- 21 9月, 2014 1 次提交
-
-
由 Albert ARIBAUD 提交于
-
- 19 9月, 2014 11 次提交
-
-
由 Wu, Josh 提交于
Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Wu, Josh 提交于
Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Boris BREZILLON 提交于
Disable subpage write when using PMECC to prevent buggy partial page write. This fix has been taken from linux sources (see commit 90445ff6241e2a13445310803e2efa606c61f276) Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
If the SoC has pcr, we use pcr (peripheral control register) to enable or disable clock. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
If the SoC has pcr, we use pcr (peripheral control register) to enable or disable clock. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
Using CPU_HAS_PCR micro to present the SoC has pcr (peripheral control register). Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
When use pcr (peripheral control register), then we won't need to care about the peripheral ID. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
Signed-off-by: NBo Shen <voice.shen@atmel.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
Add NOR flash hardware init function, including SMC and PIO configuration. Signed-off-by: NBo Shen <voice.shen@atmel.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Wu, Josh 提交于
We defined the macro pmecc_readl(b)/pmecc_writel for pmecc register access. But in the driver we also use the readl(b)/writel. To keep consistent, this patch make all use pmecc_readl(b)/pmecc_writel. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 18 9月, 2014 6 次提交
-
-
由 Guillaume GARDET 提交于
This patch adds boot script support to am335x_evm Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
-
由 Guillaume GARDET 提交于
OMAP4: Use generic 'load' command instead of 'fatload' for 'loadbootscript' and 'loadbootenv' as already done for 'loadimage' and 'loaduimage'. This patch uses generic 'load' command instead of 'fatload' for 'loadbootscript' and 'loadbootenv' as already done for 'loadimage' and 'loaduimage' for OMAP4 boards. This allows to use EXT partition instead of FAT, while keeping FAT compatibility. Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
-
由 Murali Karicheri 提交于
This patch implements a workaround to fix DDR3 memory issue. The code for workaround detects PGSR0 errors and then preps for and executes a software-controlled hard reset.In board_early_init, where logic has been added to identify whether or not the previous reset was a PORz. PLL initialization is skipped in the case of a software-controlled hard reset. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NKeegan Garcia <kgarcia@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Masahiro Yamada 提交于
Commit f219e013 (tools: Import Kconfiglib) added SPDX GPL-2.0+ to this library by mistake. It should be ISC. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Ulf Magnusson <ulfalizer@gmail.com>
-
-
由 Albert ARIBAUD 提交于
-
- 17 9月, 2014 22 次提交
-
-
由 Tom Rini 提交于
At the high level, the problem is that we set gd multiple times (and still do, even after the commit we're reverting). We set important parts of gd to the copy which is not above stack but rather in the data section. For the release, we're going to revert this change and for the next release we shall correct things to only, really, set gd once to an appropriate location and ensure that comments about it are correct too. This reverts commit f0c3a6c4. Acked-by: NAlbert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
We do not have to distinguish CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI from CONFIG_TARGET_VEXPRESS_AEMV8A. Rename the former to the latter. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NSteve Rae <srae@broadcom.com> Cc: David Feng <fenghua@phytium.com.cn>
-
由 Gerhard Sittig 提交于
When a DNS query is sent out, the ethernet packet can get directed to the MAC address of a server that was communicated to before. This is wrong when the previously stored MAC address corresponds to a different server's IP address, i.e. when the IP address of the previous and the current communication are different. The error can get reproduced by running a sequence of e.g. a TFTP download and a DNS query, where the TFTP and DNS servers reside on individual machines. The fix is to clear the server's MAC address that might be left from a previous operation, and to fetch the peer's MAC address in a new ARP lookup, before the DNS query is sent. This is the approach taken in other network services, like 8e52533d ("net: tftpsrv: Get correct client MAC address"). Reported-by: NDirk Zimoch <dirk.zimoch@psi.ch> Signed-off-by: NGerhard Sittig <gsi@denx.de>
-
由 Masahiro Yamada 提交于
