- 29 11月, 2017 15 次提交
-
-
由 Wilson Lee 提交于
Putting board_nand_init() function inside NAND driver was not appropriate due to it doesn't allow board vendor to customise their NAND initialization code such as adding NAND lock/unlock code. This commit was to move the board_nand_init() function from NAND driver to board.c file. This allow customization of board_nand_init() function. Signed-off-by: NWilson Lee <wilson.lee@ni.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Keng Soon Cheah <keng.soon.cheah@ni.com> Cc: Chen Yee Chew <chen.yee.chew@ni.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Cc: Scott Wood <oss@buserror.net> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
After some generic cleanup adding ps7_init* to repository is not big pain now. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Show information about silicon in bootlog. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There is no reason to show information about board twice. Remove boardinfo late calls. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Sparse is return warning about this: arch/arm/mach-zynq/slcr.c: In function 'zynq_slcr_get_mio_pin_status': arch/arm/mach-zynq/slcr.c:185:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) { ^ Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Use generic implementation. It will also reduce config data size for converted boards. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add proper support for EMIT_WRITE operation which is write only. Do not use EMIT_MASKWRITE which is read-modify-write. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Unfortunately camelcase is coming from ps7_init* format. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
This patch is based on work done in topic board where the first address word also storing operation which should be done. This is reducing size of configuration data. This patch is not breaking an option to copy default ps7_init_gpl* files from hdf file but it is doing preparation for ps7_init* consolidation. The patch is also marking ps7_config as weak function. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There is no reason to call separate function. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Extract ps7_* from spl code to prepare for extension. And also return value. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
SPL is not calling this code that's why it is dead code and can be removed. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enable debug uart by default. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add missing declaration to header. Warning log: arch/arm/mach-zynq/spl.c:94:12: warning: symbol 'ps7_post_config' was not declared. Should it be static? Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Add support for non processor mode, this mode doesn't have access to some of the registers and hence this patch bypasses it and also length has to be calculated from status instead of app4 in this mode. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
-
- 28 11月, 2017 25 次提交
-
-
Read dma address using fdtdec_get_addr as it checks for address cells and size cells and reads the address properly. fdtdec_get_int always assume address is of int size which goes wrong if using it on 64-bit architecture. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Use wait_for_bit instead while loop during init Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
-
由 Michal Simek 提交于
It is good to see revision in boot log. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Shubhrajyoti Datta 提交于
Enable watchdog in dts for zcu102. Signed-off-by: NShubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add comment about irq present on the board connected to PL. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Anurag Kumar Vulisha 提交于
This patch makes SMMU work by moving the iommus node under the dwc3 child entry from parent node. Signed-off-by: NAnurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
clock setting is handled via clk dtsi file. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Anurag Kumar Vulisha 提交于
This patch uncomments snps,quirk-frame-length-adjustment which has the value to adjust the SOF/ITP generated from the controller. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Manish Narani 提交于
This patch adds OTG interrupt support in device tree. It will add an extra interrupt line number dedicated to OTG events. This will enable OTG interrupts to serve in DWC3 OTG driver. Signed-off-by: NManish Narani <mnarani@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Manish Narani 提交于
This patch adds CCI support for USB when CCI is enabled in design. This patch also adds 'reg' property for Xilinx USB 3.0 IP. The 'reg' property is added in order to modify a register in that to enable coherency in Hardware. Also add address to unit name to avoid dtc warning Signed-off-by: NManish Narani <mnarani@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Anurag Kumar Vulisha 提交于
This patch adds support for reading silicon revision using zynqmp nvmem driver. Signed-off-by: NAnurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Nodes without reg properties shouldn't be placed in amba node. Move them out. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
The AMS includes an ADC as well as on-chip sensors that can be used to sample external voltages and monitor on-die operating conditions, such as temperature and supply voltage levels. Signed-off-by: NRajnikant Bhojani <rajnikant.bhojani@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Manish Narani 提交于
This patch sets host quirk2 bit field for No 1.8V supported in case of 1.0 silicon. The 1.0 silicon doesn't have support for UHS-I modes. This property will ensure the SD runs on High Speed mode. Signed-off-by: NManish Narani <mnarani@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Anurag Kumar Vulisha 提交于
This patch modifies the phy_zynqmp.c driver to use reset-controller framework for asserting/de-asserting reset for High Speed modules. Also fix documentation and dtsi. Signed-off-by: NAnurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Anurag Kumar Vulisha 提交于
This patch add the reset nodes in zynqmp.dtsi which are used by reset-controller framework Signed-off-by: NAnurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Only silicon v1 requires this termination fix. With new nvmem soc revision nvmem detection driver this can be autodetected at run time and this flag is not needed. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Nava kishore Manne 提交于
Add support for zynqmp nvmem firmware driver. Signed-off-by: NNava kishore Manne <navam@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
1.0 rev is the latest rev. Describe information in eeprom. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Added pin control support in device tree for zynqmp. Signed-off-by: NChirag Parekh <chirag.parekh@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Generic dtsi file can't use the same mac address for all. U-Boot read mac from eeprom in zcu102 case and for others random mac address is generated. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Just header change. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
dtc reports issues with it. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dtb: Warning (unit_address_format): Node /amba/spi@ff040000/spi0_flash0@0/spi0_flash0@00000000 unit name should not have leading 0s arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dtb: Warning (unit_address_format): Node /amba/spi@ff050000/spi1_flash0@0/spi1_flash0@00000000 unit name should not have leading 0s arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (unit_address_format): Node /amba/spi@ff040000/spi0_flash0@0/spi0_flash0@00000000 unit name should not have leading 0s arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (unit_address_format): Node /amba/spi@ff050000/spi1_flash0@0/spi1_flash0@00000000 unit name should not have leading 0s Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add missing alias for gem0 for ep108 to have proper sequence number. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Bharat Kumar Gogada 提交于
- Enabling GTR lane-0 to PCIe - Enabling PCIe node in device tree Signed-off-by: NBharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-