- 08 2月, 2021 40 次提交
-
-
由 Biwen Li 提交于
Enable CMD_GPIO for board lx2160ardb Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable DM_GPIO and CMD_GPIO for board ls1088ardb Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable DM_GPIO and CMD_GPIO for board ls1088aqds Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for board ls2088aqds Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable DM_GPIO and CMD_GPIO for board ls2088ardb Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for board ls1046aqds Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for board ls1046ardb Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for board ls1043ardb Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for board ls1043aqds Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for board ls1028ardb Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for board ls1028aqds Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for ls1021atwr Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for board ls1021aqds Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for ls1012ardb Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CMD_GPIO for ls1012afrwy Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CONFIG_MPC8XXX_GPIO for board ls1021aqds Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CONFIG_MPC8XXX_GPIO for board ls1021atwr Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable MPC8XXX_GPIO for SoC LS1046A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CONFIG_MPC8XXX_GPIO for SoC LX2160A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CONFIG_MPC8XXX_GPIO for LS208xA Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CONFIG_MPC8XXX_GPIO for LS1088A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CONFIG_MPC8XXX_GPIO for SoC LS1028A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CONFIG_MPC8XXX_GPIO for SoC LS1043A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable CONFIG_MPC8XXX_GPIO for SoC LS1012A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Add gpio node for SoC LS208xA Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Add gpio node for SoC LS1088A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Add gpio node for SoC LS1046A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Add gpio node for SoC LS1043A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Add gpio node for SoC LS1028A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Add gpio node for SoC LS1012A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Add gpio node for SoC LS1021A Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Update gpio driver to use same logic for big-endian and little-endian Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Hou Zhiqiang 提交于
Drop the CONFIG_VIDEO to fix the following build warning. ===================== WARNING ====================== This board does not use CONFIG_DM_VIDEO Please update the board to use CONFIG_DM_VIDEO before the v2019.07 release. UPD include/generated/dt.h Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. UPD include/generated/timestamp_autogenerated.h ==================================================== Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Jain 提交于
Update data type of '1' to '1ull' in below assignment size = 1ull << sizebit; to fix incorrect assignment issue. e.g: when sizebit was 31, 0x80000000 got sign extended to 0xffffffff_80000000 Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reported-by: NDean Saridakis <dean.saridakis@baesystems.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Hou Zhiqiang 提交于
Enable the I-Cache to speed up the boot time, especailly for the NOR boot, currently it takes about 15 seconds from power up to the U-Boot prompt, and with the I-Cache enabled it only takes around 2.5 seconds. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Aleksandar Gerasimovski 提交于
Cleanup, move the declarations to keymile/common.h instead declaring them per-board config.h Signed-off-by: NAleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Hou Zhiqiang 提交于
LX2162A is not like LX2160A which has different PCIe controller in rev1 and rev2 silicon. It supports only one configuration of PCIe controller, which is same as LS2088A. So update PCIe compatible string same as LS2088A. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NWasim Khan <wasim.khan@nxp.com> Tested-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Hou Zhiqiang 提交于
This patch moves the SVR definitions to a new svr.h for Layerscape armv7 and armv8 platforms respectively, so that the PCIe driver can reuse them. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Mathew McBride 提交于
The LS1088 requires the same QUADSPI_QURIK_BASE_INTERNAL workaround as the LS208x and also has a 64 byte TX buffer. With the previous settings SPI-NAND reads over AHB were corrupted. Fixes: 91afd36f ("spi: Transform the FSL QuadSPI driver to use the SPI MEM API") Signed-off-by: NMathew McBride <matt@traverse.com.au> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Mathew McBride 提交于
Adapted from kernel commit b0177aca7aea From: Michael Walle <michael@walle.cc> Make use of a core helper to ensure the desired width is respected when calling spi-mem operators. Otherwise only the SPI controller will be matched with the flash chip, which might lead to wrong widths. Also consider the width specified by the user in the device tree. Fixes: 91afd36f ("spi: Add a driver for the Freescale/NXP QuadSPI controller") Signed-off-by: NMichael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200114154613.8195-1-michael@walle.ccSigned-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: Mathew McBride <matt@traverse.com.au> [adapt for U-Boot] Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-