Add support for the Colibri iMX6ULL module which comes with
on-board raw NAND.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>

Signed-off-by: NStefan Agner <stefan.agner@toradex.com>

The GPMI NAND IP seems to be the same as used in i.MX 6Quad. Use
the fsl,imx6q-gpmi-nand compatible string like Linux devices trees
are.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>

This macro allows to detect whether the boot ROM initialized USB
already (serial downloader). This is helpful to reliably detect
if the system has been recovered via USB serial downloader.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>

Support i.MX 6 NAND GPMI driver data from device tree.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>

If the bootcounter address is in a cached memory,
a flush of dcache must occur after updateing the bootcounter.

Issue found on i.MX6 where bootcounter is put into the internal
(cached) IRAM.
Signed-off-by: NStefano Babic <sbabic@denx.de>

Add Kconfig options SPL_ENV_* and TPL_ENV_* and simplify Makefile.
This allows SPL/TPL image has different environment setting from
full feature U-Boot.
Signed-off-by: NYork Sun <york.sun@nxp.com>

%s/remove/remote/
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Currently the fdtfile environment variable is set to
CONFIG_DEFAULT_DEVICE_TREE which is іnternally used as U-Boot devicetree
source. The OS can use a different filename and Kconfig gives us the
ability to select a default devicetree via CONFIG_DEFAULT_FDT_FILE.
This also gives user configuring U-Boot via menuconfig the behaviour
someone would expect.
Signed-off-by: NKlaus Goger <klaus.goger@theobroma-systems.com>
Tested-By: NVagrant Cascadian <vagrant@debian.org>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

On the veyron board the vcc33_sd regulator is used as vmmc-supply for
the SD card. This regulator is powered in the MMC core during power on
but its value is never actually set.

In the veyron platform the reset value for the LDO output is 1.8V while
the standard (min and max) value for this regulator defined in the DTS
is 3.3V. When the MMC core enable the regulator without setting its
value, the output is automatically set to 1.8V instead of 3.3V.

With this patch we preemptively set the value to 3.3V.
Signed-off-by: NCarlo Caione <carlo@endlessm.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

The GRF_SOC_CON0.grf_force_jtag bit is automatically set at boot and it
is preventing the SDMMC to work correctly. Disable the JTAG function on
the assumption that a working SD has higher priority over JTAG.
Signed-off-by: NCarlo Caione <carlo@endlessm.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Use regulators_enable_boot_on() to init all the regulators with
regulator-boot-on property.
Signed-off-by: NCarlo Caione <carlo@endlessm.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

The first dhcp command consistently fails with a timeout when
the lion-rk3368 board is connected to a Zyxel GS1100-24E
Gigabit Ethernet switch:

  ethernet@ff290000 Waiting for PHY auto negotiation to complete......... TIMEOUT !

Increasing PHY_ANEG_TIMEOUT from the default 4000 to 8000 makes the
first dhcp command work reliably.
Signed-off-by: NJakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Without the patch SPL (in case of an error) creates an output like:

	U-Boot SPL board initMissing DTB

The patch adds the missing line feed. So now we get:

	U-Boot SPL board init
	Missing DTB
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Change the description relating to CONFIG_SPL_ROCKCHIP_BACK_TO_BROM to
clarify that both RK3288 and RK3036 use

	CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

%s/rkflashtool/rkdeveloptool/

We are using rkdeveloptool not rkflashtool.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

The order distroboot searches for a boot.scr is fixed at compile time.
To make BIOS_DISABLE work as expected and boot from mmc1 instead of
mmc0 if enabled, we need to change the environment at runtime.
Especially as commit: 482cf223 ("rockchip: rk3399-puma: add boot-on
regulator to override BIOS_DISABLE") enables the eMMC in U-Boot even
if BIOS_DISABLE is active.
Signed-off-by: NKlaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This implements the new 'spl_perform_fixups' hook for RK3399-based
boards and injects the /chosen/u-boot,spl-boot-device with an ofpath
corresponding to the boot device used.

The intended usage is for the full U-Boot stage to evaluate this in
scripts and then adapt its boot-order when using distro-boot.
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: NKlaus Goger <klaus.goger@theobroma-systems.com>

To let the full U-Boot know where it was booted from (i.e. which of
the entries in /chosen/u-boot,spl-boot-order' contained a valid
image), we define (and document) /chosen/u-boot,spl-boot-device as the
property that could/should automatically be injected by SPL.

This commit only contains a documentation change, which documents the
new property and the intended usage.
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: NKlaus Goger <klaus.goger@theobroma-systems.com>

On some boards, we want to give the board/architecture-specific code a
chance to look at where the next image has been loaded from and
perform fixups before starting the next image.  This is of particular
importance, when we probe multiple devices for bootable payloads and
boot the first one found.

This change adds the following:
 - we record the boot_device used into the spl_image structure
 - we provide an extension-point for boards/architectures that can
   perform late fixups depending on a fully populated spl_image
   structure (i.e. we'll know the final boot_device and have info
   on the image type and operating system to be booted).
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: NKlaus Goger <klaus.goger@theobroma-systems.com>

The SPL code for smartweb is close to its limit and adding a few extra
instructions to SPL will cause it to overrun its sram allotement (thus
causing build failures).  To allow adding the 'spl_perform_fixups'
extension point to SPL, we'll enable SPL_TINY_MEMSET for smartweb.
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Series-cc: trini

All other rockchip boards have rk_board_late_init() hook,
so add it to rk3188 boards also.
Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

rk3066 and rk3188 has two I2C controller implementations.
Current I2C driver wan't work with legacy implementation.
Switching between controllers is performed using a bit inside
GFR_SOC_CON1 register. The bit setting is performed by pinctrl
driver. The patch ask pinctrl to do settings.
Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
[fix warnings by including the rk3228 variant in the compatible-list]:
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Signed-off-by: NTom Rini <trini@konsulko.com>

Explicitly add 'python' call for 'acs_tool.pyc', to avoid failed
execution on some OSes.
Signed-off-by: NLoic Devulder <ldevulder@suse.de>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>

Enable ADC support on the Khadas VIM board.
Signed-off-by: NLoic Devulder <ldevulder@suse.de>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>

Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.5
(Linux commit 54fb3c180d05e9dfda892a93413514e99f0cbb19).

