introduce serial_exit for this purpose. Use it only when the rm9200
serial driver is active
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

add CONFIG_AT91RM9200_USART to activate the driver
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

The AT91RM9200-EK Evaluation Board supports the AT91RM9200
ARM9-based 32-bit RISC microcontroller and enables real-time code development
and evaluation.

Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507

with
	- NOR (cfi driver)
	- DataFlash
	- USB OHCI
	- Net
	- I2C (hard)
Signed-off-by: NUlf Samuelsson <ulf@atmel.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This is required so that the MAC address will be updated in the device tree.
Signed-off-by: NScott Wood <scottwood@freescale.com>

PCI on PQ2FADS is very similar to PCI on MPC8272ADS.
Signed-off-by: NScott Wood <scottwood@freescale.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Include <netinet/in.h> instead of <linux/in.h> to get htons()
prototpye.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Since commit a706bfc7 common/env_embedded.o and tools/envcrc were
only built when CONFIG_ENV_IS_EMBEDDED was set, but this breaks
building for many boards.

We always have to build these files when CONFIG_ENV_IS_IN_FLASH is
set.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Some systems have zlib.h installed in /usr/include/. This isn't the
desired file for u-boot code - we want the one in include/zlib.h.
This rename will avoid the conflict.
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Instead of special casing the different access patterns, use common
code with light macros sprinkled in to accomodate for the different
layouts of the register structure.

Note that this also changes the types of the registers for the
"positively packed (>1)" cases.  As the registers truly are unsigned
chars, this is surely the Right Thing, but it is a semantic change.
Note that for this case depending on the endianness on the bus, we may
see a change of behaviour.
Signed-off-by: NDetlev Zundel <dzu@denx.de>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Add support for compiling the host tools in the tools directory using
the MinGW toolchain.  This produces executables which can be used on
standard Windows computers without requiring cygwin.

One must specify the MinGW compiler and strip utilities as if they
were the host toolchain in order to build win32 executables, eg:

make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Create a few generic build rules to replace the current method which has
1 build target for each file
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Files in the SRCS variable have their dependencies automatically
generated so remove duplicate explicit dependencies
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Add the libfdt files to the SRCS variable so that they have their
dependencies automatically generated
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

This change makes the process of symlinking libfdt_internal.h
unnecessary
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

crc32.c uses the zlib.h header in include/u-boot/zlib.h.  The symlink
was previously necessary to give U-Boot's version of zlib.h precedence
over the host computer's version of zlib.h.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

This change makes the process of symlinking mkimage.h and fdt_host.h
unnecessary
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Also conditionally add ncb.o to OBJ_FILES list
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Split variable declarations into multiple lines and use the standard
VAR-y convention.  Also move object and binary variable declarations to
after config.mk has been included to allow for these lists to utilize
the CONFIG_XXX variables.

These changes lay the groundwork for conditional compilation of files
in the tools directory.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

The values of HOSTARCH and HOSTOS which are exported from the top-level
Makefile should be used
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Replace random()/srandom() use with rand()/srand() to support
compilation with the mingw toolchain.  The rand()/srand() functions are
generally more common and are functionally equivalent to the original
random()/srandom() calls.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

The original code provided an incomplete set of typedefs for WIN32
compiles and replicated the standard typedefs that are already
provided by stdint.h
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>