- 10 3月, 2017 1 次提交
-
-
由 Tom Rini 提交于
In some cases this is absolutely required, so select this for some secure features. This also requires migration of RSA_FREESCALE_EXP Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Sumit Garg <sumit.garg@nxp.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Feng Li <feng.li_2@nxp.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Mingkai Hu <Mingkai.Hu@freescale.com> Cc: York Sun <york.sun@nxp.com> Cc: Saksham Jain <saksham.jain@nxp.freescale.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 2月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
For the memory footprint reason, the Boot ROM can not load the ARM Trusted Firmware BL1 directly when Trusted Board Boot is enabled. The second stage loader is Socionext's own firmware, so rename it for clarification. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 20 2月, 2017 6 次提交
-
-
由 Markus Niebel 提交于
Signed-off-by: NMarkus Niebel <Markus.Niebel@tq-group.com>
-
由 Markus Niebel 提交于
need to add before div in mmc update scripts. Otherwise we could write one block more ba acident Signed-off-by: NMarkus Niebel <Markus.Niebel@tq-group.com>
-
由 Markus Niebel 提交于
Signed-off-by: NMarkus Niebel <Markus.Niebel@tq-group.com>
-
由 Markus Niebel 提交于
there was a double bracketed var ref. fix this. Signed-off-by: NMarkus Niebel <Markus.Niebel@tq-group.com>
-
由 Markus Niebel 提交于
Playing with USB-to-Ethernet dongles it turns out, that these will not work with special settings Signed-off-by: NMarkus Niebel <Markus.Niebel@tq-group.com>
-
由 Markus Niebel 提交于
depending on the use case different CMA sizes are needed for linux. Add env var to enable passing CMA size via kernel command line Signed-off-by: NMarkus Niebel <Markus.Niebel@tq-group.com>
-
- 19 2月, 2017 2 次提交
-
-
由 Peter Robinson 提交于
The fdt_addr and ramdisk_addr_r are currently both defined to 0x83000000 and that's not going to work well for anyone. Move the ramdisk_addr_r to 0x84000000. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
-
由 Peter Robinson 提交于
Standard boot processes including distro boot generally expect the default console to be defined. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Tested-by: NBreno Lima <breno.lima@nxp.com>
-
- 18 2月, 2017 2 次提交
-
-
由 Tom Rini 提交于
This is no longer used anywhere. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Dalon Westergreen 提交于
Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig. Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated. Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
-
- 13 2月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 10 2月, 2017 4 次提交
-
-
由 Mike Looijmans 提交于
The kernel partition in QSPI is 0x440000 large, not 0x400000. Fix this in the environment, otherwise the kernel will fail to boot if it occupies more space. Signed-off-by: NMike Looijmans <mike.looijmans@topic.nl> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Eddie Cai 提交于
Miniarm is the internal project code. Now it is officially named Tinker board. So rename it. Signed-off-by: NEddie Cai <eddie.cai@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Jacob Chen 提交于
Keep it same with other boards otherwise i have to write special script for it.. Signed-off-by: NJacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Jacob Chen 提交于
To reduce redundant code. Signed-off-by: NJacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 09 2月, 2017 4 次提交
-
-
由 Lars Poeschel 提交于
Albeit it's a typo, neither CONGIG_CMD_STORAGE nor CONFIG_CMD_STORAGE are used anywhere, so remove the define from the board configs. Signed-off-by: NLars Poeschel <poeschel@lemonage.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Masahiro Yamada 提交于
CONFIG_CMD_ZIP is not defined by any board. I am moving CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family. I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP" is better for this platform. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NRyan Harkin <ryan.harkin@linaro.org> Tested-by: NRyan Harkin <ryan.harkin@linaro.org>
-
由 Phil Edworthy 提交于
CONFIG_SPL_STACK_SIZE is not a config option, so rename it. Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
-
由 Emmanuel Vadot 提交于
Now that we have a Kconfig for the API, convert the two boards that are using this to Kconfig and remove CONFIG_API from the whitelist. Signed-off-by: NEmmanuel Vadot <manu@bidouilliste.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 07 2月, 2017 2 次提交
-
-
由 Bin Meng 提交于
If SPL is used we want to use the generic SPL framework and boot from SPI via a board-specific means. Add these options to the board config file. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
If SPL is used we want to use the generic SPL framework and boot from SPI via a board-specific means. Add these options to the board config file. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 04 2月, 2017 3 次提交
-
-
由 Prabhakar Kushwaha 提交于
Enable ELBC from Kconfig. Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Prabhakar Kushwaha 提交于
Enable IFC from Kconfig. Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Prabhakar Kushwaha 提交于
PPA binary needs to be relocated on secure DDR, hence marking out a portion of DDR as secure if CONFIG_SYS_MEM_RESERVE_SECURE flag is set Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: NAbhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 31 1月, 2017 2 次提交
-
-
由 Masahiro Yamada 提交于
