- 23 7月, 2018 17 次提交
-
-
由 Michael Trimarchi 提交于
Fix an invalid usage of the gpr_init function for the imx6ul architecture Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Acked-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Michael Trimarchi 提交于
This function can be used only for some of the nxp SoC. Make it explicit in the comment. This adjust a bit commit 3aa4b703 ("imx: imx6: Move gpr_init() function to soc.c") Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Acked-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Fabio Estevam 提交于
i.MX7 does not support BMODE due to the erratum e10574 ("Watchdog: A watchdog timeout or software trigger will not reset the SOC"), so remove its support. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Michael Trimarchi 提交于
lcdif_power_down should not be included in spl build to avoid build failure introduced by commit eb111bb3Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Michael Trimarchi 提交于
Add the missing gpio phy reset binding to the gpio and reset time configuration Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Jon Nettleton 提交于
Mainline and now the SolidRun 4.9 nxp based tree use the new reorganization of device-tree files that separate out the emmc into its own dtb. u-boot will now look for -emmc in the device tree name if one is detected. Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Jon Nettleton 提交于
Previously we had just made broad assumptions with which of our boards had an eMMC or not even though this is a manufacturing time assembly option. This takes the guessing away and actually checks for the existence of an eMMC and sets up the has_emmc environment variable. Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Baruch Siach 提交于
This macro is not used. Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Jon Nettleton 提交于
The HB2 boards as well as rev 1.5 soms support eMMC booting as well as SDHC. Add the infrastructure to support booting these devices. Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Jon Nettleton 提交于
This code is useful for testing the existance of devices that do not have card detect capabilities. This breaks out the core functionality and leaves the actual init logic and error reporting in mmc_start_init(). Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Baruch Siach 提交于
The IN_PROGRESS macro has been removed in commit bd47c135 (mmc: Fix splitting device initialization). Remove it from the mmc_start_init() function description. Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Stefan Agner 提交于
Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
The GPMI NAND IP seems to be the same as used in i.MX 6Quad. Use the fsl,imx6q-gpmi-nand compatible string like Linux devices trees are. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
This macro allows to detect whether the boot ROM initialized USB already (serial downloader). This is helpful to reliably detect if the system has been recovered via USB serial downloader. Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Stefan Agner 提交于
Support i.MX 6 NAND GPMI driver data from device tree. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefano Babic 提交于
If the bootcounter address is in a cached memory, a flush of dcache must occur after updateing the bootcounter. Issue found on i.MX6 where bootcounter is put into the internal (cached) IRAM. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 22 7月, 2018 2 次提交
-
-
由 York Sun 提交于
Add Kconfig options SPL_ENV_* and TPL_ENV_* and simplify Makefile. This allows SPL/TPL image has different environment setting from full feature U-Boot. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
由 Heinrich Schuchardt 提交于
%s/remove/remote/ Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 21 7月, 2018 21 次提交
-
-
-
由 Klaus Goger 提交于
Currently the fdtfile environment variable is set to CONFIG_DEFAULT_DEVICE_TREE which is іnternally used as U-Boot devicetree source. The OS can use a different filename and Kconfig gives us the ability to select a default devicetree via CONFIG_DEFAULT_FDT_FILE. This also gives user configuring U-Boot via menuconfig the behaviour someone would expect. Signed-off-by: NKlaus Goger <klaus.goger@theobroma-systems.com> Tested-By: NVagrant Cascadian <vagrant@debian.org> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Carlo Caione 提交于
On the veyron board the vcc33_sd regulator is used as vmmc-supply for the SD card. This regulator is powered in the MMC core during power on but its value is never actually set. In the veyron platform the reset value for the LDO output is 1.8V while the standard (min and max) value for this regulator defined in the DTS is 3.3V. When the MMC core enable the regulator without setting its value, the output is automatically set to 1.8V instead of 3.3V. With this patch we preemptively set the value to 3.3V. Signed-off-by: NCarlo Caione <carlo@endlessm.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Carlo Caione 提交于
The GRF_SOC_CON0.grf_force_jtag bit is automatically set at boot and it is preventing the SDMMC to work correctly. Disable the JTAG function on the assumption that a working SD has higher priority over JTAG. Signed-off-by: NCarlo Caione <carlo@endlessm.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Carlo Caione 提交于
