- Fix command help message
- Disable DEBUG by default
- Fix whitespace issues
- Fix lines > 80 characters
Signed-off-by: NPeter Tyser <ptyser@gmail.com>
Acked-by: NStefan Roese <sr@denx.de>

The top build system sets up HOSTCFLAGS a bit and exports it, but other
places use HOST_CFLAGS instead.  Unify the two as HOSTCFLAGS so that the
values stay in sync.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch adds I2C support for mvBC-P and defines flash layout
matching the shipped product.
Signed-off-by: NAndré Schwarz <andre.schwarz@matrix-vision.de>

ahci.c: In function 'ata_scsiop_read_capacity10':
ahci.c:616: warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

biosemu.c: In function 'BE_setVGA':
biosemu.c:147: warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Support for this type was lost during the bootm refactoring.
Signed-off-by: NDetlev Zundel <dzu@denx.de>

Signed-off-by: NDetlev Zundel <dzu@denx.de>

Previously, non-e500 architectures only unlocked their data cache which
was used as early RAM when booting to Linux using the "bootm" command.
This change causes all PPC boards with CONFIG_SYS_INIT_RAM_LOCK defined
to unlock their data cache during U-Boot's initialization.  This
improves U-Boot performance and provides a common cache state when
booting to different OSes.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

This patch updates zlib to the latest stable version.

Only relevant zlib parts were ported to u-boot tree, as was done for
the previously used version of zlib (0.95). New zlib gives faster
inflate performance and other improvements, see www.zlib.net
Signed-off-by: NGiuseppe Condorelli <giuseppe.condorelli@st.com>
Reviewed-by: NAngelo Castello <angelo.castello@st.com>

Edited commit message
Signed-off-by: NWolfgang Denk <wd@denx.de>

Linux's netconsole works much better when you can pass it the MAC address of
the server. (otherwise it just uses broadcast, which everyone else on my
network complains about :)

This sets the env var "serveraddr" (to match ethaddr), so that you can pass
it to linux with whatever bootargs you want to....

addnetconsole=set bootargs $(bootargs) netconsole=@$(ipaddr)/eth0,@$(serverip)/$(serveraddr)
Signed-of-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This patch fixes a compilation warning for some Ethernet PHY-less
PPC4xx platforms (440SPE based ones) and a potential compilation
error for 440SP platforms (use of undefined 'ethgroup' variable).
In the original code and in case of 440SPE platforms, 'ethgroup'
is initialized to -1 and never modified.  Later in the function,
within an #ifdef statement, an 'if statement' executes code only
if 'ethgroup' is set to 4, therefore it is harmless to avoid
executing the 'if statement' by removing the CONFIG_440SPE from
the affected #ifdefs.  In case of 440SP platforms  with on-board
Ethernet PHY, 'ethgroup' is undefined but used (there are not such
platforms in the repository yet). All other architectures are not
affected by this change.

Signed-off-by: Alessio Centazzo acpatin@yahoo.com
Acked-by: NStefan Roese <sr@denx.de>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Fixed the DHCP/BOOTP/RARP regression introduced in u-boot-2009.06
by initializing our IP addr to 0 in order to accept any IP addr
assigned to us by the DHCP/BOOTP/RARP server.
Ack-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NMichael Zaidman <michael.zaidman@gmail.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

With these fixes, this driver works properly for multi chip
addressging mode

Bugfixes:
1. Build error fixed for function mv88e61xx_busychk_multic-fixed
2. PHY dev address error detection- fixed
3. wrong busy bit was refered in function mv88e61xx_busychk -fixed
4. invalid data read ptr was refered for RD_PHY in case of
	multichip addressing mode -fixed

The Multichip Address mode is tested with RD6281A board having
MV88E6165 switch on it
Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

The Marvell documentation for the 88f6281 states that the error coding
is only valid if the error summary and last frame bits in the transmit
descriptor status field are set. This patch adds checks for these for
transmit (I would get transmit errors on bootp with the current check,
which I believe are spurious).
Signed-off-by: NSimon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

kwgbe_send/recv both have loops waiting for the hardware to set  a bit.
GCC 4.3.3 cleverly optimizes the send case to ... a while(1); loop. This
patch uses readl to force a read from device memory. Other volatile
accesses have also been replaced with readl/writel where appropriate
(as per suggestions on the U-boot mailing list).
Signed-off-by: NSimon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This patch sets the returned value to 0xFFFF if the PHY does not exist
and does not assert Transfer Acknowledge. A NULL check for the value
pointer is also added for buffer overflow protection.

Without this patch 'mii info' will  show 'phantom' devices because the
value will be not be initialized and return with some random value.
Signed-off-by: NRichard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

All in-tree boards that use this controller have CONFIG_NET_MULTI added
Also:
 - changed CONFIG_DRIVER_SMC911X* to CONFIG_SMC911X*
 - cleaned up line lengths
 - modified all boards that override weak function in this driver
 - added
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
Tested-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

These PHYs are on P2020RDB platform.

Also revamped Freescale copyright message in drivers/net/tsec.c.
Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

On 04 Oct 2008 Pieter posted a dns implementation for U-Boot.

http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg10216.html
>
> DNS can be enabled by setting CFG_CMD_DNS. After performing a query,
> the serverip environment var is updated.
>
> Probably there are some cosmetic issues with the patch. Unfortunatly I
> do not have the time to correct these. So if anybody else likes DNS
> support in U-Boot and has the time, feel free to patch it in the main tree.

Here it is again - slightly modified & smaller:
  - update to 2009-06 (Pieter's patch was for U-Boot 1.2.0)
  - README.dns is added
  - syntax is changed (now takes a third option, the env var to store
    the result in)
  - add a random port() function in net.c
  - sort Makefile in ./net/Makefile
  - dns just returns unless a env var is given
  - run through checkpatch, and clean up style issues
  - remove packet from stack
  - cleaned up some comments
  - failure returns much faster (if server responds, don't wait for
    timeout)
  - use built in functions (memcpy) rather than byte copy.
Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NPieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

fix this gcc 4.4 warning:

tsec.c: In function 'tsec_init':
tsec.c:200: warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

The net code is mostly consistent in using 'Packet' rather than 'Pkt', so
rename the minor detractor to follow suite.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NAndreas Pretzsch <apr@cn-eng.de>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

CSB337 boards originally shipped with MicroMonitor, not U-Boot;
and with a version using a different convention for recording
Ethernet addresses than anyone else.  To avoid breaking Linux
when it uses U-Boot, have it use the same convention on that
hardware.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NDieter Kiermaier <dk-arm-linux@gmx.de>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Tested-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

This is Marvell's 88F6281_A0 based reference design board

This patch is tested for-
1. Boot from DRAM/NAND flash/NFS
2. File transfer using tftp and loadb
3. NAND flash read/write/erase
Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This patch fixes broken build introduced by commit
84bf7ca5 (api: remove un-needed
ifdef CONFIG_API already handle by the Makefile).
Signed-off-by: NPiotr Ziecik <kosmo@semihalf.com>