Make the naming scheme consistent; all SDHCI-base drivers prefixed with CONFIG_MMC_SDHCI_. While we are here, add "depends on ARCH_ZYNQ || ARCH_ZYNQMP". Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC. Let's create an entry for "config GENERIC_MMC" with "default MMC", then convert all macro defines in headers to Kconfig. Almost all of the defines will go away. I see only two exceptions: configs/blanche_defconfig configs/sandbox_noblk_defconfig They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something might be wrong with these two boards, so should be checked later. Anyway, this is the output of the moveconfig tool. This commit was created as follows: [1] create a config entry in drivers/mmc/Kconfig [2] tools/moveconfig.py -r HEAD GENERIC_MMC [3] manual clean-up of garbage comments in doc/README.* and include/configs/*.h Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 30 1月, 2017 1 次提交
-
-
由 Lukasz Majewski 提交于
This patch provides u-boot support for Liebherr (LWN) mccmon6 board. Signed-off-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NStefano Babic <sbabic@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 29 1月, 2017 11 次提交
-
-
由 Masahiro Yamada 提交于
Currently, SPL (u-boot-spl.bin) and U-Boot (u-boot.bin) are stored in non-volatile devices, and some environments are defined to update the images easily. When ARM Trusted Firmware is fully used, SPL is not used. U-Boot proper is contained as BL33 into FIP (Firmware Image Package), which is standard container used by ATF. Allow to use it. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The Boot ROM supports authentication feature to prevent malformed software from being run on products. The signature is added at the tail of the second stage loader (= SPL in U-boot terminology). The size of the second stage loader was 64KB, and it was consistent across SoCs. The situation changed when LD20 SoC appeared; it loads 80KB second stage loader, and it is the only exception. Currently, CONFIG_SPL_PAD_TO is set to 64KB and U-Boot proper is loaded from the 64KB offset of non-volatile devices. This means the signature of LD20 SoC (located at 80KB offset) corrupts the U-Boot proper image. Let's move the U-Boot proper image to 128KB offset. It uses 48KB for nothing but padding, and we could actually locate the U-Boot proper at 80KB offset. However, the power of 2 generally seems a better choice for the offset address. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
When ARM Trusted Firmware is used, bl1.bin + fip.bin exceeds 512KB, so the boot image and the current environment area will overlap. Move the environment storage to 1MB offset. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The boot_ramdisk_high() checks the environment "initrd_high" and, if it is set to (ulong)-1, skip the initrd relocation. This is useful for faster booting when we know the initrd is already located within the reach of the kernel. Change "norboot" to copy images in order to make it work without depending on the automatic relocation. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The ARM64 Linux raw image now amounts to 15MB and it is getting bigger and bigger. Using Image.gz saves about 8MB. The cost of unzip is smaller than what we get by saving the kernel loading from non-volatile devices. The ARM32 Linux still uses zImage, a self-decompressor image, so it should not be affected. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
For clarification, move CONFIG symbols that affect SPL building into a single place. Drop #ifdef CONFIG_SPL ... #endif since it is harmless to define CONFIG_SPL_... during U-Boot proper building. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
U-Boot needs to set up available memory area(s) in dram_init() and dram_init_banksize(). It is platform-dependent how to detect the memory banks. Currently, UniPhier adopts the memory banks _alleged_ by DT. This is based on the assumption that users bind a correct DT in their build process. Come to think of it, the DRAM controller has already been set up before U-Boot is entered (because U-Boot runs on DRAM). So, the DRAM controller setup register seems a more reliable source of any information about DRAM stuff. The DRAM banks are initialized by preliminary firmware (SPL, ARM Trusted Firmware BL2, or whatever), so this means the source of the reliability is shifted from Device Tree to such early-stage firmware. However, if the DRAM controller is wrongly configured, the system will crash. If your system is running, the DRAM setup register is very likely to provide the correct DRAM mapping. Decode the SG_MEMCONF register to get the available DRAM banks. The dram_init() and dram_init_banksize() need similar decoding. It would be nice if dram_init_banksize() could reuse the outcome of dram_init(), but global variables are unavailable at this stage because the .bss section is available only after the relocation. As a result, SG_MEMCONF must be checked twice, but a new helper uniphier_memconf_decode() will help to avoid code duplication. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Michael Kurz 提交于
This patch enables support for the smsc phy on the stm32f746-disco board. Signed-off-by: NMichael Kurz <michi.kurz@gmail.com> Acked-by: NVikas MANOCHA <vikas.manocha@st.com> Series-changes 3: - Add Acked-by tag to 'enable support for smsc phy on...'
-
由 Michael Kurz 提交于
This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: NMichael Kurz <michi.kurz@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Marcin Niestroj 提交于
chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: NMarcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 maxims@google.com 提交于
ast2500 Eval Board device tree and board specific configuration. Reviewed-by: NSimon Glass <sjg@chromium.org>
-