- 07 11月, 2014 10 次提交
-
-
由 Khoronzhuk, Ivan 提交于
There is no reason to sprintf simple string. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
The keystone2 evm can boot from USB partition with FAT32 FS, so enable generic load command and fatload command usage. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Khoronzhuk, Ivan 提交于
The Multicore Software Development Kit (MCSDK) provides foundational software for TI KeyStone II device platforms. It's supposed to be used with uboot, and it's convenient to have the same names for images, so correct environment image names according to the last MCSDK3. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Murali Karicheri 提交于
Currently to customize env for various ks2 boards, individual variables such as NAME_FS etc are defined and included in the common config.h to define CONFIG_EXTRA_ENV_SETTINGS. This doesn't scale well if a variable is not applicable on a specific board. Using this scheme, we have to define variables with empty value and it's ugly. Instead, to allow board specific customization of default env variable, define a common CONFIG_EXTRA_ENV_KS2_SETTINGS for all common variables and define board specific variables in individual board specific config.h using CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS. Use the common and board specific variables to define CONFIG_EXTRA_ENV_SETTINGS. This way more variables can be added in future for individual boards without affecting the other config.h files. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Khoronzhuk, Ivan 提交于
The verification qm_cfg existence is done at ksnav_init(). So, there is no need to verify it after initialization. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Murali Karicheri 提交于
To allow out of box demo, change default boot mode to ubi boot now that NAND is functional in latest EVMs. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Khoronzhuk, Ivan 提交于
The UBI volume name has to be prefixed with "ubi:". Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Guillaume GARDET 提交于
ARM: TI: omap3: remove raw initrd support in omap3_igep00x0 config file since it is now in ti_armv7_common.h Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Guillaume GARDET 提交于
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Hao Zhang 提交于
As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512/88E1514 Rev A0, Errata Section 3.1 Marvell PHY has an errata which requires that certain registers get written in order to restart autonegotiation. Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 06 11月, 2014 9 次提交
-
-
由 Khoronzhuk, Ivan 提交于
Currently Keystone2 Lamar evm (K2L) board is added, so update Keystone2 readme file to have such one. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
This patch adds network support code and enables keystone_net driver usage for k2l_evm evaluation board. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
The Keystone2 Lamar SoC uses the same keystone net driver. This patch adds opportunity to use it by K2L SoCs. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
Keystone2 Lamar SoC uses the same keystone SerDes driver. All Keystone2 EVM boards currently use SerDes driver, so move CONFIG_TI_KEYSTONE_SERDES to common configuration file. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
The Keystone2 Lamar SoC uses the same keystone navigator. Move queue numbers to common hardware file, as all Keystone2 SoCs have the same ones. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Dileep Katta 提交于
Signed-off-by: NDileep Katta <dileep.katta@linaro.org> [trini: Rework so that am335x_evm_usbspl still builds] Signed-off-by: NTom Rini <trini@ti.com>
-
由 Paul Kocialkowski 提交于
Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Make enabling support for NOR (and describe where it's seen) be done via Kconfig. Signed-off-by: NTom Rini <trini@ti.com>
-
- 05 11月, 2014 21 次提交
-
-
-
-
由 Hans de Goede 提交于
This is necessary for the device-model enabled builds to work properly. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Hans de Goede 提交于
This is necessary for the device-model enabled builds to work properly. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a driver for the designware serial UART used on sunxi. This just redirects to the normal ns16550 driver. Add a stdout-path to the device tree so that the correct UART is chosen. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Simon Glass 提交于
This adds driver model support to the sunxi GPIO driver, using the device tree to trigger binding of the driver. The driver will still operate without driver model too. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Simon Glass 提交于
The scsi_init() function uses a GPIO so should request it. There is no way to return an error here, and the request may be made multiple times, so just ignore errors for now. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Simon Glass 提交于
With driver model we will have access to a bank pointer, so we want to use it rather than converting back to a number, and then back to a bank pointer. Add functions to provide this feature. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Simon Glass 提交于
