- 21 10月, 2021 3 次提交
-
-
由 Marek Behún 提交于
Move config options CONFIG_LAST_STAGE_INIT and CONFIG_DISPLAY_BOARDINFO_LATE to turris_mox_defconfig. Signed-off-by: NMarek Behún <marek.behun@nic.cz> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Pali Rohár 提交于
There are two Linux ioctls which implements tcsendbreak() functionality: TCSBRK and TCSBRKP TCSBRK with non-zero parameter implements tcdrain() and with zero parameter implements tcsendbreak() for duration of 0.25s. TCSBRKP with zero parameter is same as TCSBRK and with non-zero parameter implements tcsendbreak() for duration in deciseconds specified by parameter. TCSBRKP does not have to be provided by older toolchain versions. So tcsendbreak() has to either use TCSBRK with zero parameter or TCSBRKP with any parameter. Fix code to use TCSBRKP and fallback to TCSBRK with 0. Signed-off-by: NPali Rohár <pali@kernel.org> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Sven Auhagen 提交于
The function show_eeprom is missing int i if debug is enabled. Signed-off-by: NSven Auhagen <sven.auhagen@voleatech.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 20 10月, 2021 1 次提交
-
-
由 Tom Rini 提交于
- Assorted minor fixes and a new GPIO driver
-
- 19 10月, 2021 11 次提交
-
-
由 Samuel Holland 提交于
commit 6bf6d81c ("clk: fixed_rate: add dummy enable() function") implemented .enable, so fixed rate clocks can be used where drivers might call clk_enable(). Implement the .disable op for the same reason; some drivers, e.g. USB PHYs, may attempt to disable clocks at runtime. Signed-off-by: NSamuel Holland <samuel@sholland.org>
-
由 Usama Arif 提交于
The extra 6GB start at 0x8080000000. Signed-off-by: NUsama Arif <usama.arif@arm.com>
-
由 Tom Rini 提交于
While we intentionally set -std=gnu11 for building host tools, and have for quite some time, we never dropped -std=gnu99 from tools/Makefile. This resulted in passing -std=gnu11 ... -std=gnu99 when building, and gnu99 would win. This in turn would result now in warnings such as: tools/mkeficapsule.c:25:15: warning: redefinition of typedef 'u32' is a C11 feature [-Wtypedef-redefinition] typedef __u32 u32; ^ Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Amjad Ouled-Ameur 提交于
This enables the clock controller driver support on TI's SoCs. This will fix this GPIO issue at boot time: request_and_set_gpio: Unable to request GPIO_PR1_MII_CTRL request_and_set_gpio: Unable to request GPIO_MUX_MII_CTRL request_and_set_gpio: Unable to request GPIO_FET_SWITCH_CTRL request_and_set_gpio: Unable to request GPIO_PHY_RESET This issue comes from the fact that the clock controller is not probed. Enable the TI's clock controller driver support to solve this. Signed-off-by: NAmjad Ouled-Ameur <aouledameur@baylibre.com>
-
由 Hannes Schmelzer 提交于
This commit adds support for the MAX7320 (and clones) gpio expander. Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
-
由 Simon Glass 提交于
At present U-Boot always builds dtc if CONFIG_OF_CONTROL is defined, even when DTC is provided. The built dtc is not actually used, so this is a waste of time. Update the Makefile logic to build dtc only if one is not provided to the build with the DTC variable. Add documentation to explain this. This saves about 3.5 seconds of elapsed time on a clean build of sandbox_spl for me. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We need this to make building dtc optional. It makes no sense to build our own dtc if the system one works correctly. This reverts commit ddb87a0b. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
- Clean things up and rework such that we can drop OF_PRIOR_STAGE
-
由 Ilias Apalodimas 提交于
The previous patches removed OF_PRIOR_STAGE from the last consumers of the Kconfig option. Cleanup any references to it in documentation, code and configuration options. Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Ilias Apalodimas 提交于
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. So let's remove the option in an effort to simplify U-Boot's config and DTB management, and use OF_BOARD instead. Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Ilias Apalodimas 提交于
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. On RISC-V some of the boards pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary. So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them. Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NLeo Yu-Chi Liang <ycliang@andestech.com>
-
- 18 10月, 2021 1 次提交
-
-
https://source.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- Fix for Rockchip mmc HS400 mode; - Fix for px30 board Odroid Go; - rockchip_sfc update; - rk3568 clk update; - doc fix;
-
- 16 10月, 2021 2 次提交
-
-
https://source.denx.de/u-boot/custodians/u-boot-tegra由 Tom Rini 提交于
On merge, fixup order of fdtdec_add_reserved_memory parameters in arch/arm/cpu/armv8/fsl-layerscape/soc.c Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Assorted Kconfig migration patches
-
- 15 10月, 2021 22 次提交
-
-
由 Tom Rini 提交于
