- 24 10月, 2016 14 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_ENV_OVERWRITE Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CONSOLE_SCROLL_LINES Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CONSOLE_EXTRA_INFO Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_VIDEO_SW_CURSOR Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> [trini: Re-convert, find all the cases where this is off] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_VGA_AS_SINGLE_DEVICE Once we migrate to driver model for video, we should be able to drop this option. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_BG_COL CONFIG_SYS_CONSOLE_FG_COL Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_VIDEO_CT69000 Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CFB_CONSOLE_ANSI Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CFB_CONSOLE Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV CONFIG_CONSOLE_MUX Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Re-order, re-migrate] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_LCD Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NJagan Teki <jteki@openedev.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_VIDEO Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NJagan Teki <jteki@openedev.com>
-
由 Simon Glass 提交于
Move these option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagan Teki <jteki@openedev.com>
-
由 Simon Glass 提交于
Move these option to Kconfig and tidy up existing uses. The Power PC boards don't have a suitable common element: the common header files don't appear to line up with the Kconfig files as far as I can tell. This results in a lot of defconfig changes. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagan Teki <jteki@openedev.com> [trini: Re-migrate, update common/console.c logic] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 18 10月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 15 10月, 2016 3 次提交
-
-
由 Heiko Schocher 提交于
Move FDT_FIXUP_PARTITIONS to Kconfig and cleanup existing uses. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Move SYS_OS_BASE to Kconfig and cleanup existing uses. Signed-off-by: NHeiko Schocher <hs@denx.de> [trini: Also migrate a4m2k] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
Move SPL_OS_BOOT to Kconfig and cleanup existing uses. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 12 10月, 2016 9 次提交
-
-
由 Lokesh Vutla 提交于
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Bin Meng 提交于
This converts coreboot to use DM framebuffer driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
At present only chromebook boards are converted to DM video. Other x86 boards are still using the legacy cfb_console driver. This switches to use DM version drivers. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Keerthy 提交于
Enable CMD_REG option. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
Enable palmas PMIC config options. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
Enable palmas PMIC config options. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
These two options go together and it is best to do the conversion in one step. So enable DM_MMC_OPS by default if DM_MMC is enabled. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
To speed up conversion to CONFIG_BLK, enable it by default when DM_MMC is enabled. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 11 10月, 2016 1 次提交
-
-
由 Simon Glass 提交于
Update the configuration to use the new driver. Drop the existing plumbing code and unused header files. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 10 10月, 2016 1 次提交
-
-
由 Josh Marshall 提交于
We have a number of OlinuXino Lime2 boards (both NAND and eMMC versions) which were experiencing sporadic hangs. After testing with some heavy benchmarking and help from the Armbian forum, it was pinned down as the DRAM settings for the board. The default is 480MHz, but this is unstable, and even the build instructions from the vendor Olimex themselves say to set the DRAM clock to 384. See line 96 at: https://github.com/OLIMEX/OLINUXINO/blob/master/SOFTWARE/A20/A20-build-3.4.103-release-2/BUILD_DESCRIPTION_A20_Olimex_kernel_3.4.103%2B_Jessie_rel_2.txtReviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
- 09 10月, 2016 1 次提交
-
-
由 Walter Schweizer 提交于
Synology DS109 is based on MV88F6281. The code is based on Dreamplug code with modificatons from Synologys open source repository. Signed-off-by: NWalter Schweizer <swwa@users.sourceforge.net> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 08 10月, 2016 3 次提交
-
-
由 Mugunthan V N 提交于
Add DTS support for dra72 evm Rev C which has the following changes * Two ethernet ports now instead of the single one in rev B. * DP83867 ethernet phy instead of DP838865. Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Sriram Dash 提交于
Enables driver model flag CONFIG_DM_USB for LS2080A platform defconfigs. Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Sriram Dash 提交于
Add device tree support for LS2080ARDB nand boot. Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 07 10月, 2016 7 次提交
-
-
由 Sudeep Holla 提交于
Commit f225d39d ("vexpress: Check TC2 firmware support before defaulting to nonsec booting") added support to check if the firmware on TC2 is configured appropriately before booting in nonsec/hyp mode. However when booting in non-secure/hyp mode, CCI control must be done in secure firmware and can't be done in non-secure/hyp mode. In order to ensure that, this patch disables the cci slave port inteface so that it is not accessed at all. Cc: Jon Medhurst <tixy@linaro.org> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NSudeep Holla <sudeep.holla@arm.com> Acked-by: NJon Medhurst <tixy@linaro.org> Tested-by: NJon Medhurst <tixy@linaro.org>
-
由 Semen Protsenko 提交于
Now that fastboot options are available in Kconfig, we can migrate them from DRA7 header to corresponding DRA7 defconfigs. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Stefan Agner 提交于
Enable device tree configuration and specify default device tree for Toradex Colibri iMX7. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Keerthy 提交于
Enable Linear Physical Address Extension mode which is a prerequisite for hypervisor mode. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
Enable Linear Physical Address Extension mode which is a prerequisite for hypervisor mode. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 York Sun 提交于
Move DDR3, DDR4 and related config options to Kconfig and clean up existing uses. Signed-off-by: NYork Sun <york.sun@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 York Sun 提交于
Move DDR3, DDR4 and realted options to Kconfig and clean up existing uses. Signed-off-by: NYork Sun <york.sun@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-