Disabling PCIE support currently lead to a crash because the code for
erratum A010315 is still run. Add a conditional to only select
CONFIG_SYS_FSL_ERRATUM_A010315 when CONFIG_PCIE_LAYERSCAPE is enabled.
Signed-off-by: NAlban Bedel <alban.bedel@aerq.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Rename emmc_bootcmd environment variable to sd2_bootcmd
to fix emmc boot on lx2162aqds board.
Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Set popts->cpo_sample to 0x54 in t104xrdb/ddr.c to optimize cpo
Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Fix Bad Shift operator issue in step_to_string function
by adding an if check
Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Fix possible divide by zero issue in fsl_ddr_set_memctl_regs
by adding an if check
Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Fix possible divide by zero issue in get_memory_clk_period_ps
by adding a check
Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Pull request for efi-2022-01-rc2

Documentation:
* improve description of mmc rescan
* remove obsolete PPC documenation

UEFI
* Provide unit test for the EFI_TCG2_PROTOCOL
* Implement add EFI_TCG2_PROTOCOL.SubmitCommand
* Start the implementation of a 64 bit EFI app
* Reduce rcar3_salvator-x image size

Currently output of dfu commands ends on a line with leading hash signs
('#'). The succeeding output should be placed on a new line.

After writing updates via dfu print a new line.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>

rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit.

Disable support for Unicode capitalization.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This commit adds the missing EFI_TCG2_PROTOCOL selftest
and Measured Boot selftest in lib/efi_selftest.

This selftest includes PE/COFF image measurement test, some PCR values are
different in each architecture. With that, this commit also adds pre-built
versions of lib/efi_selftest/efi_miniapp_file_image_exit.c for PE/COFF
image measurement test for 32-bit arm, arm64, ia32, x86_64, riscv32 and
riscv64. Prebuilding avoids the problem of reproducible builds.
Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org>

Make the test 'onrequest'.
Add code comments to the includes with the binaries.
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

The current EFI video driver only works when running in the stub. In that
case the stub calls boot services (before jumping to U-Boot proper) and
copies the graphics info over to the efi table. This is necessary because
the stub exits boot services before jumping to U-Boot.

The app maintains access to boot services throughout its life, so does not
need to do this. Update the driver to support calling boot services
directly.

Enable video output for the app. Note that this uses the
EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa.

A sample qemu command-line for this case is:

   qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd
   -drive id=disk,file=try.img,if=none,format=raw -nic none
   -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Add a function to return this information along with a stub for the
efi_info_get() function, since calling it otherwise hangs U-Boot.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This variable is already defined by the EFI code. Drop the duplicate
definition when building a 64-bit EFI app.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app
that runs under that. Add a (non-functional) build for this.

Note that --whole-archive causes the gcc 9.2 linker to crash, so disable
this for now. Once this is resolved, things should work.

For now, avoid mentioning the documentation for the 64-bit app, since it
does not work.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Most EFI implementations use 64-bit but U-Boot only supports running as
a 32-bit app at present. While efi-x86_payload64 does boot from 64-bit
UEFI it immediately changes back to 32-bit before starting U-Boot.

In order to support a 64-bit U-Boot app, update the Kconfig to add an
option for 32/64 bit. Update the prompt for the existing option so it is
clear it relates to the stub. Move both up to just under the choice that
controls them, since this looks better and the menu.

Use CONFIG_EFI_APP in the Makefile instead of CONFIG_TARGET_EFI_APP,
since the latter is specific to a single target and we will have two.

Memory size is set to 32MB for now so that it can run on qemu without
increasing the default memory size. We may need to increase the default
later.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

For the EFI app, we must embed the devicetree in the ELF file since that
is the only thing that is run by UEFI. Drop the warning to avoid
confusion.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>

There is no need to avoid driver model for networking. Drop this.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

It is quite complicated to run U-Boot on QEMU since we have four
different builds and they must use different versions of qemu and the
UEFI binaries.

Add a script to help. It requires U-Boot itself to be built. Once that
is done you can use this script to build an image for use with qemu and
optionally run it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This commit adds the EFI_TCG2_PROTOCOL.SubmitCommand
required in the TCG PC Client PFP spec.
SubmitCommand enables to send the raw command to the TPM device.

