- 30 7月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
This commit enables Kconfig. Going forward, we use Kconfig for the board configuration. mkconfig will never be used. Nor will include/config.mk be generated. Kconfig must be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel. We have to generate multiple boot images (Normal, SPL, TPL) from one source tree. Each image needs its own configuration input. Usage: Run "make <board>_defconfig" to do the board configuration. It will create the .config file and additionally spl/.config, tpl/.config if SPL, TPL is enabled, respectively. You can use "make config", "make menuconfig" etc. to create a new .config or modify the existing one. Use "make spl/config", "make spl/menuconfig" etc. for spl/.config and do likewise for tpl/.config file. The generic syntax of configuration targets for SPL, TPL is: <target_image>/<config_command> Here, <target_image> is either 'spl' or 'tpl' <config_command> is 'config', 'menuconfig', 'xconfig', etc. When the configuration is done, run "make". (Or "make <board>_defconfig all" will do the configuration and build in one time.) For futher information of how Kconfig works in U-Boot, please read the comment block of scripts/multiconfig.py. By the way, there is another item worth remarking here: coexistence of Kconfig and board herder files. Prior to Kconfig, we used C headers to define a set of configs. We expect a very long term to migrate from C headers to Kconfig. Two different infractructure must coexist in the interim. In our former configuration scheme, include/autoconf.mk was generated for use in makefiles. It is still generated under include/, spl/include/, tpl/include/ directory for the Normal, SPL, TPL image, respectively. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 22 7月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
There have been /errlog and /reloc_off in the top level .gitignore since commit 1b4aaffe added it about 7 years ago. But they are no longer generated. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 12 6月, 2014 3 次提交
-
-
由 Masahiro Yamada 提交于
All files under spl/ and tpl/ are generated during the build process except spl/Makefile. We can simplify clean-rule and git-ignore by moving spl/Makefile to somewhere else. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
GCC on Cygwin generates executables with .exe extension, for example: scripts/basic/fixdep.exe scripts/docproc.exe To ignore them, *.exe pattern should be moved from tools/.gitignore to ./.gitignore Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This pattern was added by commit cc4f427b to ignore the intermidiate file for generating DTB. When Kbuild was introduced, dts/Makefile was totally re-written. This ignore pattern is already useless. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 13 5月, 2014 1 次提交
-
-
由 Ralph Siemsen 提交于
Trivial fix to .gitignore for spl/Makefile According to the gitignore man page: "An optional prefix "!" which negates the pattern; any matching file excluded by a previous pattern will become included again." ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ So the directory exclude "/spl/*" must come before the exception for spl/Makefile otherwise it has no effect. Signed-off-by: NRalph Siemsen <ralphs@netwinder.org> Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on git v1.7.9.5 / v1.8.3.2]
-
- 11 3月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 22 2月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
U-Boot supports various boot images for various SoCs. It is annoying to modify .gitignore file every time we add/delete boot images. Fortunately, there is a simple rule: Those with file name prefix "u-boot" at the top directory are all generated files. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 20 2月, 2014 3 次提交
-
-
由 Masahiro Yamada 提交于
Useful rules in scripts/Makefile.lib allows us to easily generate a device tree blob and wrap it in assembly code. We do not need to parse a linker script to get output format and arch. This commit deletes ./u-boot.dtb since it is a copy of dts/dt.dtb. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Before this commit, "make tidy" did "make clean" + delete "*.depend*" files. But, we do not have "*.depend*" files any more, which means "make tidy" is the same as "make clean". This commit removes the redandant target "tidy". Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Ignore generated files by Kbuild such as .*.cmd, *.order, etc. Besides above, - Ignore *.s files We do not need to ignore with file name, asm-offsets.s - Do not ignore *.rej (for quilt) - Ignore backup files, \#*# Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 20 1月, 2014 2 次提交
