Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>

Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>

Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>

Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>

Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>

Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>

This allows running tests on emulated KC705 board with DC233C xtensa
core. It expects to find conf.xtfpga_qemu in the uboot-test-hooks.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Remove CONFIG_BOOT_RETRY_TIME as it doesn't do much good and enable
CONFIG_HUSH_PARSER in xtfpga_defconfig.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

xtensa toolchains are core-specific, so give full toolchain name and
download corresponding prebuilt toolchain from the github release.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Fix build warning in arch/microblaze/lib/bootm.c with gcc 7.3.0:

  warning: this 'if' clause does not guard... [-Wmisleading-indentation]
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NMichal Simek <michal.simek@xilinx.com>

Fix build warning in arch/arm/mach-omap2/emif-common.c and
arch/arm/mach-omap2/omap4/emif.c with gcc 7.3.0:

  warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Fix build warning in drivers/video/ivybridge_igd.c with gcc 7.3.0:

  warning: 'ivb_pm_gt2' defined but not used [-Wunused-const-variable=]
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Add the missing header, otherwise CONFIG_SYS_MAX_FLASH_BANKS
may be undeclared.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>

Convert the CONFIG_UPDATE_TFTP and related symbols to Kconfig.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>

Convert the CONFIG_CMD_FITUPD symbol to Kconfig.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>

The fdt_record_loadable()-function was wedged between other functions
that were guarded by ARCH_FIXUP_FDT_MEMORY.  This could lead to linker
errors on some configurations.

With this change, fdt_record_loadable() is moved out of the
ARCH_FIXUP_FDT_MEMORY guard (plus I tried to retain alphabetical
ordering for functions by placing it appropriately).

References: 9f45aeb9 ("spl: fit: implement fdt_record_loadable")
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reported-by: NMichal Simek <michal.simek@xilinx.com>
Tested-by: NMichal Simek <michal.simek@xilinx.com>

In the following statements
if (a) return a; if (a) return c;
the second return can never be executed.

Identified by cppcheck.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Signed-off-by: NTom Rini <trini@konsulko.com>

When saving the environment on a platform which has DMA alignment
larger than the natural alignment, env_fat_save triggers a debug
message in file_fat_write:

  Saving Environment to FAT... writing uboot.env
  FAT: Misaligned buffer address (9df1c8e0)
  OK
Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>

On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set.  This is a strict migration of the current
values into the defconfig and removing them from the headers.

I did not attempt to add more default values in and for now will leave
that to maintainers.
Signed-off-by: NTom Rini <trini@konsulko.com>

Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

Patch queue for efi in 2018.03 - 2018-02-10

This time we have a few important bug fixes. Most noticable are:

  - Fix OpenBSD loader with CONFIG_BLK=n
  - Fix builds on various circumstances
  - Add missing stubs so callers don't call NULL
  - Bump UEFI revision to 2.7

efi_disk_register should return as status code (efi_status_t).

Disks with zero blocks should be reported as 'not ready' without throwing
an error.

This patch solves a problem running OpenBSD on system configured with
CONFIG_BLK=n (e.g. i.MX6).
Reported-by: NJonathan Gray <jsg@jsg.id.au>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: NJonathan Gray <jsg@jsg.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add stubs for UpdateCapsule, QueryCapsuleCapabilities, and
QueryVariableInfo.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

README.efi describes two different concepts:
* U-Boot exposing the UEFI API
* U-Boot running on top of UEFI.

This patch splits the document in two.
Religious references are removed.

The separation of the concepts makes sense before detailing the internals
of U-Boot exposing the UEFI API in a future patch.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Change the return type of efi_driver_init() to efi_status_t.

efi_driver_init() calls efi_add_driver() which returns an efi_status_t
value. efi_driver_init() should not subject this value to a conversion to
int losing high bits on 64bit systems.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the UEFI revision number in the system table header is set to
2.0.5. This version number does not refer to any existing version of the
UEFI standard.

Set the revision number to 2.7.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NMark Kettenis <kettenis@openbsd.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently we set the function pointer for the CreateEventEx boot service
to NULL. When called this would lead to an immediate failure.

A function stub is provided which handles the case that the boot service
is called without an event group and returns EFI_UNSUPPORTED otherwise.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

For EFI binaries we need special CFLAGS.

They were specified for an object file that since has been replaced.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The bootefi command is missing in the online help for
bootefi bootmgr.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Before the patch an undefined constant EFI_SUBSYSTEM was used in the
crt0 code. The current version of binutils does not swallow the error.

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403

The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already
defined in pe.h. So let's factor out asm-generic/pe.h for the
image subsystem constants and use it in our assembler code.

IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification
let's use IMAGE_SUBSYSTEM_EFI_ROM instead.

The include pe.h is only used in code maintained by Alex so let him be the
maintainer here too.
Reported-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: NVagrant Cascadian <vagrant@debian.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

To make this driver easier to be reused, dual-license DDR driver.
Signed-off-by: NYork Sun <york.sun@nxp.com>
CC: Simon Glass <sjg@chromium.org>
CC: Tom Rini <trini@konsulko.com>
CC: Heinrich Schuchardt <xypron.glpk@gmx.de>
CC: Thomas Schaefer <thomas.schaefer@kontron.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Robert P. J. Day <rpjday@crashcourse.ca>
CC: Alexander Merkle <alexander.merkle@lauterbach.com>
CC: Joakim Tjernlund <joakim.tjernlund@transmode.se>
CC: Curt Brune <curt@cumulusnetworks.com>
CC: Valentin Longchamp <valentin.longchamp@keymile.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Anatolij Gustschin <agust@denx.de>
CC: Ira W. Snyder <iws@ovro.caltech.edu>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Kyle Moffett <Kyle.D.Moffett@boeing.com>
CC: Sebastien Carlier <sebastien.carlier@gmail.com>
CC: Stefan Roese <sr@denx.de>
CC: Peter Tyser <ptyser@xes-inc.com>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Peter Tyser <ptyser@xes-inc.com>
CC: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

config_phylib_all_drivers.h should be included when CONFIG_PHYLIB and
CONFIG_TSEC_ENET are defined.

Fixes: 3146f0c0 ("Move PHYLIB to Kconfig")
Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Extend the instantiate_rng() function and the corresponding CAAM job
descriptor to instantiate all RNG state handles. This moves the RNG
instantiation code in line with the CAAM kernel driver.

Previously, only the first state handle was instantiated. The second
one was instantiated by the CAAM kernel driver. This works if the
kernel runs in secure mode, but fails in non-secure mode since the
kernel driver uses DEC0 directly instead of over the job ring
interface. Instantiating all RNG state handles in u-boot removes the
need for using DEC0 in the kernel driver, making it possible to use
the CAAM in non-secure mode.
Signed-off-by: NLukas Auer <lukas.auer@aisec.fraunhofer.de>
Tested-by: NBryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Enable validation of boot.scr script prior to its execution dependent
on "secureboot" flag in environment. Enable fall back option to
qspi boot in case of secure boot.
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Remove dependency of SYS_HAS_SERDES for Layerscape Chasis 2 and
Layerscape Chasis 3.
Signed-off-by: NSriram Dash <sriram.dash@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Currently in LS1088A, XIP mode in QSPI works up to 16 MB
addresses. This patch enables QSPI support in XIP mode for
addresses above 16 MB as well.
Signed-off-by: NRajat Srivastava <rajat.srivastava@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Enable PCIe and E1000 in ls1046aqds lpuart defconfig.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>