- 12 9月, 2015 2 次提交
-
-
由 Masahiro Yamada 提交于
It's easier to Cc him on ARC-releated patches. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
-
- 11 9月, 2015 14 次提交
-
-
由 Heiko Schocher 提交于
[root@pollux dfu-util]# ./src/dfu-util -l dfu-util 0.8 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2014 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to dfu-util@lists.gnumonks.org Found DFU: [0908:02d2] ver=0212, devnum=119, cfg=1, intf=0, alt=0, name="Linux", serial="UNKNOWN" [root@pollux dfu-util]# Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NLukasz Majewski <l.majewski@samsung.com>
-
由 Heiko Schocher 提交于
add U-Boot specific changes to the at91_udc linux driver, so it works with U-Boot. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
port at91_udc driver from linux: original commit Message: commit c94e289f195e0e13cf34d27f9338d28221a85751 Author: Arnd Bergmann <arnd@arndb.de> Date: Sat Apr 11 00:14:21 2015 +0200 usb: gadget: remove incorrect __init/__exit annotations A recent change introduced a link error for the composite printer gadget driver: `printer_unbind' referenced in section `.ref.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o Evidently the unbind function should not be marked __exit here, because it is called through a callback pointer that is not necessarily discarded, __composite_unbind() is indeed called from the error path of composite_bind(), which can never work for a built-in driver. Looking at the surrounding code, I found the same problem in all other composite gadget drivers in both the bind and unbind functions, as well as the udc platform driver 'remove' functions. Those will break if anyone uses the 'unbind' sysfs attribute to detach a device from a built-in driver. This patch removes the incorrect annotations from all the gadget drivers. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Bo Shen 提交于
Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into the console and hitting enter afterwards, causes a hang in the system because CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error message: "Unknown command '' - try 'help'". Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve this problem. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NJosh Wu <josh.wu@atmel.com>
-
由 Daniel Gorsulowski 提交于
Signed-off-by: NDaniel Gorsulowski <daniel.gorsulowski@esd.eu> Reviewed-by: NSimon Glass <sjg@chromium.org> [fix corrupt line wraps in patch] Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
taurus changes: - rename at91_spl_board_init to spl_board_init fixes problems with recovery button and nand erase sector 0 - adapt CONFIG_SPL_MAX_SIZE and CONFIG_SPL_BSS_MAX_SIZE - add CONFIG_AT91_HW_WDT_TIMEOUT 15 - CONFIG_SF_DEFAULT_MODE SPI_MODE_3 not mode 0 Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add extensions for the axm board: - power on LED on power up - press both recovery buttons on power up to enter recovery mode - detect 64 MiB and 128 MiB ramsize - PHY rest at reboot because of ATMEL bug - use siemens update concept - add axm default environment - set CONFIG_SPL_MAX_SIZE to 15k Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add support for DFU on the corvus board. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
- rename at91_spl_board_init into spl_board_init - use SZ_1X defines for sizes Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Stefan Roese 提交于
This patch adds support for NAND chips with 4KiB page size and 24/1024 ECC strength. Like the Micron MT29F32G08CBACAWP which is used on the ICnova-A20 SoM. Signed-off-by: NStefan Roese <sr@denx.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Siarhei Siamashka 提交于
Currently some uninitialized padding bytes are written to the output file, as can be confirmed with valgrind: $ valgrind tools/mksunxiboot spl/u-boot-spl.bin spl/sunxi-spl.bin ==5581== Syscall param write(buf) points to uninitialised byte(s) ==5581== at 0x4F0F940: __write_nocancel (in /lib64/libc-2.20.so) ==5581== by 0x400839: main (in /tmp/u-boot/tools/mksunxiboot) ==5581== Address 0xffeff5d3c is on thread 1's stack ==5581== in frame #1, created by main (???) This patch fixes the problem by clearing the whole structure instead of just a portion of it. Signed-off-by: NSiarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Siarhei Siamashka 提交于
The Forfun Q88DB tablet was unbootable since commit b6006baf ("sunxi: Move all boards to the driver-model"). Appears that this is caused by the wrong serial console setup in the SPL. The serial console should use PG3/PG4 pins according to the FEX file. Signed-off-by: NSiarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Jelle van der Waa 提交于
The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. The dts file changes are identical to the changes submitted to the upstream kernel. Signed-off-by: NJelle van der Waa <jelle@vdwaa.nl> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Hans de Goede 提交于
This commits adds a generic support for q8 formfactor a13 based tablets. These tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used. The wifi is USB based, and thus not listed in devicetree. ATM the kernel does not support the touchscreen / accelerometer on these devices. In the future we may need multiple configs with different CONFIG_DEFAULT_DEVICE_TREE settings, this depends on how we solve the hw differences on the kernel side. For now this will suffice. The dts files are identical to the dts files submitted to the upstream kernel for these tablets. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
- 10 9月, 2015 3 次提交
-
-
由 Hans de Goede 提交于
The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007. This patch has been tested on both rev2 and rev5 of this board / these tablets. These tablets feature the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet. These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen. Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
- 09 9月, 2015 21 次提交
-
-
由 Bin Meng 提交于
When building dm version of designware eth driver on a platform with 64-bit phys_addr_t, it reports the following warnings: drivers/net/designware.c: In function 'designware_eth_probe': drivers/net/designware.c:599:2: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat] drivers/net/designware.c:600:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/net/designware.c:601:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] This commit fixes the build warnings. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move to driver model for USB on Intel Galileo. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
