"clksel_val" is assigned to property of mmc or defined value.
But it doesn't write at initial sequence.
There is a reason that get the wrong source-clock value.
This patch fixed it.
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>

If mode is not DDR-mode, then it needs to clear it.
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>

The SD/MMC version scheme was buggy when dealing with standard
major.minor.change cases. Fix it by using something similar to
the linux's kernel versioning method.
Signed-off-by: NPantelis Antoniou <pantelis.antoniou@konsulko.com>
Tested-by: NJaehoon Chung <jh80.chung@samsung.com>
Reported-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

USB doesn't seem to work yet; the controller detects the on-board Hub/
Ethernet device but can't read the descriptors from it. I haven't
investigated yet.
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>

The bcm2835 and bcm2836 are essentially identical, except:
- The CPU is an ARM1176 v.s. a quad-core Cortex-A7.
- The physical address of many IO controllers has moved.

Rather than introducing a whole new bcm2836 value for $(SOC) or $(ARCH),
update the existing bcm2835 code to handle the minor differences, and
plumb it into the ARMv7 CPU architecture.
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>

Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>

This commit adds $(srctree)/arch/arm/$(machdirs)/include/mach to
the headers search path.

It allows us to replace "#include <asm/arch/foo.h>" with
"#include <mach/foo.h>".  As "#include <asm/arch/foo.h>" is still
supported, we can modify each file one by one.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

Move arch/arm/include/asm/arch-keystone/*
  -> arch/arm/mach-keystone/include/mach/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>

Move arch/arm/include/asm/arch-orion5x/*
  -> arch/arm/mach-orion5x/include/mach/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

Move arch/arm/include/asm/arch-nomadik/*
  -> arch/arm/mach-nomadik/include/mach/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>
Cc: Alessandro Rubini <rubini@unipv.it>

Move arch/arm/include/asm/arch-kirkwood/*
  -> arch/arm/mach-kirkwood/include/mach/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NStefan Roese <sr@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>

Move arch/arm/include/asm/arch-davinci/*
  -> arch/arm/mach-davinci/include/mach/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>

Move arch/arm/include/asm/arch-at91/*
  -> arch/arm/mach-at91/include/mach/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com>

In U-Boot, SoC-specific headers are placed in
arch/$(ARCH)/include/asm/arch-$(SOC) and a symbolic link to that
directory is created at the early stage of the build process.

Creating and removing a symbolic link during the build is not
preferred.  In fact, Linux Kernel did away with include/asm-$(ARCH)
directories a long time time ago.

As for ARM, now it is possible to collect SoC sources into
arch/arm/mach-$(SOC).  It is also reasonable to move SoC headers
into arch/arm/mach-$(SOC)/include/mach.

This commit prepares for that.
If the directory arch/$(ARCH)/mach-$(SOC)/include/mach exists,
a symbolic to that directory is created.  Otherwise, a symbolic link
to arch/$(ARCH)/include/asm/arch-$(SOC) or arch-$(CPU) is created.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

Move
arch/arm/cpu/armv7/keystone/* -> arch/arm/mach-keystone/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>

Move
arch/arm/cpu/arm926ejs/versatile/* -> arch/arm/mach-versatile/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

Move
arch/arm/cpu/arm926ejs/orion5x/* -> arch/arm/mach-orion5x/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

Move
arch/arm/cpu/armv7/highbank/* -> arch/arm/mach-highbank/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Rob Herring <robh@kernel.org>

Move
arch/arm/cpu/arm926ejs/nomadik/* -> arch/arm/mach-nomadik/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>
Cc: Alessandro Rubini <rubini@unipv.it>

Move
arch/arm/cpu/arm926ejs/kirkwood/* -> arch/arm/mach-kirkwood/*

Note:
 Perhaps, can we merge arch/arm/mach-kirkwood and
 arch/arm/mvebu-common into arch/arm/mach-mvebu, like Linux?
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NStefan Roese <sr@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>

Move
arch/arm/cpu/arm926ejs/davinci/* -> arch/arm/mach-davinci/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>