Use regulators_enable_boot_on() to init all the regulators with regulator-boot-on property. Signed-off-by: NCarlo Caione <carlo@endlessm.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Jakob Unterwurzacher 提交于
The first dhcp command consistently fails with a timeout when the lion-rk3368 board is connected to a Zyxel GS1100-24E Gigabit Ethernet switch: ethernet@ff290000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Increasing PHY_ANEG_TIMEOUT from the default 4000 to 8000 makes the first dhcp command work reliably. Signed-off-by: NJakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Heinrich Schuchardt 提交于
Without the patch SPL (in case of an error) creates an output like: U-Boot SPL board initMissing DTB The patch adds the missing line feed. So now we get: U-Boot SPL board init Missing DTB Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Heinrich Schuchardt 提交于
Change the description relating to CONFIG_SPL_ROCKCHIP_BACK_TO_BROM to clarify that both RK3288 and RK3036 use CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Heinrich Schuchardt 提交于
%s/rkflashtool/rkdeveloptool/ We are using rkdeveloptool not rkflashtool. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Klaus Goger 提交于
The order distroboot searches for a boot.scr is fixed at compile time. To make BIOS_DISABLE work as expected and boot from mmc1 instead of mmc0 if enabled, we need to change the environment at runtime. Especially as commit: 482cf223 ("rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE") enables the eMMC in U-Boot even if BIOS_DISABLE is active. Signed-off-by: NKlaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Philipp Tomsich 提交于
This implements the new 'spl_perform_fixups' hook for RK3399-based boards and injects the /chosen/u-boot,spl-boot-device with an ofpath corresponding to the boot device used. The intended usage is for the full U-Boot stage to evaluate this in scripts and then adapt its boot-order when using distro-boot. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: NKlaus Goger <klaus.goger@theobroma-systems.com>
-
由 Philipp Tomsich 提交于
To let the full U-Boot know where it was booted from (i.e. which of the entries in /chosen/u-boot,spl-boot-order' contained a valid image), we define (and document) /chosen/u-boot,spl-boot-device as the property that could/should automatically be injected by SPL. This commit only contains a documentation change, which documents the new property and the intended usage. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: NKlaus Goger <klaus.goger@theobroma-systems.com>
-
由 Philipp Tomsich 提交于
On some boards, we want to give the board/architecture-specific code a chance to look at where the next image has been loaded from and perform fixups before starting the next image. This is of particular importance, when we probe multiple devices for bootable payloads and boot the first one found. This change adds the following: - we record the boot_device used into the spl_image structure - we provide an extension-point for boards/architectures that can perform late fixups depending on a fully populated spl_image structure (i.e. we'll know the final boot_device and have info on the image type and operating system to be booted). Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: NKlaus Goger <klaus.goger@theobroma-systems.com>
-
由 Philipp Tomsich 提交于
The SPL code for smartweb is close to its limit and adding a few extra instructions to SPL will cause it to overrun its sram allotement (thus causing build failures). To allow adding the 'spl_perform_fixups' extension point to SPL, we'll enable SPL_TINY_MEMSET for smartweb. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Series-cc: trini
-
由 Alexander Kochetkov 提交于
All other rockchip boards have rk_board_late_init() hook, so add it to rk3188 boards also. Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Alexander Kochetkov 提交于
rk3066 and rk3188 has two I2C controller implementations. Current I2C driver wan't work with legacy implementation. Switching between controllers is performed using a bit inside GFR_SOC_CON1 register. The bit setting is performed by pinctrl driver. The patch ask pinctrl to do settings. Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> [fix warnings by including the rk3228 variant in the compatible-list]: Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Loic Devulder 提交于
Explicitly add 'python' call for 'acs_tool.pyc', to avoid failed execution on some OSes. Signed-off-by: NLoic Devulder <ldevulder@suse.de> Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Loic Devulder 提交于
Enable ADC support on the Khadas VIM board. Signed-off-by: NLoic Devulder <ldevulder@suse.de> Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Loic Devulder 提交于
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.5 (Linux commit 54fb3c180d05e9dfda892a93413514e99f0cbb19). This will enable HDMI_5V for USB Amlogic Meson GXL P212 based boards. Signed-off-by: NLoic Devulder <ldevulder@suse.de>
-