- 06 6月, 2015 1 次提交
-
-
由 Hans de Goede 提交于
Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default rather then needing to have this in every sunxi defconfig file. This also fixes the Merrii_A80_Optimus defconfig no longer building. Cc: Maxin B. John <maxin.john@enea.com> Reported-by: NMaxin B. John <maxin.john@enea.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
- 01 6月, 2015 2 次提交
-
-
由 Joe Hershberger 提交于
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
- 13 5月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
In order to reduce merge conflicts and to maintain the simplest possible defconfig files, we should be using the savedefconfig feature of Kconfig every time a new feature is added. This keeps the defconfig settings to a minimum (only those things not default) and keeps them in the same order as the Kconfig options. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
-
- 04 5月, 2015 2 次提交
-
-
由 Hans de Goede 提交于
Now that we've everything prepared for it remove the DM settings from the defconfig(s) and simply always set them for sunxi. This makes all sunxi boards allways use the driver model for gpios and ethernet, and allows us to move over more bits to the driver-model without the need to introduce #ifdef-ery for boards which are not yet using DM. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
This is a preparation patch for switching all sunxi boards over to using the driver model. Note that rather then defining both CONFIG_DEFAULT_DEVICE_TREE (for u-boot) and CONFIG_FDTFILE (for the kernel), this commit simply replaces all CONFIG_FDTFILE defconfig settings with CONFIG_DEFAULT_DEVICE_TREE and uses CONFIG_DEFAULT_DEVICE_TREE for setting the default fdtfile env value in sunxi-common.h . Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
- 19 4月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Move this to Kconfig and clean up board config files that use it. Also rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists in drivers/net/Kconfig. Signed-off-by: NSimon Glass <sjg@chromium.org> Version 1: Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 16 3月, 2015 1 次提交
-
-
由 Masahiro Yamada 提交于
Since commit e02ee254 (kconfig: switch to single .config configuration), the prefixes in defconfig files such as "+S:", "+ST:", etc., are meaningless. This commit was generated by the following command: find configs -name '*_defconfig' | xargs sed -i 's/^+*S*T*://' Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 02 2月, 2015 1 次提交
-
-
由 Adam Sampson 提交于
This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in, HDMI, SATA, 5V power for SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. Like the BananaPi, this board needs GMAC_TX_DELAY set to 3 in order for GMAC to work reliably at gigabit speeds. For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_NanoSigned-off-by: NAdam Sampson <ats@offog.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-