-
-
由 Dan Murphy 提交于
The spl directory is ignored by git as these objects are created during spl creation. The only file not created is the Makefile. This file can be modified and checked in via git. Due to the order of rule precedence having the whole directory ignored first then indicating not to ignore the Makefile is not correct the message to force adding the Makefile is still shown. So reorder the .gitignore for the Makefile and indicate that the Makefile does not need to be ignored first and then indicate everything else in spl should be ignored after wards. Signed-off-by: NDan Murphy <dmurphy@ti.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 16 12月, 2013 1 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 13 12月, 2013 1 次提交
-
-
由 Masahiro Yamada 提交于
Before this commit, output files under tpl/ directry were not ignored. This commit fixes this problem. And we have only one source file under spl/ directory: spl/Makefile So, we can describe .gitignore more simply. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 15 10月, 2013 1 次提交
-
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
- 03 8月, 2013 1 次提交
-
-
由 Stephen Warren 提交于
The invocation of dtc is significantly more complex that it could be, in order to work around an issue on old versions of dtc, which print a message to stdout every time they run. Remove this workaround, on the assumption that people have or will upgrade to a newer version of dtc. This simplifies the build rule significantly. Related, split the invocation of cpp and dtc into separate commands rather than a pipeline, so that if either fail, it is detected. This has the nice benefit of saving off the result of the pre-processing step, allowing it to be easily inspected. Assuming a new enough dtc (which an earlier patch enforces), dtc will parse #line directives in its input file, and generate correct file and line numbers in error messages, even though cpp is unconditionally applied to its input file. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 30 7月, 2013 1 次提交
-
-
由 Justin Waters 提交于
This rule catches images such as MLO.byteswap Signed-off-by: NJustin Waters <justin.waters@timesys.com>
-
- 18 5月, 2013 1 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 06 5月, 2013 1 次提交
-
-
由 Marek Vasut 提交于
The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed, otherwise they have issues with out-of-tree build where elftosb tool couldn't sometimes find the u-boot.bin and spl/u-boot-spl.bin . Preprocess these .bd files with sed and insert full path to u-boot.bin and spl/u-boot-spl.bin to prevent this issue. Moreover, to avoid adding more churn into main Makefile, move all this preprocessing and u-boot.sb generation into CPU directory instead. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: NOtavio Salvador <otavio@ossystems.com.br>
-
- 12 4月, 2013 3 次提交
-
-
由 Benoît Thébaudeau 提交于
This image combines the SPL with the i.MX header, the FCB and U-Boot. For i.MX25/35/51, the FCB is ignored by the boot ROM, so this image is just useful because it can be programmed on a NAND Flash page boundary. For i.MX53, the FCB is required by the boot ROM. This does not support i.MX6 so far because its FCB is more complicated. Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
-
由 Benoît Thébaudeau 提交于
This image combines the SPL with the i.MX header and U-Boot. This is a convenient way of having a single image to program on some boot devices. The i.MX header has to be added to the SPL before appending U-Boot, so that the boot ROM loads only the SPL. Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
-
由 Benoît Thébaudeau 提交于
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
-
- 13 3月, 2013 1 次提交
-
-
由 Albert ARIBAUD 提交于
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type R_ARM_ABS32 to become R_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after. Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC. Conflicts: arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds arch/arm/cpu/armv7/omap-common/u-boot-spl.lds board/ait/cam_enc_4xx/u-boot-spl.lds board/davinci/da8xxevm/u-boot-spl-da850evm.lds board/davinci/da8xxevm/u-boot-spl-hawk.lds board/vpac270/u-boot-spl.lds Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