This commit moves files as follows:

 arch/arm/cpu/arm720t/tegra20/*      -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/arm720t/tegra30/*      -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/arm720t/tegra114/*     -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/arm720t/tegra124*      -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/arm720t/tegra-common/* -> arch/arm/mach-tegra/*
 arch/arm/cpu/armv7/tegra20/*        -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/armv7/tegra30/*        -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/armv7/tegra114/*       -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/armv7/tegra124/*       -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/armv7/tegra-common/*   -> arch/arm/mach-tegra/*
 arch/arm/cpu/tegra20-common/*       -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/tegra30-common/*       -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/tegra114-common/*      -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/tegra124-common/*      -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/tegra-common/*         -> arch/arm/mach-tegra/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Simon Glass <sjg@chromium.org> [ on nyan-big ]
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>

This commit moves source files as follows:

  arch/arm/cpu/arm920t/at91/*   -> arch/arm/mach-at91/arm920t/*
  arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/*
  arch/arm/cpu/armv7/at91/*     -> arch/arm/mach-at91/armv7/*
  arch/arm/cpu/at91-common/*    -> arch/arm/mach-at91/*
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NAndreas Bießmann <andreas.devel@googlemail.co>

In U-boot, the directory structure, arch/$(ARCH)/cpu/$(CPU)/$(SOC)/
has been adopted except that $(CPU) is missing from some
architectures and $(SOC) is missing from some CPUs.

This structure did not fit very well in some cases.

[1] AT91

AT91 SoC family have been developed across some ARM processor
generations.  Generally speaking, some IPs are often re-used in the
same SoC family (same SoC vendor) even when the main processor is
updated.  As a result, a SoC-common directory is needed in the upper
level.  Currently, AT91 source files are placed as follows:

  arch/arm/cpu/arm920t/at91/*
  arch/arm/cpu/arm926ejs/at91/*
  arch/arm/cpu/armv7/at91/*
  arch/arm/cpu/at91-common/*

Once directories are split, the motivation for refactorings across
CPU directories is lost.  Some files in arm920t/at91/ and
arm926ejs/at91/ are so similar that they could be merged.

[2] Tegra

Tegra is a little bit special case where different CPUs are used for
SPL and the main U-boot.  To obey the arch/$(ARCH)/cpu/$(CPU)/$(SOC)
structure, the source files must be placed across the CPUs,
again SoC-common directory is necessary in the upper level.

Moreover, there are several families in Tegra: Tegra20, Tegra30,
Tegra114, Tegra124.  Here again, the tegra-common directory is needed
to contain commonly-used files.

Tegra directories have been sprinkled in the directory structure.

  arch/arm/cpu/arm720t/tegra20
  arch/arm/cpu/arm720t/tegra30
  arch/arm/cpu/arm720t/tegra114
  arch/arm/cpu/arm720t/tegra124
  arch/arm/cpu/arm720t/tegra-common
  arch/arm/cpu/armv7/tegra20
  arch/arm/cpu/armv7/tegra30
  arch/arm/cpu/armv7/tegra114
  arch/arm/cpu/armv7/tegra124
  arch/arm/cpu/armv7/tegra-common
  arch/arm/cpu/tegra20-common
  arch/arm/cpu/tegra30-common
  arch/arm/cpu/tegra114-common
  arch/arm/cpu/tegra124-common
  arch/arm/cpu/tegra-common

As you see, splitting SoC code by the CPU is not going well,
especially for ARM.
Why don't we collect SoC-specific files into a single place?

A good example we can follow is Linux's arch/arm/mach-* structure.

This item was discussed in the following thread:
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/188548/

Looks like I got some positive responses and we are almost ready to
start this movement.

This commit prepares arch/arm/Makefile for describing machdirs in it.

After this commit, we can move SoC directory to arch/arm/mach-$(SOC)
in simple steps although some cases such as AT91 and Tegra need more
fixes.

