- 03 3月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 01 11月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
All 4xx board config files don't need the cache definitions anymore. These are now defined in common headers. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 31 7月, 2007 1 次提交
-
-
由 Eugene OBrien 提交于
Changed storage type of cfg_simulate_spd_eeprom to const Changed storage type of gpio_tab to stack storage (Cannot access global data declarations in .bss until afer code relocation) Improved SDRAM tests to catch problems where data is not uniquely addressable (e.g. incorrectly programmed SDRAM row or columns) Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules Fixed AM29LV320DT (OpCode Flash) sector map Signed-off-by: NEugene OBrien <eugene.obrien@advantechamt.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 10 7月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 05 7月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 25 6月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 23 6月, 2007 1 次提交
-
-
由 Wolfgang Denk 提交于
-
- 15 6月, 2007 1 次提交
-
-
由 Grzegorz Bernacki 提交于
- Introduced dedicated switches for building 440 and 405 images required for 440-specific machine instructions like 'rfmci' etc. - Exception vectors moved to the proper location (_start moved away from the critical exception handler space, which it occupied) - CriticalInput now serviced (with default handler) - MachineCheck properly serviced (added a dedicated handler and return subroutine) - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, unhandled and those not relevant for 4xx were eliminated) - Eliminated Linux leftovers, removed dead code Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com> Signed-off-by: NRafal Jaworowski <raj@semihalf.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 01 6月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds NAND booting support for the AMCC Bamboo eval board. Since the NAND-SPL boot image is limited to 4kbytes, this version only supports the onboard 64MBytes of DDR. The DIMM modules can't be supported, since the setup code for I2C DIMM autodetection and configuration is too big for this NAND bootloader. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 29 4月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 07 2月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
Some boards that can have more than 768MBytes of SDRAM need to set "initrd_high", so that the initrd can be accessed by the Linux kernel. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 07 9月, 2006 1 次提交
-
-
由 Stefan Roese 提交于
- Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board, please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image doesn't support environment in NAND for now. This will be added in a short while. Patch by Stefan Roese, 07 Sep 2006
-
- 07 8月, 2006 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 07 Aug 2006
-
- 27 7月, 2006 1 次提交
-
-
由 Stefan Roese 提交于
Please see doc/README.bamboo for details. Patch by Stefan Roese, 27 Jul 2006
-
- 06 3月, 2006 1 次提交
-
-
由 Bartlomiej Sieka 提交于
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is implemented for these boards.
-
- 28 11月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
On PPC44x platforms, the startup message generated in "cpu.c" only comprised the ppc type and revision but not additional informations like speed etc. Those speed infos where printed in the board specific code. This new implementation now prints all CPU infos in the common cpu specific code. No board specific code is needed anymore and therefore removed from all current 44x implementations. Patch by Stefan Roese, 27 Nov 2005
-
- 21 11月, 2005 1 次提交
-
-
由 Wolfgang Denk 提交于
which makes the environment compatible with the hush shell. WARNING: Support for the old '$(...)' syntax will be discontinued in a later version.
-
- 15 11月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 15 Nov 2005
-
- 20 10月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 20 Oct 2005
-
- 14 10月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 14 Oct 2005
-
- 23 9月, 2005 1 次提交
-
-
由 Wolfgang Denk 提交于
-
- 17 8月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
now handling all 4xx cpu's. Patch by Stefan Roese, 16 Aug 2005
-
- 11 8月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 11 Aug 2005
-
- 08 8月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 08 Aug 2005
-
- 04 8月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 04 Aug 2005
-
- 02 8月, 2005 1 次提交
-
-
由 Wolfgang Denk 提交于
-
- 01 8月, 2005 2 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 01 Aug 2005
-
由 Stefan Roese 提交于
Patch by Steven Blakeslee, 27 Jul 2005
-