- 22 1月, 2013 1 次提交
-
-
由 Troy Kisky 提交于
The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
- 07 12月, 2012 1 次提交
-
-
由 Luka Perkov 提交于
u-boot.lst is located in include directory. Update .gitignore file accordingly. Signed-off-by: NLuka Perkov <luka@openwrt.org>
-
- 22 10月, 2012 1 次提交
-
-
由 Marek Vasut 提交于
This patch adds essential components for generation of the contents of the linker section that is used by the linker-generated array. All of the contents is held in a separate file, u-boot.lst, which is generated at runtime just before U-Boot is linked. The purpose of this code is to especially generate the appropriate boundary symbols around each subsection in the section carrying the linker-generated arrays. Obviously, the interim linker code for actual placement of the variables into the section is generated too. The generated file, u-boot.lst, is included into u-boot.lds via the linker INCLUDE directive in u-boot.lds . Adjustments are made in the Makefile and spl/Makefile so that the u-boot.lds and u-boot-spl.lds depend on their respective .lst files. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Tested-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 19 9月, 2012 1 次提交
-
-
由 Marek Vasut 提交于
After removing the Apollon board, remove the OneNAND IPL too. There are no users for it any more. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Minkyu Kang <promsoft@gmail.com> Cc: Tom Rini <trini@ti.com> Acked-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 01 9月, 2012 1 次提交
-
-
由 Sughosh Ganu 提交于
Parameters used for configuring certain SoC peripherals are parsed from the cfg file and appended as part of the ais image's header. The u-boot-spl.ais generated is flashed separately to the nand, so do not delete the file after generation of u-boot.ais. Signed-off-by: NSughosh Ganu <urwithsughosh@gmail.com>
-
- 10 8月, 2012 1 次提交
-
-
由 Timo Ketola 提交于
Signed-off-by: NTimo Ketola <timo@exertus.fi>
-
- 27 3月, 2012 1 次提交
-
-
由 Tom Rini 提交于
The '-fstack-usage' option to gcc will generate .su files, ignore them. Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NTom Rini <trini@ti.com>
-
- 24 12月, 2011 1 次提交
-
-
由 Christian Riesch 提交于
Signed-off-by: NChristian Riesch <christian.riesch@omicron.at> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Mike Frysinger <vapier@gentoo.org>
-
- 11 11月, 2011 1 次提交
-
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
-
- 27 10月, 2011 1 次提交
-
-
由 Simon Glass 提交于
This adds support for an FDT to be build as a separate binary file called u-boot.dtb. This can be concatenated with the U-Boot binary to provide a device tree located at run-time by U-Boot. The Makefile is modified to provide this file in u-boot-dtb.bin. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 18 10月, 2011 1 次提交
-
-
由 Simon Glass 提交于
The dependency rules are currently done in a shell 'for' loop. This does not permit Makefile variables to adjust preprocessor flags as is done with normal compile flags, using the CFLAGS_path/file.o syntax. This change moves the dependency generation into the Makefile itself, and permits a CPPFLAGS_path/file.o to adjust preprocessor flags on a file or directory basis. The CPPFLAGS_... variable is also folded into CFLAGS during the build. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 07 10月, 2011 1 次提交
-
-
由 Laurence Withers 提交于
The generated file asm-offsets.s may be found at various depths in the arch subdirectories, so simply ignore it throughout the tree. Signed-off-by: NLaurence Withers <lwithers@guralp.com> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
- 01 10月, 2011 1 次提交
-
-
由 Joe Hershberger 提交于
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Sandeep Paulraj <s-paulraj@ti.com>
-
- 22 9月, 2011 1 次提交
-
-
由 Mike Frysinger 提交于
Recent commit a4814a69 cleaned up generation of asm-offsets.s for SoC dirs, but missed adding it to the ignore list which makes it show up in `git status`. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 28 7月, 2011 1 次提交
-
-
由 Heiko Schocher 提交于
creating an u-boot.ubl file, which contains the UBL Header needed for booting from NAND with the RBL from TI. For more information read doc/README.ublimage. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 23 5月, 2011 1 次提交
-
-
由 ecc 提交于
This patch adds additional u-boot.* files mentioned in Makefile, and adds *.bin since these are deleted as part of "make clean". Signed-off-by: NEric Cooper <ecc@cmu.edu>
-