What we generally have to do is:

[1] Move files arch/arm/cpu/$(CPU)/$(SOC)/* to arch/arm/mach-$(SOC)/*
[2] Add machine entry into arch/arm/Makefile
[3] Remove "obj-y += $(SOC)" from arch/arm/cpu/$(CPU)/Makefile
[4] Fix the Kconfig file path in arch/arm/Kconfig
[5] Modify MAINTAINERS if necessary
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

The board select menu in arch/arm/Kconfig is still big.
To slim down it, this commit moves AT91 boards to
arch/arm/mach-at91/Kconfig.
Also, consolidate "config SYS_SOC" in each board Kconfig.

The Kconfig files under board/ directory were modified with the
following command:

    find board -name Kconfig | xargs sed -i -e '
    /config SYS_SOC/ {
        N
        /default "at91"/ {
            N
            d
        }
    }
    '
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NAndreas Bießmann <andreas.devel@googlemail.co>

Since device_unbind() is also defined in device-remove.c,
which is compiled in only in case CONFIG_DM_DEVICE_REMOVE
is defined, protect the device_unbind() prototype with the
same CONFIG_DM_DEVICE_REMOVE check.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Add debug UART functions to permit ns16550 to provide an early debug UART.
Try to avoid using the stack so that this can be called from assembler before
a stack is set up (at least on ARM and PowerPC).
Signed-off-by: NSimon Glass <sjg@chromium.org>

For the debug UART we need to be able to provide any parameters before
driver model is set up. Add parameters to the low-level access functions
to make this possible.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This came up in a discussion on the mailing list here:

https://patchwork.ozlabs.org/patch/384613/

My concerns at the time were:
- it doesn't need to be written in assembler
- it doesn't need to be ARM-specific

This patch provides a possible alternative. It works by allowing any serial
driver to export one init function and provide a putc() function. These
can be used to output debug data before the real serial driver is available.

This implementation does not depend on driver model, and it is possible for
it to operate without a stack on some architectures (e.g. PowerPC, ARM). It
provides the same features as the ARM-specific debug.S but with more UART
and architecture support.
Signed-off-by: NSimon Glass <sjg@chromium.org>

[ imported from Linux Kernel, commit 74981fb81d83 ]
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NSimon Glass <sjg@chromium.org>

Use Kconfig instead of board config for DM and DM_THERMAL.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Make this option available in Kconfig and clean up the board that uses it.
Note there is also an entry in exynos5-common.h but this affects multiple
boards and should be dropped as part of the Samsung I2C migration to
driver model.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Since both I2C and SPI are converted to Kconfig, we can convert cros_ec
to Kconfig for these buses.

LPC will need to wait until driver mode PCI is available.
Signed-off-by: NSimon Glass <sjg@chromium.org>

I2C chips do exist that require a write of some multi-byte data to occur in
a single bus transaction (aka atomic transfer), otherwise either the write
does not come into effect at all, or normal operation of internal circuitry
cannot be guaranteed. The current implementation of the 'i2c write' command
(transfer of multiple bytes from a memory buffer) in fact performs a separate
transaction for each byte to be written and thus cannot support such types of
I2C slave devices.

This patch provides an alternative by allowing 'i2c write' to execute the
write transfer of the given number of bytes in a single bus transaction if
the '-s' option is specified as a final command argument. Else the current
re-addressing method is used.
Signed-off-by: NLubomir Popov <l-popov@ti.com>

hs: adapt to CONFIG_DM_I2C

If the i2c driver returns an error status, error out immediately.
Continuing the loop just results in printing error messages
again and again.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

If you want to inspect the control device tree using the fdt command,
the "fdt address -c" command previously unhelpfully printed the phys
memory address of the device tree. That address could not then be used
to set the fdt address for inspection. Changed the resulting print to
one that can be copied directly to the 'fdt address <addr>' command.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Commit 90bac29a claims to fix this bug
that was introduced in commit a92fd657
but doesn't actually make the change that the commit message describes.

Actually fix the bug this time.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NSimon Glass <sjg@chromium.org>