- 10 5月, 2008 16 次提交
-
-
由 Stelian Pop 提交于
This patch adds support for the ATMEL LCDC driver which is used on some AT91 and AVR platforms. Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK board. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK board. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK board. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND in order to cope with the changes in DataFlash partitionning scheme (cset c3a60cb3). Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from DataFlash or from NAND), and gives to Linux a fully specified mtdparts variable. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch changes the SPI timings to closely match the ones used by the Linux kernel and the Atmel's own bootstrap project. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
The Atmel boards can handle 8 or 16 bit NAND memories. This patch makes the support configurable in the board config header file (CFG_NAND_DBW_8 or CFG_NAND_DBW_16). Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND in order to cope with the changes in DataFlash partitionning scheme (cset c3a60cb3). Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from DataFlash or from NAND), and gives to Linux a fully specified mtdparts variable. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
This patch changes the SPI timings to closely match the ones used by the Linux kernel and the Atmel's own bootstrap project. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
The Atmel boards can handle 8 or 16 bit NAND memories. This patch makes the support configurable in the board config header file (CFG_NAND_DBW_8 or CFG_NAND_DBW_16). Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch below avoids the duplication of u-boot.lds by putting the file in the cpu directory instead of the board one. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete copyright notice. This patch adds the missing pieces. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
When Ulf did the dataflash.c cleanup, he didn't add his copyright on the new created files. This patch fixes the problem. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Stelian Pop 提交于
When doing the AT91CAP9/AT91SAM9 port, a number of header files were copied from the Linux kernel sources. This patch explicitly specifies this origin for all the copied headers, and for those missing copyright information, adds it. Additionaly, the header file 'at91sam926x_mc.h' has been superceeded in the latest kernel sources by 'at91sam9_smc.h'. The copyright information has been confirmed by the AT91 Linux kernel maintainer, Andrew Victor <avictor.za@gmail.com>. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 09 5月, 2008 1 次提交
-
-
由 Stelian Pop 提交于
When applying the AT91CAP9 patches upstream, something transformed the '@' character into the ' <at> ' sequence. The patch below restores the original form in all the places where it has been modified (the AT91CAP9 files, the AT91SAM9260 files which were copied from AT91CAP9, and a couple of other files where the ' <at> ' sequence was present). Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 05 5月, 2008 4 次提交
-
-
-
由 Vlad Lungu 提交于
.gpword works only with local symbols on certain binutils versions Signed-off-by: NVlad Lungu <vlad.lungu@windrvier.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 04 5月, 2008 19 次提交
-
-
由 Wolfgang Denk 提交于
Update ChNAGELOG, minor white space cleanup. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
Some systems are dumb and do not implement the -n flag to echo (like OS X). Convert the Makefile to use printf as this should work everywhere. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
If you enable environment in the flash, but disable the embedded option, and you disable the saveenv command, then the #if nested logic will trigger a compile failure: env_flash.c: In function 'env_relocate_spec': env_flash.c:399: error: 'flash_addr' undeclared (first use in this function) The fix is to add CMD_SAVEENV ifdef protection like everywhere else. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Jeremy McNicoll 提交于
Fix incorrect mask to enable all 64MB of onboard flash. Previously U-Boot incorrectly mapped only 8MB of flash, this patch correctly maps all the available flash. Signed-off-by: NJeremy McNicoll <jeremy.mcnicoll@windriver.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
-
由 Marcel Ziswiler 提交于
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Mike Frysinger 提交于
The mmap() related code is full of inconsistent casts/constants when it comes to error checking, and may break when building on some systems (like ones that do not implicitly define the caddr_t type). Let's just avoid the whole mess by writing the code nice and clean in the first place. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Marcel Ziswiler 提交于
- warning: 'srom' defined but not used Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Marcel Ziswiler 提交于
- warning: implicit declaration of function ‘serial_initialize’ Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Andre Schwarz 提交于
The Vitesse VSC8601 RGMII PHY has internal delay for both Rx and Tx clock lines. They are configured using 2 bits in extended register 0x17. Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay. Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: NAndy Fleming <afleming@freescale.com> Acked-by: NBen Warren <biggerbadderben@gmail.com> -- drivers/net/tsec.c | 6 ++++++ drivers/net/tsec.h | 3 +++ 2 files changed, 9 insertions(+), 0 deletions(-)
-
由 Wolfgang Denk 提交于
This reverts commit b7166e05 (replaced by commit c4e5f52a).
-
由 Wolfgang Denk 提交于
Some config.mk files reference $(CC) to test for specific tool chain features, so make sure $(CC) gets set before including any such config files. This patch replaces commit b7166e05 ("ColdFire: Get information from the correct GCC"). Signed-off-by: NWolfgang Denk <wd@denx.de>
-
start.S:183:1: warning: "ICMR" redefined In file included from start.S:33: include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition start.S:187:1: warning: "RCSR" redefined ... Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Kumar Gala 提交于
Make the flags use -Os like all other boards Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
-