The DDR SDRAM initialization code has not been mainlined yet, but
U-Boot proper should work.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Desktop Management Interface (DMI) is not supported by U-Boot now.
Add it to the TODO list.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Document porting considerations for Intel Quark based board,
including MRC parameters and PCIe initialization.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NSimon Glass <sjg@chromium.org>

This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NStefano Babic <sbabic@denx.de>

This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

It's easier to Cc him on ARC-releated patches.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

CONFIG_X86_OPTION_ROM_ADDR has been renamed to CONFIG_VGA_BIOS_ADDR.
Update the doc to refer to the new name.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Tested-by: NSimon Glass <sjg@chromium.org>

Documentation file for DFU extension. With this functionality it is now
possible to transfer FIT images with firmware updates via TFTP and use
DFU backend for storing them.
Signed-off-by: NLukasz Majewski <l.majewski@majess.pl>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>

The default config includes base.menu, not linux.list
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>

It is easier to paste these into the command line if they are a single
common. Use line continuation instead of separate lines.
Signed-off-by: NSimon Glass <sjg@chromium.org>

MMC support works now, so it can be dropped from the todo
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSimon Glass <sjg@chromium.org>

Instead of creating a rockchip SPL SD card image with 32KB of zeros
which can be written to the start of an SD card, create the images with
only the useful data that should be written to an offset of 32KB on the
SD card.

The first 32 kilobytes aren't needed for bootup and only serve as
convenient way of accidentally obliterating your partition table.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSimon Glass <sjg@chromium.org>

The Radxa Rock pro board is rk3188 based and thus won't work with U-Boot
built for RK3288. Change the documentation to refer to the intended
board, the Radxa Rock 2, which is an RK3288-based design very similar to
the firefly
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add a few notes on how to try out the Rockchip support so far.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Bring in required device tree files from Linux. Since mainline Linux is
somewhat behind, use the files from the Chromium tree. We can re-sync once
further code is acccepted upstream.
Signed-off-by: NSimon Glass <sjg@chromium.org>

These have not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Dan Malek <dan@embeddedalley.com>

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stefan Roese <sr@denx.de>

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stefan Roese <sr@denx.de>

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stefan Roese <sr@denx.de>

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Remove CONFIG_LWMON5 references.
(Also, remove undefined CONFIG_WD_MAX_RATE while I am here.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stefan Roese <sr@denx.de>

These have not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Tolunay Orkun <torkun@nextio.com>

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stefan Roese <sr@denx.de>

Extend the documentation of the fec_mxc configuration by describing its
ability to read the ethaddr MAC address from the SoC eFuses.

Also add an example how to program the fuses for an imx5 to clarify the
byte order.

Cc: Stefano Babic <sbabic at denx.de>
Cc: Marek Vasut <marex at denx.de>
Signed-off-by: Olaf Mandel <o.mandel at menlosystems.com>

Device Tree really improves code maintainability and is now
available for SPL too.

This is the state-of-the-art implementation in U-boot.

The board files (platform data) are no longer needed.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

	Remove ag101 and ag102 support
Signed-off-by: NKun-Hua Huang <kunhua@andestech.com>

	Add nds32 ag101p generic board support.
Signed-off-by: NKun-Hua Huang <kunhua@andestech.com>

Document how pci devices are bound to device drivers.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NSimon Glass <sjg@chromium.org>

This is incorrect since we require the -m parameter to the microcode tool.
Update the two examples to show this.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

The doc has a misleading 'make menuconfig' when building the EFI
application and payload. Clarify this and also update information
on test with QEMU.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NSimon Glass <sjg@chromium.org>

With recent EFI support, the entry point address of coreboot payload
was changed. Now we update the address to use _x86boot_start, which
is the same one for EFI.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NMarek Vasut <marex@denx.de>

It is a bit tedious to figure out the interrupt configuration for a new
x86 platform. Add a script which can do this, based on the output of
'pci long'. This may be helpful in some cases.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Tested-by: NBin Meng <bmeng.cn@gmail.com>

* Explicitly list the targets supported in each section of the
instructions from the x86 README.

* Drop references to 'raw mode', in favor of 'bare mode'.
Signed-off-by: NIgor Stoppa <igor.stoppa@intel.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Allow for configuration of FSP UPD from the device tree which will
override any settings which the FSP was built with itself.

Modify the MinnowMax and BayleyBay boards to transfer sensible UPD
settings from the Intel FSPv4 Gold release to the respective dts files,
with the condition that the memory-down parameters for MinnowMax are
also used.
Signed-off-by: NAndrew Bradford <andrew.bradford@kodakalaris.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Tested-by: NBin Meng <bmeng.cn@gmail.com>
Removed fsp,mrc-debug-msg and fsp,enable-xhci for minnowmax, bayleybay
Fixed lines >80col
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add support for making the visual area of the framebuffer smaller and
drawing a black border around it. This is intended for use with
overscanning monitors (esp. with composite video out), to avoid part
of the picture being invisible.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>
Acked-by: NAnatolij Gustschin <agust@denx.de>

We do not need that "regulator-name" property must be provided in dts.
If "regulator-name" property is not provided in dts, node name
will chosen for settings '.name' field of uc_pdata.
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>