Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

Move the main symbol for Freescale Fman Ethernet controller option to
Kconfig.  Also migrate the CONFIG_SYS_QE_FMAN_FW_IN_xxx macros and
rename the SPIFLASH one to follow the same format as all of the others.
To do this fully we need to migrate CONFIG_QC, do so.
Signed-off-by: NTom Rini <trini@konsulko.com>

Enable CONFIG_USE_PREBOOT on for the gardena mt7688 platforms, so that
this feature can be used here.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

This patch enables the "wdt" command, which is quite useful for watchdog
testing.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

This patch adds CONFIG_DM_SPI for all m68k boards using
the cf_spi.c driver (DSPI module).
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

Enable DT usage for all m68k boards. To provide a
working single binary, the dts has been kept as embedded.
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

This patch adds basic dts files for all the m68k boards.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
[trini: Add CONFIG_TARGET_M5329EVB dtbs and update M5329EVB defconfigs]
Signed-off-by: NTom Rini <trini@konsulko.com>

Enable eSDHC, SATA and USB DM for T2080QDS in uboot
Signed-off-by: NPeng Ma <peng.ma@nxp.com>
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NRajat Srivastava <rajat.srivastava@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NRajat Srivastava <rajat.srivastava@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: NRajat Srivastava <rajat.srivastava@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Enables CONFIG_SPI_FLASH
Signed-off-by: NChuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

LS1028AQDS Development System is a high-performance
computing, evaluation, and development platform that supports
LS1028A QorIQ Architecture processor.
Signed-off-by: NSudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: NRai Harninder <harninder.rai@nxp.com>
Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: NBhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: NTang yuantian <andy.tang@nxp.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

LS1028A is an ARMv8 implementation. LS1028ARDB is an evaluation
platform that supports the LS1028A family SoCs. This patch add basic
support of the platform.
Signed-off-by: NSudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: NRai Harninder <harninder.rai@nxp.com>
Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: NBhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: NTang Yuantian <andy.tang@nxp.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Enable the PCIe Gen4 controller driver and e1000 for LX2160ARDB
and LX2160AQDS boards.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Update mtd-id for QSPI nor due to change introduced in mtd/spi in
linux 5.0. commit 84d043185dbe
  ("spi: Add a driver for the Freescale/NXP QuadSPI controller")

This modification is only for linux kernel version >= 5.0. To use
bootargs for kernel < 5.0, use the following bootargs
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0
earlycon=uart8250,mmio,0x21c0500
mtdparts=1550000.quadspi:2m(uboot),14m(free)"

CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:2m(uboot),14m(free)"
Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

The gdsys gazerbeam board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.

On board peripherals include:
- 2x 10/100 Mbit/s Ethernet (optional)
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Migrate the CONFIG_LCRR_* settings to Kconfig.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Migrate the SPCR setting to Kconfig.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Migrate the arbiter configuration to Kconfig.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Migrate the system IO configuration setting to Kconfig.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Migrate CONFIG_SYS_IMMR to Kconfig for MPC83xx.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Mirate the HID configuration settings to Kconfig.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Migrate the BR/OR settings to Kconfig. These must be known at compile
time, so cannot be configured via DT.

Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

The LBLAW_* values determine the window configuration of the memory
controller. Hence, they must be known at compile time, and cannot be
implemented in the DT mechanism.

Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

The BATs (block address translation registers) determine the initial
memory window mappings. Hence, they must be known at compile time and
cannot be implemented in the DT mechanism.

Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Migrate the CONFIG_HIGH_BATS variable to Kconfig.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

The HRCW (hardware reset configuration word) is a constant that must be
hard-coded into the boot loader image. So, it must be available at
compile time, and cannot be migrated to the DT mechanism, but has to be
kept in Kconfig.

Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the
system clock. To migrate the architecture, we can replace
CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ.

To do this
* replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ
* set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all
  MPC83xx config files
Signed-off-by: NMario Six <mario.six@gdsys.cc>

The MPC83xx include files contain some settings of the PCI subsystem.

Migrate these to Kconfig until a proper DM PCI driver exists.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

Use the proper CONFIG_TARGET_MPC8349ITX Kconfig option to replace the
CONFIG_MPC8349ITX ad-hoc config option.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

The MPC8349EMDS config file contains config options to enable SDRAM
support. To keep this ability after the Kconfig migration, create a new
MPC8349EMDS_SDRAM board that enables the SDRAM support and remove the
SDRAM support from the original board.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

NanoPi M1 plus have a 10/100/1000M ethernet with external phy.
Phy power is controlled by PD6.
Add the required configuration for it.
Signed-off-by: NEmmanuel Vadot <manu@freebsd.org>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

SPL_TEXT_BASE was moved into Kconfig, which previously part of
include/configs before this teres_i support gets merged.

Fix it by explicitly define in defconfig like other boards does.
Signed-off-by: NJonas Smedegaard <dr@jones.dk>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>

SPL_TEXT_BASE has been moved to Kconfig with commit:
f89d6133 configs: move CONFIG_SPL_TEXT_BASE to Kconfig

But Beelink GS1 config file has been introduced in the
same time without this modification.

Fix this by settings the CONFIG_SPL_TEXT_BASE
Suggested-by: NJonas Smedegaard <dr@jones.dk>
Signed-off-by: NClément Péron <peron.clem@gmail.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

vme8349.h contains two separate boards: The vme8349 itself, and the
caddy2 board. The caddy2 board is chosen by setting certain config
variables. Create a proper config file for the caddy2 board to make
Kconfig migration easier.

Furthermore, simplify the vme8349 and caddy2 configs by keeping only the
options necessary for each board.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

MPC8313ERDB has the option of either enabling NOR or NAND boot in its
config file (by commenting out certain #ifdefs). To keep this ability
after migrating options to Kconfig, we introduce two MPC8313ERDB
configs: one for NOR, and one for NAND.
Signed-off-by: NMario Six <mario.six@gdsys.cc>

The kmeter1, and kmcoge5ne boards also build from the same config
file with #ifdef logic.

Create a separate include config for each board with the #ifdef logic
resolved as needed.
Signed-off-by: NMario Six <mario.six@gdsys.cc>