- 05 9月, 2017 1 次提交
-
-
由 Wadim Egorov 提交于
Read SoM information from EEPROM and set ethaddr in late init. Signed-off-by: NWadim Egorov <w.egorov@phytec.de> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 04 9月, 2017 22 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Clemens Gruber 提交于
When enabling CONFIG_CMD_BLOB and/or CONFIG_CMD_DEKBLOB, the build fails with a linker error: ... LD u-boot arch/arm/mach-imx/built-in.o: In function `blob_encap_dek': /home/clemens/dev/u-boot/arch/arm/mach-imx/cmd_dek.c:46: undefined reference to `blob_dek' This is due to an error in the Makefile, resulting in obj-yy/obj-yn/.. and fsl_blob.o is therefore not linked. Fix it by splitting it up into two obj-y lines. Signed-off-by: NClemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Lukasz Majewski 提交于
Signed-off-by: NLukasz Majewski <lukma@denx.de>
-
由 Bin Meng 提交于
This should not be printed by default. Prefix it with $(Q). Fixes ee95d10b: ("fdt: Build the new python libfdt module") Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
Since commit 3809e302 "Makefile: honor PYTHON configuration properly", the build commands of libfdt are printed while previously were not. This adds the missing '--quiet' back. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Derald D. Woods 提交于
- Pass MTDPARTS kernel arguments to kernel - Use Kconfig CONFIG_NAND instead of CONFIG_SYS_EXTRA_OPTIONS="NAND" - Call 'usb_stop' on kernel start - Update Falcon mode setup to match other OMAP3 boards - Use "uEnv.txt" as boot script instead of "boot.scr"
-
由 Bin Meng 提交于
This is not used in U-Boot. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
This is actually not used. Drop it. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
This is not referenced anywhere. Drop it. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
Execution cannot reach this statement: "nr_io_queues = result;" Reported-by: Coverity (CID: 166731) Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Bin Meng 提交于
"lbas" with type "u16" (16 bits, unsigned) is promoted in "lbas << ns->lba_shift" to type "int" (32 bits, signed), then sign-extended to type "unsigned long long" (64 bits, unsigned). If "lbas << ns->lba_shift" is greater than 0x7FFFFFFF, the upper bits of the result will all be 1. Fix it by casting "lbas" to "u32". Reported-by: Coverity (CID: 166730) Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Bin Meng 提交于
memset() was given a sizeof(NVME_Q_NUM * sizeof(struct nvme_queue *) to clear, which is wrong. Reported-by: Coverity (CID: 166729) Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Heinrich Schuchardt 提交于
%s/Desriptor/Descriptor/g Fix lines over 80 characters with said typo. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Lukasz Majewski 提交于
According to fsync specification [1] some special files (e.g., a pipe, FIFO, or socket) don't support synchronization and return either EROFS or EINVAL. On the linux side the sys_fsync -> do_fsync() checks if the requested file has f_op->fsync defined. If not it returns EINVAL [2]. This commit prevents writing error messages for files (devices), which do not support fsync(). [1] - http://man7.org/linux/man-pages/man2/fsync.2.html [2] - http://elixir.free-electrons.com/linux/v4.13-rc6/source/fs/sync.c#L183Signed-off-by: NLukasz Majewski <lukma@denx.de> Acked-by: NMichael Heimpold <mhei@heimpold.de>
-
由 Jonathan Gray 提交于
Commit 4ecc9883 assumes fls is in libc if __BSD_VISIBLE is defined. This appears to only be true on FreeBSD and DragonFlyBSD. OpenBSD defines __BSD_VISIBLE and does not have fls in strings.h/libc. Switch the test for __BSD_VISIBLE to one for __DragonFly__ and __FreeBSD__ to unbreak the build on OpenBSD. Signed-off-by: NJonathan Gray <jsg@jsg.id.au>
-
由 Thomas Petazzoni 提交于
This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be equal to CONFIG_SYS_CBSIZE in numerous configuration files. We remove such definitions in two situations: - CONFIG_SYS_CBSIZE is otherwise not defined in the board configuration file, which means the default value of CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is larger. - CONFIG_SYS_CBSIZE is defined in the board configuration file, but to a value equal or less than 512. In this case, the default value of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it is equal or larger. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
CONFIG_SYS_BARGSIZE is already defined to 512 in common/image.c when not defined. Therefore, there is no point in having board configuration files define it to 512. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
Now that include/config_fallbacks.h define a sane fallback for CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all configurations that were using the default value. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
CONFIG_SYS_MAXARGS contains the maximum number of arguments accepted by U-Boot commands. Since the vast majority of the platforms define it to 16, it makes sense to have a default definition to 16, which will allow to remove this definition from a significant number of platforms. It will allow to remove the default definition from 216 platform .h files, leaving only 56 platforms with non-default values (15, 24, 32, 48, 64, 96, 128 or 256). Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
Now that the fallback value of CONFIG_SYS_PBSIZE in include/config_fallbacks.h has been adjusted, remove its definition from a large number of board configuration files. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
