This removes the following checkpatch issue:
 - ERROR: do not use assignment in if condition.

There is one such error left:

  ERROR: do not use assignment in if condition
  #239: FILE: tftp.c:239:
  +		if (!ProhibitMcast
  +		 && (Bitmap = malloc(Mapsize))
  +		 && eth_get_dev()->mcast) {

which would require an additional nested if to be fixed, resulting in longer
and less readable code.
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

This removes the following checkpatch issues:
 - ERROR: "foo * bar" should be "foo *bar"
 - ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

This removes the following checkpatch issues:
 - ERROR: space prohibited before that close parenthesis ')'
 - ERROR: space required after that ';' (ctx:BxV)
 - ERROR: space required after that ',' (ctx:VxV)
 - ERROR: space required after that ';' (ctx:VxV)
 - ERROR: spaces required around that '<<=' (ctx:VxV)
 - ERROR: spaces required around that '<' (ctx:VxV)
 - ERROR: spaces required around that '=' (ctx:VxV)
 - ERROR: spaces required around that '+=' (ctx:VxV)
 - ERROR: spaces required around that '=' (ctx:VxW)
 - WARNING: please, no spaces at the start of a line
 - WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
  powerpc/85xx: Enable eSPI support on corenet ds boards

The pnvram size was used later from start scripts in linux. Therefore
it was added to the default environment.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: NHeiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>

This is a first step to simplify the default environment. Move all
the environment variables which are only needed for debugging
purpose to textfiles in the scripts directory. In case of debugging
these files can be loaded via tftp into RAM and set via the env import
command. Other variables are identified as obsolete and were removed.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: NHeiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>

BoardId and HWKey are used to identify the HW class of a given board.
The correct values are stored in the inventory eeprom. During creation
time of a boot package the boardId and HWkey for the SW is stored in
the default environment and burned into the flash. During boottime
the values in the inventory and in the environment are compared to
avoid starting of a SW which is not authorized for this board.

Some bootpackages are allowed to run on a set of different boardId
hwKey. In this case the environment variable boardIdListHex was added
to the default environment. In this case the command iterates over the
pair values and compares them with the values read from the inventory
eeprom.

The syntax of such a boardIdListHex value is e.g.: 158_1 159_1 159_2
Signed-off-by: NThomas Herzmann <thomas.herzmann@keymile.com>
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: NHeiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>

Add missing header file to fix compilation warning

omap_hsmmc.c: In function 'omap_mmc_init':
omap_hsmmc.c:474: warning: implicit declaration of function 'get_cpu_family'
omap_hsmmc.c:474: warning: implicit declaration of function 'get_cpu_rev'

introduced by commit "MMC: omap_hsmmc.c: disable
multiblock rw on old rev omap34xx silicon"
(4ca9244d)
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
CC: Andy Fleming <afleming@freescale.com>
CC: John Rigby <john.rigby@linaro.org>

commit 262951(MMC: make b_max unconditional) missed to update fsl_esdhc.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NStefano Babic <sbabic@denx.de>

For emmc, it may have up to 7 partitions: two boot partitions, one
user partition, one RPMB partition and four general purpose partitions.
(Refer to JESD84-A44.pdf/page 154)

As bootloader may need to read out or reflashing images on those

different partitions, it is better to enable the partition switch with
console command support.

Also for partition would be restore to user partition(part 0) when CMD0
is used, so change mmc_init routine to perform normal initialization
only once for each slot, unless use the rescan command to force init
again.
Signed-off-by: NLei Wen <leiwen@marvell.com>
Acked-by: NAndy Fleming <afleming@freescale.com>

mmc command applied device, like ide and usb...
Signed-off-by: NLei Wen <leiwen@marvell.com>
Acked-by: NAndy Fleming <afleming@freescale.com>

A "send status" command is added with the commit "mmc: checking
status after commands with R1b response". But the status register
returned from send status command of SPI protocol is different from
that of MMC/SD protocol. We do a simple test and generate a response
in stead of full bit-by-bit translation.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

Signed-off-by: NShaohui Xie <b21989@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NShaohui Xie <b21989@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* 'master' of git://git.denx.de/u-boot-arm: (40 commits)
  avr32: add ATAG_BOARDINFO
  at91: reworked support for otc570 board
  at91: reworked support for meesc board
  hammerhead: move CONFIG_SYS_TEXT_BASE to header
  mimc200: move CONFIG_SYS_TEXT_BASE to header
  favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header
  atstk100x: move CONFIG_SYS_TEXT_BASE to header
  atngw100: move CONFIG_SYS_TEXT_BASE to header
  mimc200: fix "#define XXXX 1"
  hammerhead: fix "#define XXXX 1"
  favr-32-ezkit: fix "#define XXXX 1"
  atstk1006: fix "#define XXXX 1"
  atstk1004: fix "#define XXXX 1"
  atstk1003: fix "#define XXXX 1"
  atstk1002: fix "#define XXXX 1"
  atngw100: fix "#define XXXX 1"
  avr32: use single linker script
  avr32/config.mk: simplify PLATFORM_RELFLAGS
  avr32: fix linking
  Add support for Bluewater Systems Snapper 9260 and 9G20 modules
  ...

* 'master' of git://git.denx.de/u-boot-nand-flash:
  nand_spl: nand_boot.c: Remove last CONFIG_SYS_NAND_READ_DELAY occurance

This patch adds a new ATAG_BORADINFO to U-Boot. This tag is intended to hand
over the bd->bi_board_number to the linux kernel for early stage board
information like a board revision or other kind of board specific decisions
necessary before the linux peripherial drivers are up.
Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

The otc570 board support was broken. Within this opportunity, I completely
reworked the board files.
Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

The meesc board support was broken. Within this opportunity, I completely
reworked the board files.
Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

This patch move the atstk100x linker script to $(CPUDIR) and delete other
pure copies of this file in each board directory.
Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

This patch removes PLATFORM_RELFLAGS from board specific config.mk files and
define them in arch specific config.mk file.
Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

This patch fixes following error:

---8<---
avr32-linux-ld: --gc-sections and -r may not be used together
--->8---

Since 8aba9dce all avr32 boards are broken due
to linking error as seen above.
Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>

Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
single board computer modules. Includes NAND flash and Ethernet
support.
Signed-off-by: NRyan Mallon <ryan@bluewatersys.com>

Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

* remove __attribute__ ((packed)) to prevent byte access
  to soc registers in some gcc version
Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de>

* use start/end label for initialization tables instead of fix values
Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de>
Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com>