For the SPL configuration, "make <dir>/<target>" is used. Here, <dir> is either "spl" or "tpl" <target> is one of "config", "menuconfig", "xconfig", etc. This commit adds two checks: [1] If <dir> is given an unsupported subimage, the configuration should error out like this: $ make qpl/menuconfig *** *** "make qpl/menuconfig" is not supported. *** [2] Make sure that "CONFIG_SPL" is enabled in the ".config" before running "make spl/menuconfig. Otherwise, the SPL image is not built at all. Having "spl/.config" makes no sense. In such a case, the configuration should exit with a message: $ make spl/menuconfig *** *** Create ".config" with "CONFIG_SPL" enabled *** before "make spl/menuconfig". *** Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This driver was upstreamed without an SMSC copyright, even thought it seems that SMSC was the original author. See the kernel version for a code comparison: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2f7ca802bdae2ca41022618391c70c2876d92190 It's not clear who actually moved this code, or whether the kernel was the original source, or somewhere else, but it probably should still have the SMSC copyright. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 maxin.john@enea.com 提交于
This patch fixes the build error for CONFIG_CMD_MTDPARTS_SPREAD Signed-off-by: NMaxin B. John <maxin.john@enea.com>
-
由 Khoronzhuk, Ivan 提交于
After mtd was synced with Linux 3.14 (ff94bc40) the number of parameters for write_page function of nand_chip was changed. The additional two var were needed for subpage write. As keystone has no supbage write they are not needed. So correct only function definition by upgrading it's parameter list. That helps to get ritd of compilation warning. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Masahiro Yamada 提交于
gd->fdt_blob is used for FDT control of U-Boot. If CONFIG_OF_CONTROL is not defined, it is useless. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Files added $(extra-) are removed by "make clean". Besides, wildcard "*.srec *.bin" is simpler. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This commit is a backport from Linux Kernel, commit 9d5db8949f1ecf4019785b04d8986835d3c0e99e, written by me. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
When a non-existing defconfig is specified, display an easy-to-understand message (fake the error message on Linux Kernel): $ make foo_defconfig *** *** Can't find default configuration "confis/foo_defconfig"! *** Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NStephen Warren <swarren@nvidia.com>
-
由 Gabriel Huau 提交于
This was breaking the build for some boards: MPC8536DS MPC8536DS_36BIT MPC8536DS_SDCARD MPC8536DS_SPIFLASH qemu-ppce500 Include only these features for some PPC boards if the configuration for MultiProcessor is enabled. Signed-off-by: NGabriel Huau <contact@huau-gabriel.fr> Cc: Tom Rini <trini@ti.com> Cc: York Sun <yorksun@freescale.com> Acked-by: NYork Sun <yorksun@freescale.com>
-
由 Masahiro Yamada 提交于
Since 3ff291f3 (kconfig: convert Kconfig helper script into a shell script), "make config" is not working because of a missing '$' before '(Q)'. Besides, "make config" should be invoked via scripts/multiconfig.sh to avoid a warning message: Kconfig:11:warning: environment variable KCONFIG_OBJDIR undefined Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Since 3ff291f3 (kconfig: convert Kconfig helper script into a shell script), "make savedefconfig" of TPL boards has not been working. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.o.rg Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Commit 3ff291f3 (kconfig: convert Kconfig helper script into a shell script) introduced another regression. Shell usually handles whitespaces as separators, so "make saveconfig" outputs # CONFIG_FOO is not set into: # CONFIG_FOO is not set Whitespaces should not be treated as separators here. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Commit 3ff291f3 (kconfig: convert Kconfig helper script into a shell script) introduced a minor regression. make alldefconfig; make savedefconfig should create an empty 'defconfig'. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Now GCC_VERSION is defined in include/linux/compiler-gcc.h (with a little different definition). Use it and delete the one in examples/standlone/stub.c. This should work on Clang too because __GNUC__, __GNUC_MINOR__, __GNUC_PATCHLEVEL__ are also defined on Clang. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
-
由 Masahiro Yamada 提交于
Copy them from Linux v3.16 tag. My main motivation of this commit is to add compiler-clang.h. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
-
由 Steve Rae 提交于
update to provide usable implementation to U-Boot Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Steve Rae 提交于
- port dprintf() to debug() - update formatting Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Steve Rae 提交于
- remove unnecessary functions Signed-off-by: NSteve Rae <srae@broadcom.com>
-