For now we won't want to mess with the existing configurations. Create a new one which will enable device tree and driver model. Note that this brings the device tree binary into u-boot-sunxi-with-spl.bin. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Simon Glass 提交于
These are from Linux 3.17-rc7 (commit fe82dcec). U-Boot only uses a small portion of these, but we may as well have something to look forward to. The total compiled size is about 25KB. Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Ian Campbell 提交于
$ make BOARD_felconfig is more convenient than $ make BOARD_defconfig $ echo CONFIG_SPL_FEL=y >> .config $ echo CONFIG_SPL_FEL=y >> spl/.config Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Ian Campbell 提交于
This was done automatically with the following bits of scripting. The Kconfig choice content was generated with this script snippet: for i in $(git grep -l CONFIG_ARCH_SUNXI configs/*) ; do TARGET=$(sed -n -e 's/CONFIG_SYS_EXTRA_OPTIONS="\([^,"]\+\).*/\1/p' $i); MACH=$(sed -n -e 's/.*CONFIG_\(MACH_SUN.I\)=./\1/p' $i) echo "config TARGET_$TARGET" echo " bool \"$TARGET\"" echo " depends on $MACH" echo done defconfigs were updated with a sed script (t): # Extract board from first entry of CONFIG_SYS_EXTRA_OPTIONS, /^CONFIG_SYS_EXTRA_OPTIONS/ { s/^\(CONFIG_SYS_EXTRA_OPTIONS="\)\([^,"]\+\),\?\(.*\)/\1\3\nCONFIG_TARGET_\2=y/; # Print and delete first line (CONFIG_SYS_EXTRA_OPTIONS), leaving # CONFIG_TARGET_<BOARD> in pattern space P;D; }; # Move CONFIG_TARGET_<BOARD> to hold space /^CONFIG_TARGET/{h;n} # Print CONFIG_TARGET_<BOARD> after CONFIG_MACH_<SOC> in either SPL or # normal mode. /^CONFIG_MACH/{p;g;p;n}; /^\+S:CONFIG_MACH/{p;g;s/^CONFIG_TARGET/+S:&/;p;n}; # Print any remaining lines normally p; Run as: sed -i -n -f t $(git grep -l CONFIG_ARCH_SUNXI configs/*) and then manually removing the one instance of CONFIG_SYS_EXTRA_OPTIONS="" from Colombus_defconfig board/sunxi/Makefile was updated with: sed -e 's/^\(obj-\$(CONFIG_\)\(.*\)\().*+= dram_.*\)/\1TARGET_\2\3/g' board/sunxi/Makefile and manually retabbing a few lines to line up again. The board descriptions could certainly be improved. Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Ian Campbell 提交于
This can now be configured via Kconfig, e.g. with: $ make BOARD_defconfig $ echo CONFIG_SPL_FEL=y >> .config $ echo CONFIG_SPL_FEL=y >> spl/.config Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Ian Campbell 提交于
Mostly automatic with: sed -i -e 's/CONFIG_\(SUN[45678]I\)/CONFIG_MACH_\1/g' $(git grep -l CONFIG_SUN[45678]I) followed by removing the relevant #defines from include/configs/sun?i.h by hand. Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Ian Campbell 提交于
It's unfortunate that this needs to be present in both .config and spl/.config since it makes it slightly hard to enable FEL mode for a regular defconfig. It can be done with: echo CONFIG_SPL_FEL=y >> .config echo CONFIG_SPL_FEL=y >> spl/.config Ideally only one of those would be needed. Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Ian Campbell 提交于
Now we have CONFIG_ARCH_SUNXI as the toplevel, CONFIG_MACH_SUN[45678]I as the per-SoC option and leave CONFIG_TARGET_BLAH free for individual boards in the future. Done automatically with: sed -i -e 's/TARGET_\(SUN[45678]I\)/MACH_\1/g' $(git grep -l TARGET_SUN[45678]I) Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Ian Campbell 提交于
And make TARGET_SUN[45678]I a choice variable under this. configs updated with: sed -i -e 's/^\(\+S:\)\?CONFIG_TARGET_SUN.I=y/\1CONFIG_ARCH_SUNXI=y\n&/g' configs/* Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The defconfig for Ippo-q8h-v5 was incorrectly committed as "Ippo_q8h". This patch renames it correctly, as well as correct a typo in my name in the maintainers listing. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Dirk Eibach 提交于
I realized that with v2014.10 u-boot is not starting up on ppc4xx boards with CONFIG_SYS_GENERIC_BOARD set. I bisected it down to this: d54d7eb9 support blackfin board initialization in generic board_f With d29437aa ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD I set gd to a defined value for ppc4xx in cpu_init_f(). I did not realize that the gd struct has also to be memset() to zero at this point. But at least commit d54d7eb9 assumes it is: @@ -516,11 +528,13 @@ static int reserve_malloc(void) /* (permanently) allocate a Board Info struct */ static int reserve_board(void) { - gd->start_addr_sp -= sizeof(bd_t); - gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t)); - memset(gd->bd, '\0', sizeof(bd_t)); - debug("Reserving %zu Bytes for Board Info at: %08lx\n", - sizeof(bd_t), gd->start_addr_sp); + if (!gd->bd) { + gd->start_addr_sp -= sizeof(bd_t); + gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t)); + memset(gd->bd, '\0', sizeof(bd_t)); + debug("Reserving %zu Bytes for Board Info at: %08lx\n", + sizeof(bd_t), gd->start_addr_sp); + } return 0; } #endif This might also be an issue on other architectures, so maintainers should check. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
-
由 Gerald Kerma 提交于
This patch fix the kwimage tools for version 0 fileformat used for kirkwood Tested on sheevaplug Signed-off-by: NGerald Kerma <drEagle@doukki.net> Tested-by: NStefan Roese <sr@denx.de> Reviewed-by: NStefan Roese <sr@denx.de> Acked-By: NPrafulla Wadaskar <prafulla@marvell.com>
-