Resync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Marek Behún 提交于
On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: NMarek Behún <marek.behun@nic.cz>
-
由 Marek Behún 提交于
This config option doesn't do anything. nas220 uses USB_EHCI_MARVELL. Signed-off-by: NMarek Behún <marek.behun@nic.cz>
-
由 Marek Behún 提交于
This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: NMarek Behún <marek.behun@nic.cz>
-
由 Marek Behún 提交于
In preparation for moving this option to Kconfig, rename it to be consistent with other USB EHCI Kconfig options. Signed-off-by: NMarek Behún <marek.behun@nic.cz>
-
由 Yifeng Zhao 提交于
The default configuration of rk3399 EMMC PHY does not enable the strobe line, and EMMC controller will got data transmission error at HS400 mode. Signed-off-by: NYifeng Zhao <yifeng.zhao@rock-chips.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Elaine Zhang 提交于
fix up ppll init freq. support tclk_emmc. add freq (26M) for mmc device. fix up the sfc clk rate unit error. Change in V2: remove change id. Signed-off-by: NElaine Zhang <zhangqing@rock-chips.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Jon Lin 提交于
Using read_poll logic. Tested-by: NChris Morgan <macromorgan@hotmail.com> Signed-off-by: NJon Lin <jon.lin@rock-chips.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Jon Lin 提交于
Set clock related processing into set_speed logic. And Optimize printing format. Tested-by: NChris Morgan <macromorgan@hotmail.com> Signed-off-by: NJon Lin <jon.lin@rock-chips.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Chris Morgan 提交于
The devicetree submitted and approved for the mainline linux kernel is slightly different than the one present here. This syncs both devicetrees (for the Rockchip SFC node at least) present on the PX30 and the Odroid Go Advance. Changes include renaming the flash node, reordering the values in the SFC node for the rk3326-odroid-go2, changing the name of the cs pinctrl node to cs0, and updating the u-boot specific tree to utilize the new flash node value. Signed-off-by: NChris Morgan <macromorgan@hotmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Johan Jonker 提交于
Brand names are supposed to be written with a capital, so change them all. Signed-off-by: NJohan Jonker <jbx6244@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Johan Jonker 提交于
In the list of mainline U-boot supported Rockchip boards rk3188 is placed below under the name rv3188. Give back it's original name and sort the list in alphabetical order. Signed-off-by: NJohan Jonker <jbx6244@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Peter Robinson 提交于
The 64 bit rk33xx chips don't have the ROCKCHIP_USB2_PHY IP so drop the configs as they were likely copied over from other boards during enablement. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Chris Morgan 提交于
Starting with commit 92f1e9a4 ("clk: Detect failure to set defaults") the clk driver for the PX30 would fail to probe for the Odroid Go Advance. This patch is to remove the clock for the GPU from the U-Boot specific devicetree, as that clock is not supported by the U-Boot clk_px30 driver. Signed-off-by: NChris Morgan <macromorgan@hotmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Chris Morgan 提交于
Starting with commit 92f1e9a4 ("clk: Detect failure to set defaults") the clk driver for the PX30 for the Odroid Go Advance would no longer probe correctly, because setting the cpll and gpu clocks are not supported with the clk_px30 U-Boot driver. This adds support for setting the cpll clock to the clk_px30 driver. Another patch will update the U-Boot specific device-tree to remove the GPU clock which is not used by U-Boot. Signed-off-by: NChris Morgan <macromorgan@hotmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_CONS_NONE in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_SYS_FLASH_AMD_CHECK_DQ7 in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_NO_RELOCATION in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
This define was left over from a previous revision, and was never used. Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Remove some config finishing by _ badly added by scripts/build-whitelist.sh when joker is used in comments. for example: doc/uImage.FIT/command_syntax_extensions.txt: ... #ifdef CONFIG_OF_* | ... cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \ FLASH|MMC|FAT|EXT4|\ Remove also configs only used in comments: - CONFIG_BOOGER in include/linux/kconfig.h - CONFIG_COMMANDS - CONFIG_INIT_IGNORE_ERROR - CONFIG_REG_* - CONFIG_HOTPLUG : drivers/watchdog/omap_wdt.c:18 Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
- Update to LLVM-13 in CI, assorted PCI fixes and pytest in CI improvements
-
由 Holger Brunck 提交于
Update the e-mail addresses and person responsible. Signed-off-by: NHolger Brunck <holger.brunck@hitachienergy.com> CC: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> CC: Rainer Boschung <rainer.boschung@hitachienergy.com>
-