Most of the platforms are using CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16 as their value for CONFIG_SYS_PBSIZE, so let's adopt this for the fallback value of CONFIG_SYS_PBSIZE. This will allow us to drop an explicit definition of CONFIG_SYS_PBSIZE from a large number of platforms. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
Now that include/config_fallbacks.h define a sane fallback for CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all configurations that were using the default value. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com> [trini: Drop <config.h> from stih410-b2260.h] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 03 9月, 2017 7 次提交
-
-
由 Thomas Petazzoni 提交于
CONFIG_SYS_CBSIZE contains the buffer size for input for the console. The vast majority of platforms define them to some reasonable value (256, 512 or 1024 bytes), and it is quite annoying to repeat this definition for all platforms while it isn't really HW-related. Therefore, let's provide a sane fallback value in config_fallbacks.h, so that platforms can rely on it instead of having to explicitly define it. We use 1024 when KGDB is enabled, and 256 otherwise, which is what the majority of the platforms are doing. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Maxime Ripard 提交于
The current code checks that no partitions overlap with the GPT partition table using the offset of the first LBA usable for that partition. This works fine, unless you have a partition entry that is further away than it usually is and you want to create partitions in the gap between the GPT header and the GPT partition entries, for example to reflash a bootloader that needs to be set there. Rework the test to something a bit smarter that checks whether a partition would overlap with either the GPT header or the partition entries, no matter where it is on the disk. Partitions that do not have a start LBA specified will still start at the first LBA usable set in the GPT header, to avoid weird behaviours. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Maxime Ripard 提交于
The gpt_fill_pte will need to access the device block size. Let's pass the device descriptor as an argument. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Maxime Ripard 提交于
The start variable is only used inside a loop, and is never affected inside it, so it's a purely local variable. In the same way the partition size is accessed several times, so we can store it in a variable. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Maxime Ripard 提交于
Both the config option and the DT options specify the offset to set the GPT at in bytes, yet the code treats those values as block numbers. Fix that. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
-
由 Adam Ford 提交于
Add the following options to drivers/misc/Kconfig: SYS_I2C_EEPROM_ADDR SYS_I2C_EEPROM_BUS SYS_EEPROM_SIZE SYS_EEPROM_PAGE_WRITE_BITS SYS_EEPROM_PAGE_WRITE_DELAY_MS SYS_I2C_EEPROM_ADDR_LEN SYS_I2C_EEPROM_ADDR_OVERFLOW This does not migrate any boards, but provides a foundations for those who want/need these options Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Migrate uniphier] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 02 9月, 2017 10 次提交
-
-
由 Stefan Roese 提交于
Without ethernet cable plugged, "ip=dhcp" leads to a complete hangup in Linux booting and the system does not boot into userland at all. Since its not required to have an active network connection on these board, lets remove this statement from the default environment. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
It was noticed a few times, that the reboot from Linux (reboot command) is different from the reboot (reset command) under U-Boot. The U-Boot version does seem to reset the board more deeply (PCI cards etc) than the Linux reboot. This is actually caused by missing full reset bit in the reset register value in the ACPI FADT table. Reported-by: NStefan Roese <sr@denx.de> Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NStefan Roese <sr@denx.de>
-
由 Bin Meng 提交于
The atomic preop register can only be written when SPI settings are not locked, otherwise it's read-only. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Bin Meng 提交于
In ich_spi_xfer() when the driver presets control fields, control variable gets assigned twice. Apparently only the last assignment takes effect. Remove the other one. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Adam Ford 提交于
Manually enable SYS_NAND_U_BOOT_LOCATIONS. Set CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 and remove it from header Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_BCH Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SPL_OMAP3_ID_NAND Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SYS_I2C_BUS_MAX Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NHeiko Schocher <hs@denx.de> [trini: Fix AM43XX drop AM44XX] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
For consistency with other platforms and in preparation of Kconfig migration, let's change Several TI platforms that use I2C_BUS_MAX to CONFIG_SYS_I2C_BUS_MAX Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Tom Rini 提交于
- Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's not strictly part of fastboot. - Add some defaults for the fastboot buffer location and size - Migrate all options listed in cmd/fastboot/Kconfig - Cleanup the README Signed-off-by: NTom Rini <trini@konsulko.com>
-