- 07 6月, 2016 4 次提交
-
-
由 Andre Przywara 提交于
Some SPL loaders (like Allwinner's boot0, and Broadcom's boot0) require a header before the actual U-Boot binary to both check its validity and to find other data to load. Sometimes this header may only be a few bytes of information, and sometimes this might simply be space that needs to be reserved for a post-processing tool. Introduce a config option to allow assembler preprocessor commands to be inserted into the code at the appropriate location; typical assembler preprocessor commands might be: .space 1000 .word 0x12345678 Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NSteve Rae <srae@broadcom.com> Commit Notes: Please note that the current code: start.S (arm64) and vectors.S (arm) already jumps over some portion of data already, so this option basically just increases the size of this region (and the resulting binary). For use with Allwinner's boot0 blob there is a tool called boot0img[1], which fills the header to allow booting A64 based boards. For the Pine64 we need a 1536 byte header (including the branch instruction) at the moment, so we add this to the defconfig. [1] https://github.com/apritzel/pine64/tree/master/tools END Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Use a single defconfig for all DRA7xx hs platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Dirk Eibach 提交于
There is new strider cpu flavor with DisplayPort video. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Dirk Eibach 提交于
There is a new strider console flavor with DisplayPort video. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 06 6月, 2016 7 次提交
-
-
由 Michal Simek 提交于
For boards which have more devices it is necessary to extend malloc space. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enable support for RAM based FIT images read by SPL. Empty function for now to keep compiler happy. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
zc1751-dc4 contains four GEMs. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add debug uart for zc1751-dc2. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Select MSR instructions via Kconfig instead of xparameters.h. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Remove autogenerated config.mk and select CPU options via Kconfig. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Simplify board file by enabling CMD_NAND via Kconfig. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 04 6月, 2016 6 次提交
-
-
由 Masahiro Yamada 提交于
Create an entry for "config USB_XHCI_DWC3" in Kconfig and switch over to it for all boards. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
These Blackfin boards are the last ones that define CONFIG_USB in their headers. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Prabhakar Kushwaha 提交于
QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development platform, with a complete debugging environment. The LS1012AFRDM board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: NCalvin Johnson <calvin.johnson@nxp.com> Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Prabhakar Kushwaha 提交于
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: NCalvin Johnson <calvin.johnson@nxp.com> Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Prabhakar Kushwaha 提交于
QorIQ LS1012A Development System (LS1012AQDS) is a high-performance development platform, with a complete debugging environment. The LS1012AQDS board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: NCalvin Johnson <calvin.johnson@nxp.com> Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: NAbhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 03 6月, 2016 2 次提交
-
-
由 Marek Vasut 提交于
Enable support for tiny printf on the omap3_logic board to trim down the SPL size. This makes the SPL actually build again and fit into the SRAM. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: lesne@alse-fr.com Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
This fixes the last remaining libgcc warning, where the symbol was defined twice. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 02 6月, 2016 2 次提交
-
-
由 Marek Vasut 提交于
Enable both features to reduce the SPL size by 6 kiB. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de>
-
由 Marek Vasut 提交于
Add support for board based on the popular Altera Cyclone V SoC. This board has the following properties: - 1 GiB of DRAM - 1 Gigabit ethernet - 1 USB gadget port - 1 USB host port with an on-board hub - 2 QSPI NORs connected to the Cadence QSPI core - Multiple I2C EEPROMs and one I2C temperature sensor Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> --- V2: Update the defconfig as per Tom's request
-
- 01 6月, 2016 1 次提交
-
-
由 Stephen Warren 提交于
P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Currently, due to U-Boot's level of support for Tegra186, the only features supported by U-Boot are the console UART and the on-board eMMC. Additional features will be added over time. U-Boot has so far been tested by replacing the kernel image on the device with a U-Boot binary. It is anticipated that U-Boot will eventually replace the CCPLEX bootloader binary, as on previous chips. This hasn't yet been tested. Signed-off-by: NStephen Warren <swarren@nvidia.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 31 5月, 2016 4 次提交
-
-
由 Wills Wang 提交于
This patch enable network function for ap121 board. Signed-off-by: NWills Wang <wills.wang@live.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Daniel Schwierzeck 提交于
Add defconfigs for recently introduced MIPS64 support on Malta boards to get more build coverage for MIPS64. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
EFI is not needed on x600. So lets remove the EFI support to make it fit into the 0x60000 image size limit again. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Peter Robinson 提交于
In the big move of CONFIG_HUSH_PARSER to config files the clearfog somehow missed out. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 30 5月, 2016 1 次提交
-
-
由 Bin Meng 提交于
Enable ACPI table generation by creating a DSDT table. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 28 5月, 2016 13 次提交
-
-
由 Lokesh Vutla 提交于
Add minimal dts support for AM335x-ICEv2 board Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NRoger Quadros <rogerq@ti.com>
-
由 Lokesh Vutla 提交于
Add initial DTS support for AM335x-BBG Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
Add initial DTS support for AM335x-evm sk. Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
Use a single defconfig for all AM335x platforms by enabling FIT Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Convert usb host boot defconfig to use DM, DT. Also enable FIT support. Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
Add initial DTS support for AM437x-IDK evm. Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
Add initial DTS support for AM43-EPOS evm. Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
Use a single defconfig for all AM43xx platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Removing: uart3_defconfig: Now uart3 can be selected using menuconfig, removing separate config for uart mode. Doing uart boot is not straight forward as ROM uses uart3 as default serial console. In order to boot to prompt, concole in both u-boot and kernel needs to be changed. qspiboot_defconfig: The only advantage of enabling QSPI_BOOT is selecting env in QSPI. Eventually env needs to be selected by menuconfig so removing qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig. Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
Use a single defconfig for all DRA7 platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Daniel Allred 提交于
Adds new defconfig files for DRA7xx and AM57xx secure devices. These are the same as the non-secure parts, but with the addition of the CONFIG_TI_SECURE_DEVICE option set to 'y'. Signed-off-by: NDaniel Allred <d-allred@ti.com> Signed-off-by: NMadan Srinivas <madans@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Daniel Allred 提交于
Adds the board specific ft_board_setup() functions that are called when CONFIG_OF_BOARD_SETUP is defined. These functions will currently just call the ft_cpu_setup() function. Adds CONFIG_OF_BOARD_SETUP to the defconfig files for dra72_evm, dra74_evm, and am57xx_evm. Signed-off-by: NDaniel Allred <d-allred@ti.com> Signed-off-by: NMadan Srinivas <madans@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Madan Srinivas 提交于
Adds a new defconfig file for the AM43xx secure device. This is the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_ISW_ENTRY_ADDR updated for secure images. Signed-off-by: NDaniel Allred <d-allred@ti.com> Signed-off-by: NMadan Srinivas <madans@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-