- 19 6月, 2019 2 次提交
-
-
由 Ran Wang 提交于
Enable workaround for USB erratum A-008997. Here PCSTXSWINGFULL registers has been moved to DSCR as compared to other Layerscape SoCs where it was in SCFG. Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Pankaj Bansal 提交于
when compiling dts file using DTC_FLAG='-@', the device tree compiler reports these warnings: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' Fixed the node aliases to silence these warnings. Signed-off-by: NPankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
- 16 6月, 2019 4 次提交
-
-
git://git.denx.de/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for v2019.07-rc5 (2) This pull request provides bug fixes for the UEFI sub-system. The most relevant one concerns the allocation of memory at address 0. It is needed for booting Linux on several boards via bootefi, e.g. the Asus TinkerBoard. An undefined reference bug in disk/part.c related to a division is resolved.
-
-
-
由 Tom Rini 提交于
- Kconfig migrations of SPL_BOOT_xxx, SYS_LDSCRIPT, IP_DEFRAG, TFTP_BLOCKSIZE. - Typo fixes, other minor corrections.
-
- 15 6月, 2019 21 次提交
-
-
由 Bartosz Golaszewski 提交于
The setexpr shell command calls cmd_get_data_size() which is only built when CMD_DATA_SIZE is defined. We need to define CMD_DATA_SIZE if CONFIG_CMD_SETEXPR is selected or the build will fail if no other command selecting this option is enabled. Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Tom Rini 提交于
In order to migrate this symbol to Kconfig introduce a new symbol to guard it, CONFIG_SYS_CUSTOM_LDSCRIPT. When that is set we can then provide the exact final location o the script. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
A number of boards set CONFIG_SYS_LDSCRIPT and then end up using one of the default searched LDSCRIPT paths. Remove these customizations. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Simon Goldschmidt 提交于
This tool has just been added but it seems I forgot to add it to the ignore list. So to prevent the built binary being marked as unversioned, add it to the ignore list. Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Marek Vasut 提交于
Convert CONFIG_TFTP_BLOCKSIZE to Kconfig, update defconfigs, headers and whitelist. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
-
由 Marek Vasut 提交于
Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Reported-by: NChristian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
-
由 Heinrich Schuchardt 提交于
The SetAttribute() service and the Reset() service of the simple text output protocol must update the attribute value in the mode information. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Correct the check of the mode number in SetMode() service of the simple text output protocol. Clear the screen in SetMode(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If the GetTime() runtime service is not supported, EFI_UNSUPPORTED has to be returned. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 AKASHI Takahiro 提交于
This variable is defined in UEFI specification 2.8, section 8.1. Its value should be updated whenever we add any usable runtime services function. Currently we only support SetVirtualAddress() for all systems and ResetSystem() for some. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Return EFI_INVALID_PARAMETER if the variable name has zero length or the variable has runtime access but not boottime access. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
When compiling with FTRACE=1 an error ld.bfd: disk/built-in.o: in function `lba512_muldiv': disk/part.c:114: undefined reference to `__udivmoddi4 occurred. Use '>> 11' instead of '/ 2048' to avoid the division. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
The UEFI specification does not specify if the characters that have to be replaced by underscore in function StrToFat() of the Unicode collation protocol are those forbidden in FAT long names or those in FAT short names. EDK2 and UEFI SCT assume it is those forbidden in FAT 8.3 short names. Adjust the list of forbidden characters. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
The MetaiMatch() service of the UnicodeCollationProtocol2 must be case insensitive. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
It must be possible to allocate memory at address 0 with AllocatePages(). Move a NULL pointer check. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Always use EFI_EXIT() to return from the function. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If an image already has been started, return EFI_INVALID_PARAMETER when StartImage() is called for the same handle again. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If the file path does not relate to an existing file, LoadImage() must return EFI_NOT_FOUND. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If both SourceBuffer and DevicePath are NULL, LoadImage() must return EFI_INVALID_PARAMETER. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 14 6月, 2019 9 次提交
-
-
由 Ramon Fried 提交于
Change my email address, too many mails gets to my private mail, created specific email account just for developmement. Signed-off-by: NRamon Fried <ramon.fried@gmail.com>
-
由 Marek Vasut 提交于
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
-
由 Marek Vasut 提交于
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
-
由 Marek Vasut 提交于
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
-
由 Marek Vasut 提交于
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
-
由 Marek Vasut 提交于
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
-
由 Marek Vasut 提交于
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
-
由 Simon Goldschmidt 提交于
This provides an SPL_SIZE_LIMIT that makes the build check that the SPL binary loaded from flash fits into the SRAM (64 KiB) and leaves enough room for global data, heap and stack (512 bytes assumed stack usage). Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Ley Foon Tan 提交于
Enable i2c1 in Stratix 10 devkit. SOCFPGA_STRATIX10 # i2c bus Bus 0: i2c@ffc02900 SOCFPGA_STRATIX10 # i2c dev 0 Setting bus to 0 SOCFPGA_STRATIX10 # i2c probe Valid chip addresses: 14 4C 51 68 74 Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
- 13 6月, 2019 1 次提交
-
-
git://git.denx.de/u-boot-amlogic由 Tom Rini 提交于
- pinctrl: meson-gx: fix GPIO_TEST_N and GPIOCLK_ groups - pinctrl: meson-gxbb: add hdmi related pins to fix HDMI on GXBB - pinctrl: meson: add support for getting pinmux status - pinctrl: meson-g12a: add support for drive-strength-microamp property
-
- 12 6月, 2019 3 次提交
-
-
git://git.denx.de/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for v2019.07-rc5 This pull request provides fixes for event services.
-
由 Maxime Jourdan 提交于
The GXBB pinctrl is missing pins related to HDMI, namely hot plug detection (hpd) and I2C (sda + scl). This fixes HDMI support for GXBB in u-boot. Reported-by: NMohammad Rasim <mohammad.rasim96@gmail.com> Signed-off-by: NMaxime Jourdan <mjourdan@baylibre.com> Acked-by: NNeil Armstrong <narmstrong@baylibre.com> Tested-by: NMohammad Rasim <mohammad.rasim96@gmail.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Guillaume La Roque 提交于
add drive-strength bank regiter and bit value for G12A SoC Signed-off-by: NGuillaume La Roque <glaroque@baylibre.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-