To implement this api, tpm2_submit_command() is added
into tpm-v2.c.
Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>

Calling unaligned/access-ok.h version of put_unaligned_le64()
causes data abort in arm 32-bit QEMU.

The similar issue also occurs in linux kernel,
unaligned/access-ok.h is no longer used in linux kernel[1].

This commit uses the unaligned/be_byteshift.h and
unaligned/le_byteshift.h helper instead of unaligned/access-ok.h.

[1]https://lore.kernel.org/all/20210507220813.365382-8-arnd@kernel.org/Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>

As we discussed in ML, currently a device tree is the only place
to store public keys for capsule authentication. So __weak is not
necessary for now.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Provide human readable descriptions of the speed nodes instead of the name
of constants from the code.
Signed-off-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>

The related boards have been removed four years ago already, in
commit 98f705c9 ("powerpc: remove 4xx support"), so this README
file is not required anymore.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NStefan Roese <sr@denx.de>

The PPC440 support has been removed in commit 98f705c9
("powerpc: remove 4xx support"). This patch removes this obsolete
file as well.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

- An assortment of changes to finish migration of a number of symbols,
  and move YAFFS2 related options that we enable to Kconfig as well.

Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BOARD_EARLY_INIT_F
   CONFIG_BOARD_LATE_INIT
   CONFIG_DISPLAY_BOARDINFO
   CONFIG_DISPLAY_BOARDINFO_LATE
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SPL_DRIVERS_MISC
   CONFIG_SPL_ENV_SUPPORT
   CONFIG_SPL_GPIO
   CONFIG_SPL_I2C
   CONFIG_SPL_LDSCRIPT
   CONFIG_SPL_LIBCOMMON_SUPPORT
   CONFIG_SPL_LIBGENERIC_SUPPORT
   CONFIG_SPL_LOAD_FIT_ADDRESS
   CONFIG_SPL_MMC
   CONFIG_SPL_NAND_SUPPORT
   CONFIG_SPL_NO_CPU_SUPPORT
   CONFIG_SPL_OS_BOOT
   CONFIG_SPL_POWER
   CONFIG_SPL_STACK_R
   CONFIG_SPL_STACK_R_ADDR
   CONFIG_SPL_WATCHDOG
   CONFIG_SPL_TEXT_BASE
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BMP_16BPP
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_OF_EMBED
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NRick Chen <rick@andestech.com>

This converts the following to Kconfig:
	CONFIG_MCFUART
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
	CONFIG_FEC_MXC
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
	CONFIG_SUPPORT_EMMC_BOOT
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
	CONFIG_SYS_TEXT_BASE
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
	CONFIG_SYS_HZ
Signed-off-by: NTom Rini <trini@konsulko.com>

When building a system that has both TPL and SPL_OS_BOOT, code which
tests for CONFIG_SPL_OS_BOOT will be built and enabled in TPL, which is
not correct.  While there is no CONFIG_TPL_OS_BOOT symbol at this time
(and likely will not ever be) we can use CONFIG_IS_ENABLED(OS_BOOT) in
these common paths to ensure we only compile these parts in the SPL
case.
Signed-off-by: NTom Rini <trini@konsulko.com>

For the symbols which are both hard-coded as enabled and used, move to
Kconfig.  The rest of the CONFIG_YAFFS namespace is unselected anywhere,
so we leave it as is.
Signed-off-by: NTom Rini <trini@konsulko.com>

- Improved sysreset/watchdog uclass integration (Samuel)

Instead of hardcoding the watchdog for reset, and the PMIC for poweroff,
use the sysreset framework to manage the available poweroff/reset
backends. This allows (as examples) using the PMIC to do a cold reset,
and using a GPIO to power off H3/H5 boards lacking a PMIC. Furthermore,
it removes the need to hardcode watchdog MMIO addresses, since the
sysreset backends can be discovered using the device tree.
Reviewed-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: NSamuel Holland <samuel@sholland.org>
Reviewed-by: NStefan Roese <sr@denx.de>

The sysreset uclass unconditionally provides a definition of the
reset_cpu() function. So does the sunxi board code. Fix the build with
SYSRESET enabled by omitting the function from the board code in that
case. The code still needs to be kept around for use in SPL.
Reviewed-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: NSamuel Holland <samuel@sholland.org>
Reviewed-by: NStefan Roese <sr@denx.de>