- 04 6月, 2018 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 4月, 2018 1 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: NAdam Ford <aford173@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 4月, 2018 1 次提交
-
-
由 Marek Vasut 提交于
Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
- 09 4月, 2018 2 次提交
-
-
由 Alex Kiernan 提交于
Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NPetr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
-
由 Alex Kiernan 提交于
This converts CONFIG_DRIVER_TI_CPSW to Kconfig Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 08 4月, 2018 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 16 3月, 2018 1 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 2月, 2018 1 次提交
-
-
由 Tom Rini 提交于
A number of platforms include config_distro_defaults.h but do not enable CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and re-sync config files. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 1月, 2018 1 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_OMAP_USB_PHY Signed-off-by: NAdam Ford <aford173@gmail.com>
-
- 13 12月, 2017 1 次提交
-
-
由 Tuomas Tynkkynen 提交于
And use 'imply' liberally. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
- 11 10月, 2017 1 次提交
-
-
由 Tuomas Tynkkynen 提交于
Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
- 08 9月, 2017 2 次提交
-
-
由 Chris Packham 提交于
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig. Update defconfigs. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Chris Packham 提交于
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and LAN78XX options under new menu. Finally update the defconfigs that need CONFIG_USB_HOST_ETHER. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 28 8月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 15 8月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 8月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_PCA953X Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 08 8月, 2017 1 次提交
-
-
由 Alexandru Gagniuc 提交于
Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 26 7月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 06 6月, 2017 2 次提交
-
-
由 Uri Mashiach 提交于
Change the shell prompt to "U-Boot# ". Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Uri Mashiach 提交于
Supported boot devices are raw QSPI and raw SD card. Add support for a FAT16/32 file system for SD card. The SOC's boot ROM only supports FAT file system. Therefore remove the SPL support for the EXT file system. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 04 6月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Now that these symbols are in Kconfig, migrate all users. Use imply on a number of platforms that default to having this enabled. As part of this we must migrate some straglers for CMD_FAT and DOS_PARTITION. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 22 5月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_EEPROM CONFIG_CMD_EEPROM_LAYOUT CONFIG_EEPROM_LAYOUT_HELP_STRING Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval platforms] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 5月, 2017 2 次提交
-
-
由 Uri Mashiach 提交于
Add CONFIG_CMD_USB to the defconfig file. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Uri Mashiach 提交于
Add CONFIG_USB_STORAGE to the defconfig file. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 28 4月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 14 3月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 1月, 2017 3 次提交
-
-
由 Patrick Delaunay 提交于
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Patrick Delaunay 提交于
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay73@gmail.com>
-
由 Patrick Delaunay 提交于
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay73@gmail.com>
-
- 22 1月, 2017 1 次提交
-
-
由 Uri Mashiach 提交于
Move all of the status LED feature to drivers/led/Kconfig. The LED status definitions were moved from the board configuration files to the defconfig files. TBD: Move all of the definitions in the include/status_led.h to the relevant board's defconfig files. Tested boards: CL-SOM-AM57x, CM-T335 Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il>
-
- 11 1月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
Move (and rename) the following CONFIG options to Kconfig: CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI) CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS) CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC) CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS) CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA) CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI) They are the same option names as used in Linux. This commit was created as follows: [1] Rename the options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g ' [2] Commit the changes [3] Create entries in driver/mmc/Kconfig. (copied from Linux) [4] Move the options with the following command tools/moveconfig.py -y -r HEAD \ MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI [5] Sort and align drivers/mmc/Makefile for readability Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
- 03 1月, 2017 1 次提交
-
-
由 Dmitry Lifshitz 提交于
Features supported : * Serial console * SPI Flash * MMC/SD Card * eMMC storage * SATA * PCA9555 - GPIO expander over I2C5 bus * USB Use spl alternate boot device feature to define fallback to the main boot device as it is defined by hardware. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> [uri.mashiach@compulab.co.il: Adjust to v2016.11] Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 19 11月, 2016 1 次提交
-
-
由 Semen Protsenko 提交于
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 24 10月, 2016 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_INFO_QUIET Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Make this default n, re-run the migration] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 9月, 2016 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 17 9月, 2016 3 次提交
-
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 10 9月, 2016 2 次提交
-
-
由 Heiko Schocher 提交于
move VERSION_VARIABLE from board config file into a Kconfig option. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Tom Rini 提交于
In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-