USB PHY needs to be properly initialized per Quark firmware writer guide, otherwise the EHCI controller on Quark SoC won't work. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move to driver model pci for Intel quark/galileo. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Quark SoC holds the PCIe controller in reset following a power on. U-Boot needs to release the PCIe controller from reset. The PCIe controller (D23:F0/F1) will not be visible in PCI configuration space and any access to its PCI configuration registers will cause system hang while it is held in reset. Enable PCIe controller per Quark firmware writer guide. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
If we convert to use driver model pci on quark, we will encounter some chicken and egg problems like below: - To enable PCIe root ports, we need program some registers on the message bus via pci bus. With driver model, the first time to access pci bus, the pci enumeration process will be triggered. But without first enabling PCIe root ports, pci enumeration just hangs when scanning PCIe root ports. - Similar situation happens when trying to access GPIO from the PCIe enabling codes, as GPIO requires its block base address to be assigned via a pci configuration register in the bridge. To avoid such dilemma, replace all pci calls in the quark codes to use the local version which does not go through driver model. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Intel Quark SoC has a low end x86 processor with only 400MHz frequency. Currently it takes about 15 seconds for U-Boot to boot to shell and the most time consuming part is with MRC, which is about 12 seconds. MRC programs lots of registers on the SoC internal message bus indirectly accessed via pci bus. To speed up the boot, create an optimized version of pci config read/write dword routines which directly operate on PCI I/O ports. These two routines are inlined to provide better performance too. Now it only takes about 3 seconds to finish MRC, which is really fast (4 times faster than before). Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present, until a PCI bus is probed, it cannot be found by its sequence number unless it has an alias. This is the same with any device. However with PCI this is more annoying than usual, since bus 0 is always the same device. Add a function that tries a little harder to locate PCI bus 0. This means that PCI enumeration will happen automatically on the first access. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
At present buildman can compare configurations between commits but the feature is less useful than it could be. There is no summary by architecture and changes are not reported on a per-board basis. Correct these deficiencies so that it is possible to see exactly what is changing for any number of boards. Note that 'buildman -b <branch> -C' is recommended for any build where you will be comparing configuration. Without -C the correct configuration will not be reported since changes will often not be picked up. Reviewed-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
This reverts commit 19b4a336. Since that commit, patman generates useless patches for file removal; "git format -D" prints only the header but not the diff when deleting files, and "git am" always refuses such patches. The following is the quotation from "man git-format-patch": -D, --irreversible-delete Omit the preimage for deletes, i.e. print only the header but not the diff between the preimage and /dev/null. The resulting patch is not meant to be applied with patch nor git apply; this is solely for people who want to just concentrate on reviewing the text after the change. In addition, the output obviously lack enough information to apply such a patch in reverse, even manually, hence the name of the option. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move to driver model for USB and ETH on Intel Bayley Bay. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move to driver model for RTC, USB and ETH on coreboot. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Now that we have converted the pch_gbe driver to driver moel, enable it on Intel Crown Bay board. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Add Kconfig option in preparation for moving board to use Kconfig. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
This commit converts pch_gbe ethernet driver to driver model. Since this driver is only used by Intel Crown Bay board, the conversion does not keep the non-dm version. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Since E1000 driver has been converted to driver model, enable it on Intel Crown Bay. But the Intel Topcliff GbE driver has not been converted to driver model yet, disable it for now. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Bin Meng 提交于
Move to driver model for USB on Intel Crown Bay. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
When given a device name string, we should test to see if it is really an alias like "eth#". Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Bin Meng 提交于
Add one more ethernet device node in the sandbox test device tree, with name 'sbe5'. This is to support a new test case for testing network device rotation. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Bin Meng 提交于
With driver model, board_eth_init() or cpu_eth_init() is not a must. Thus we don't need print a misleading "Net Initialization Skipped". Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Bin Meng 提交于
Commit 620776d7 "tftp: adjust settings to be suitable for 100Mbit ethernet" causes the following error message when trying to load a file using 'tftp' command via a tftp server. TFTP error: 'Unsupported option(s) requested' (8) This is due to with commit 620776d7 changes, the tftp option 'timeout' value is now set to zero which is an invalid value as per RFC2349 [1]. Valid values range between "1" and "255" seconds, inclusive. With some tftp servers that strictly implement the RFC requirement, it reports such an error message. Revert commit 620776d7 for RFC compliance. [1] https://www.ietf.org/rfc/rfc2349.txtSigned-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-