This will enable HDMI_5V for USB Amlogic Meson GXL P212 based boards.
Signed-off-by: NLoic Devulder <ldevulder@suse.de>

This tests that the importing of an environment with a specified
whitelist works as intended.

If there are variables passed as parameter to the env import command,
those only should be imported in the current environment.

For each variable passed as parameter, if
 - foo is bar in current env and bar2 in exported env, after importing
 exported env, foo shall be bar2,
 - foo does not exist in current env and foo is bar2 in exported env,
 after importing exported env, foo shall be bar2,
 - foo is bar in current env and does not exist in exported env (but is
 passed as parameter), after importing exported env, foo shall be empty
 ONLY if the -d option is passed to env import, otherwise foo shall be
 bar,

Any variable not passed as parameter should be left untouched.

Two other tests are made to test that size cannot be '-' if the checksum
protection is enabled.
Signed-off-by: NQuentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

While the `env export` can take as parameters variables to be exported,
`env import` does not have such a mechanism of variable selection.

Let's add the ability to add parameters at the end of the command for
variables to be imported.

Every env variable from the env to be imported passed by parameter to
this command will override the value of the variable in the current env.

If a variable exists in the current env but not in the imported env, if
this variable is passed as a parameter to env import, the variable will
be unset ONLY if the -d option is passed to env import, otherwise the
current value of the variable is kept.

If a variable exists in the imported env, the variable in the current
env will be set to the value of the one from the imported env.

All the remaining variables are left untouched.

As the size parameter of env import is positional but optional, let's
add the possibility to use the sentinel '-' for when we don't want to
give the size parameter (when the env is '\0' terminated) but we pass a
list of variables at the end of the command.

env import addr
env import addr -
env import addr size
env import addr - foo1 foo2
env import addr size foo1 foo2

are all valid.

env import -c addr
env import -c addr -
env import -c addr - foo1 foo2

are all invalid because they don't pass the size parameter required for
checking, while the following are valid.

env import addr size
env import addr size foo1 foo2

Nothing's changed for the other parameters or the overall behaviour.

One of its use case could be to load a secure environment from the
signed U-Boot binary and load only a handful of variables from an
other, unsecure, environment without completely losing control of
U-Boot.
Signed-off-by: NQuentin Schulz <quentin.schulz@bootlin.com>
Tested-by: NAlex Kiernan <alex.kiernan@gmail.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

When vars are passed to the himport_r function with H_NOCLEAR flag,
those vars will be overridden in the current environment and if one of
those vars is not in the imported environment, it'll be deleted in the
current environment whatever the flag passed to himport_r.

The H_NOCLEAR flag is used to clear the whole environment whether vars
are passed to the function or not.

This leads to incoherent behaviour. If one passes vars to himport_r
with the H_NOCLEAR flag, if a var in vars is not in the imported env,
that var will be removed from the current env.

If one passes vars to himport_r without the H_NOCLEAR flag, the whole
environment will be removed and vars will be imported from the
environment in RAM.

It makes more sense to keep the variable that is in the current
environment but not in the imported environment if the H_NOCLEAR flag is
set and remove only that variable if the H_NOCLEAR flag is not set.

Let's clear the whole environment only if H_NOCLEAR and vars are not
passed to himport_r.

Let's remove variables that are in the current environment but not in
the imported env only if the H_NOCLEAR flag is not passed.
Suggested-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NQuentin Schulz <quentin.schulz@bootlin.com>

Some functions have different behaviour when the given address is 0
(assumed to be NULL by the function).

find_ram_base() does not return 0 anymore so it's safe to remove those
offsets.
Suggested-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NQuentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

Some functions test that the given address is not NULL (0) and fail or
have a different behaviour if that's the case (e.g. hexport_r).

Let's make the RAM base address to be not zero by setting it to 2MiB if
that's the case.

2MiB is chosen because it represents the size of an ARM LPAE/v8 section.
Suggested-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NQuentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

The error message should start with `## Error: ` so that it's easily
detectable by tests without needing to have a complex regexp for
matching all possible error message patterns.

Let's add the `## Error: ` prefix to the error messages since it's the
one already in use.
Suggested-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NQuentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

HSE and LSE bypass shall support both analog and digital signals.
This patch add a way to select digital bypas case in the device tree
and set the associated bit DIGBYP in RCC_BDCR and RCC_OCEN register
during clock tree initialization.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

Add ADC clock gating, that may be used by STM32 ADC.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

Alignment with kernel clock driver
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

This patch add clk_enable/clk_disable/clk_get_rate support for
- DSI_PX
- LTDC_PX
- DSI_K (only get rate)

These clocks are needed for LTDC and DSI drivers with latest device tree.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

the function compute the VCO PLL freq, used in
- stm32mp1_read_pll_freq()
- pll_set_rate()
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
# Conflicts:
#	drivers/clk/clk_stm32mp1.c