- 15 11月, 2012 30 次提交
-
-
由 Rajeshwari Shinde 提交于
This patch enables sound support for EXYNOS5 Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NChander Kashyap <chander.kashyap@linaro.org> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds clock support for I2S Signed-off-by: NR. Chandrasekar <rcsekar@samsung.com> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds base address for I2S Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NChander Kashyap <chander.kashyap@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds pinmux support for I2S1 Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds the audio parameters required by the I2S to play the predefined audio data. Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch add I2S registers Signed-off-by: NR. Chandrasekar <rcsekar@samsung.com> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds command to test audio playback. sound init - Initialises the audio subsystem (i2s and wm8994 codec) sound play - Plays predefined the audio data when specified length and frequency. Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds driver for audio codec WM8994 Signed-off-by: NR. Chandrasekar <rcsekar@samsung.com> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds driver for I2S interface specific to samsung. Signed-off-by: NR. Chandrasekar <rcsekar@samsung.com> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
This patch add support for display on Universal C210 board. Width of displyed logo must be not bigger than 480 pixel and is limited by width of the screen. Tizen logo size is 520x120 pixels and should be resized. Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
This patch fixes image position on screen when images's height or width is biger then the lcd's. Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> CC: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
Add LDO7 and LDO17 macros to max8998_pmic.h necessary to power on the LCD. Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
This patch use software spi on Samsung Universal C210 board. Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Minkyu Kang 提交于
This patch is fixing the following errors s3c64xx.c:175: error: variable 's3c64xx_serial_drv' has initializer but incomplete type s3c64xx.c:176: error: unknown field 'name' specified in initializer s3c64xx.c:176: warning: excess elements in struct initializer s3c64xx.c:176: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:177: error: unknown field 'start' specified in initializer s3c64xx.c:177: warning: excess elements in struct initializer s3c64xx.c:177: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:178: error: unknown field 'stop' specified in initializer s3c64xx.c:178: warning: excess elements in struct initializer s3c64xx.c:178: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:179: error: unknown field 'setbrg' specified in initializer s3c64xx.c:179: warning: excess elements in struct initializer s3c64xx.c:179: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:180: error: unknown field 'putc' specified in initializer s3c64xx.c:180: warning: excess elements in struct initializer s3c64xx.c:180: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:181: error: unknown field 'puts' specified in initializer s3c64xx.c:181: warning: excess elements in struct initializer s3c64xx.c:181: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:182: error: unknown field 'getc' specified in initializer s3c64xx.c:182: warning: excess elements in struct initializer s3c64xx.c:182: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:183: error: unknown field 'tstc' specified in initializer s3c64xx.c:183: warning: excess elements in struct initializer s3c64xx.c:183: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c: In function 's3c64xx_serial_initialize': s3c64xx.c:188: warning: implicit declaration of function 'serial_register' s3c64xx.c: At top level: s3c64xx.c:191: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'struct' Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Ashok Kumar Reddy 提交于
arch_cpu_init() is removed from cpu level to SOC level for arm1176 in commit 4ea6d6b,the same is done for s3c64xx Signed-off-by: NAshok Kumar Reddy <ashokkourla2000@gmail.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch enables MAX77686 pmic chip for SMDK5250. Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds driver and register definitions for PMIC chip MAX77686. Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NLukasz Majewski <l.majewski@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marex@denx.de> Cc: David Müller <d.mueller@elsoft.ch> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: U-Boot DM <u-boot-dm@lists.denx.de> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Minkyu Kang 提交于
Moved the common code to calculate pll clock rate to new function exynos_get_pll_clk(). Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
-
由 Minkyu Kang 提交于
Based upon single SoC there can be multiple variants. This patch add support to match the complete product ID. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
-
由 Piotr Wilczek 提交于
This patch turns power down for unused core 1 Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
Low level initialisation is done by another bootloader Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
This patch use the pinmux for mmc configuration for Universal C210 Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
This patch use the pinmux for mmc configuration for Trats Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
This patch add pinmux settings for Exynos4 for mmc0 and mmc2 Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
Full 1GiB is visible Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Piotr Wilczek 提交于
SDRAM setup alike to ORIGEN Dev board. Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Chander Kashyap 提交于
Add PXE support for the Exynos5250. Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Łukasz Majewski 提交于
Now proper GPIO parts numbering is handled at Samsung devices. This fix is necessary for code using GPIO located at other banks than first. Test HW: - Exynos4210 - Trats - S5PC110 - goni Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 10 11月, 2012 6 次提交
-
-
由 Benoît Thébaudeau 提交于
enable_caches() did not enable icache if CONFIG_SYS_ICACHE_OFF was not defined but CONFIG_SYS_DCACHE_OFF was. Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
-
由 Troy Kisky 提交于
Only the values used in the sabrelite board are added currently. Add more as other boards use them. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Troy Kisky 提交于
Read memory setup registers to determine size of available ram. This routine works for mx53/mx6x I need this because when mx6solo called get_ram_size with a too large maximum size, the system hanged. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Troy Kisky 提交于
Use CONFIG_MX6 when the particular processor variant isn't important. Reserve the use of CONFIG_MX6Q to specifically test for quad cores variant. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Troy Kisky 提交于
Previously, the same value was returned for both mx6dl and mx6solo. Check number of processors to differeniate. Also, a freescale patch says that sololite has its cpu/rev stored at 0x280 instead of 0x260. I don't have a sololite to verify. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
-
- 09 11月, 2012 1 次提交
-
-
- 08 11月, 2012 3 次提交
-
-
由 Anatolij Gustschin 提交于
commit 199adb60 "common/misc: sparse fixes" broke the help command trying to fix the sparse error "command.c:44:38: error: bad constant expression". As Henrik points out, the fix was bad because the commit used CONFIG_SYS_MAXARGS whereas the code intended to use the maximum number of commands (not arguments to a command). Revert command.c changes to the original code as asked by Wolfgang. Reported-by: NHenrik Nordström <henrik@henriknordstrom.net> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Michal Simek 提交于
Microblaze platform can use CONFIG_OF_EMBED option but also it is necessary to support boards which don't want to use this option. U-Boot doesn't compile dts/libdts.o for #undef CONFIG_OF_EMBED case that's why it should be guarded by ifdef. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
The patch "include/linux/byteorder: import latest endian definitions from linux" (sha1: eef1cf2d) Introduced a lot of compilation failures with unknow types. include/linux/byteorder/big_endian.h:45:1: error: unknown type name '__le64' include/linux/byteorder/big_endian.h: In function '__cpu_to_le64p': include/linux/byteorder/big_endian.h:47:18: error: '__le64' undeclared (first use in this function) include/linux/byteorder/big_endian.h:47:18: note: each undeclared identifier is reported only once for each function it appears in include/linux/byteorder/big_endian.h:47:25: error: expected ';' before '__swab64p' include/linux/byteorder/big_endian.h: At top level: include/linux/byteorder/big_endian.h:49:1: error: unknown type name '__le64' include/linux/byteorder/big_endian.h:53:1: error: unknown type name '__le32' include/linux/byteorder/big_endian.h: In function '__cpu_to_le32p': include/linux/byteorder/big_endian.h:55:18: error: '__le32' undeclared (first use in this function) include/linux/byteorder/big_endian.h:55:25: error: expected ';' before '__swab32p' include/linux/byteorder/big_endian.h: At top level: include/linux/byteorder/big_endian.h:57:1: error: unknown type name '__le32' include/linux/byteorder/big_endian.h:61:1: error: unknown type name '__le16' ... Removing asm/bitops.h solved this problem. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-