- 06 1月, 2015 35 次提交
-
-
由 Nishanth Menon 提交于
Part of DMM logic is reuse from commit 47a4bea6 ("ARM: omap4: Update sdram setting for panda rev A6") Which broke SDP4430 with ES2.3 (uses old DDR). So, to maintain support for newer DDR used in Panda ES rev B3, we should, in addition to the commit 675cc77a ("ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM"), DDR timings, also do DMM configuration specific to Panda. Signed-off-by: NNishanth Menon <nm@ti.com>
-
由 Tom Rini 提交于
The gd will be cleared at first so we don't need to set arch.tbl to 0. In addition, the checks later against lastinc also work fine with an initial value of 0 here. This also brings us in line with sunxi code for example. Signed-off-by: NTom Rini <trini@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
In both SPL and non-SPL cases we will make a call to timer_init() early on and do not need to call it again within s_init(). Signed-off-by: NTom Rini <trini@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
The save_boot_params function here is the same as the default weak one from arch/arm/cpu/armv7/start.S, drop. Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@ti.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Hua Yanghao 提交于
Instead of setting working_fdt to map_sysmem(addr) (e.g. blob), it should be set to addr directly as inside set_working_fdt_addr it uses map_sysmem(addr) again. To test: ./u-boot -d dts/dt.bin , then issue: fdt addr 0x100, fdt print will then cause an segmentation fault. After this fix fdt print is functional.
-
由 Ian Campbell 提交于
Commit 8bc347e2 "ARM: bootm: Allow booting in secure mode on hyp capable systems" added the capability to select nonsec vs sec mode boot via an environment var. There is a subtle gotcha with this functionality, which is that the PSCI nodes are still created in the fdt (via armv7_update_dt->fdt_psci) even when booting in secure mode. Which means that if the kernel is PSCI aware then it will fail to boot because it will try and do PSCI from secure world, which won't work. This likely didn't get noticed before because the original purpose was to support booting the legacy linux-sunxi kernels which don't understand PSCI. To fix expose boot_nonsec (renaming with armv7_ prefix) outside of bootm.c and use from the virt-dt code. As well as avoiding the creation of the PSCI nodes we should also avoid reserving the secure RAM, so do so. Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
由 Anthoine Bourgeois 提交于
Signed-off-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
-
由 Alexey Brodkin 提交于
For all flavours of ARC we execute the same code in "bdinfo" so we may safely check for CONFIG_ARC. This is especially important since we're about to add more types of ARC so existing check won't work in all cases. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: Tom Rini <trini@ti.com>
-
由 Nikita Kiryanov 提交于
Convert cm-t35 to generic board. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@ti.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Masahiro Yamada 提交于
All the MPC824X boards are still non-generic boards: A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245 Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Josef Wagner <Wagner@Microsys.de> Cc: Torsten Demke <torsten.demke@fci.com> Cc: Jim Thompson <jim@musenki.com> Cc: Greg Allen <gallen@arlut.utexas.edu>
-
由 Masahiro Yamada 提交于
These boards are still non-generic boards. drivers/rtc/ds12887.c should also be removed because it can not be built without CONFIG_ATC. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
These boards are still non-generic boards. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Oliver Brown <obrown@adventnetworks.com>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Grandegger <wg@denx.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Heiko Schocher <hs@denx.de>
-
由 Masahiro Yamada 提交于
These boards are still non-generic boards. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rune Torgersen <runet@innovsys.com>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Frank Panno <fpanno@delphintech.com>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Brad Kemp <Brad.Kemp@seranoa.com>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
-
由 Masahiro Yamada 提交于
These boards are still non-generic boards. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Murray Jensen <Murray.Jensen@csiro.au>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Conn Clark <clark@esteem.com>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Pantelis Antoniou <panto@intracom.gr>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Unused code in arch/powerpc/cpu/mpc8xx/video.c should be also deleted because CONFIG_VIDEO_ENCODER_AD7176, CONFIG_VIDEO_ENCODER_AD7177, CONFIG_VIDEO_ENCODER_AD7179 are not defined any more. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
These boards are still non-generic boards. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Klaus Heydeck <heydeck@kieback-peter.de>
-
由 Masahiro Yamada 提交于
This board is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: The LEOX team <team@leox.org>
-
由 Masahiro Yamada 提交于
These boards are still non-generic boards. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de>
-
由 Masahiro Yamada 提交于
These boards are still non-generic boards. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
- 05 1月, 2015 1 次提交
-
-
- 02 1月, 2015 2 次提交
-
-
- 01 1月, 2015 2 次提交
-
-
git://git.denx.de/u-boot-usb由 Tom Rini 提交于
Conflicts: include/configs/arndale.h Signed-off-by: NTom Rini <trini@ti.com>
-
由 Rene Griessl 提交于
Patch enables AX88179 driver for ARNDALE 5250 Signed-off-by: NRene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
-