support for the Phytec Phycore-i.MX31 board Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Sascha Hauer 提交于
This patch adds support for the mx31 litekit board Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Sascha Hauer 提交于
This patch adds an i2c driver for Freescale i.MX processors Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Sascha Hauer 提交于
This patch adds the core support for Freescale mx31 Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Wolfgang Denk 提交于
...as suggested by Peter Pearse Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Sascha Hauer 提交于
Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Mike Frysinger 提交于
It isn't generally save to execute applications outside of U-Boot with caches enabled due to the way the Blackfin processor handles caches (requires software assistance). This patch disables caches before booting an ELF or just booting raw code. The previous discussion on the patch was that we wanted to use weaks instead, but that proved to not be feasible when multiple symbols are involved, which puts us back at the ifdef solution. I've minimized the ugliness by moving the setup step outside of the main function. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-