- 24 7月, 2009 2 次提交
-
-
由 Mike Frysinger 提交于
By including autoconf.mk before config.mk, all top level files can use any config options it sets up (like <arch>_config.mk) or the Makefile itself without being forced to use lazy evaluation.
-
由 Mike Frysinger 提交于
The top build system sets up HOSTCFLAGS a bit and exports it, but other places use HOST_CFLAGS instead. Unify the two as HOSTCFLAGS so that the values stay in sync. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 23 7月, 2009 1 次提交
-
-
由 Prafulla Wadaskar 提交于
This is Marvell's 88F6281_A0 based reference design board This patch is tested for- 1. Boot from DRAM/NAND flash/NFS 2. File transfer using tftp and loadb 3. NAND flash read/write/erase Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 21 7月, 2009 2 次提交
-
-
由 Peter Tyser 提交于
Also add a rule to remove demo.bin which was previously leftover after a "make clean" Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
The current files in examples are all standalone application examples, so put them in their own subdirectory for organizational purposes Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 20 7月, 2009 1 次提交
-
-
由 Mike Frysinger 提交于
Each arch should handle setting a proper default CROSS_COMPILE value in their own config.mk file rather than having to maintain a large ugly list in the Makefile. By using conditional assignment, we don't have to worry about the variable already being set (env/cmdline/etc...). The common config.mk file takes care of exporting CROSS_COMPILE already, and while a few variables (toolchain ones) utilize CROSS_COMPILE before including the arch config.mk, they do so with deferred assignment. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 19 7月, 2009 4 次提交
-
-
由 Wolfgang Denk 提交于
Commit 0a87dd90 that was supposed to fix out-of-tree building for the pcm030 board was unfortunately incomplete. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Prafulla Wadaskar 提交于
This is Marvell's 88F6281_A0 based custom board developed for wireless access point product This patch is tested for- 1. Boot from DRAM/SPI flash/NFS 2. File transfer using tftp and loadb 3. SPI flash read/write/erase 4. Booting Linux kernel and RFS from SPI flash 5. Boot from USB supported Reviewed-by: NRonen Shitrit <rshitrit@marvell.com> Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Prafulla Wadaskar 提交于
Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support This patch is tested for- 1. Boot from DRAM/NAND flash 2. File transfer using tftp 3. NAND flash read/write/erase 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for kernel need 6. Boot from USB supported Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Wolfgang Denk 提交于
Commit c9969947, which added support for the pcm030 board (aka phyCORE-MPC5200B-tiny), broke out-of-tree building. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 18 7月, 2009 1 次提交
-
-
At the first run of make we generate the autoconf.mk and autoconf.mk.dep if not already the case and we currently include only to .dep In order to use these autogenerated values we need to include it also even if it's included in config.mk but it's done before their generation Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 17 7月, 2009 1 次提交
-
-
由 Scott Wood 提交于
Legacy NAND had been scheduled for removal. Any boards that use this were already not building in the previous release due to an #error. The disk on chip code in common/cmd_doc.c relies on legacy NAND, and it has also been removed. There is newer disk on chip code in drivers/mtd/nand; someone with access to hardware and sufficient time and motivation can try to get that working, but for now disk on chip is not supported. Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 12 7月, 2009 2 次提交
-
-
由 Sedji Gaouaou 提交于
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a faster clock speed: 266/133MHz. Signed-off-by: NSedji Gaouaou <sedji.gaouaou@atmel.com>
-
由 Sedji Gaouaou 提交于
AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: NSedji Gaouaou <sedji.gaouaou@atmel.com>
-
- 11 7月, 2009 4 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
ESPT-Giga is SH7763-based reference board. Board support is relatively sparse, presently supporting serial, gigabit ethernet, USB host, and MTD. More information (in Japanese) available at: http://www.cente.jp/product/cente_hard/ESPT-Giga.htmlSigned-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Peter Tyser 提交于
* Remove symlinking of files located outside api_examples/ * Auto generate dependencies for files located outside api_examples/ * Update names of variables to be similar to those in tools/Makefile * Fix out of tree build error Dependencies are calculated for all files in the SRCS variable. Previously, the SRCS variable contained files which were symlinked into the api_examples/ directory. These symlinked files did not exist when dependencies were calculated when building out of tree. This resulted in errors such as: make[1]: *** No rule to make target `/work/wd/tmp-ppc/api_examples/.depend', needed by `_depend'. Stop. make[1]: Leaving directory `/home/wd/git/u-boot/work/api_examples' make: *** [depend] Error 2 Since symlinked source files are no longer used, this bug no longer exists. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NRafal Jaworowski <raj@semihalf.com>
-
由 Jon Smirl 提交于
Add support for the Phytec phyCORE-MPC5200B-tiny. Code originally from Pengutronix.de. Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on Timer 0/1 Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Mike Frysinger 提交于
The current kallsyms code is using \\0 to escape the backslash in the awk code, but the shell too needs escaping. This way we make sure gcc is passed the \0. Then gcc itself will consume this as an octal, so we have to use 000 so gcc will create the final NUL. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 08 7月, 2009 2 次提交
-
-
currently we need to sync the linker script enty and TEXT_BASE manualy and the reloc_dst is based on it instead provide it now from the ldflags tested on r2dplus Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 07 7月, 2009 6 次提交
-
-
由 Magnus Lilja 提交于
Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Alessandro Rubini 提交于
The evaluation kit has both Nand and OneNand, both drivers are there and the two configurations only select a different default for the jffs partition. This adds the OneNand driver and cleans up storage. Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
-
由 Alessandro Rubini 提交于
This is an error in my side in the initial submission: nobody calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead. Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
-
由 Stefano Babic 提交于
The Polaris board is based on the TrizepsIV module of Keith & Koep (http://www.keith-koep.com). Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Daniel Gorsulowski 提交于
This patch adds support for esd gmbh MEESC board. The MEESC is based on an Atmel AT91SAM9263 SoC. Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
-
由 Magnus Lilja 提交于
Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board). This patch assumes that some other program performs the actual NAND boot. Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com> Acked-by: NFabio Estevam <fabioestevam@yahoo.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 02 7月, 2009 1 次提交
-
-
由 Peter Tyser 提交于
Initial support for Extreme Engineering Solutions XPedite5170 - a MPC8640-based 3U VPX single board computer with a PMC/XMC site. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 23 6月, 2009 1 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NPeter Pearse <peter.pearse@arm.com>
-
- 21 6月, 2009 2 次提交
-
-
this will allow you to store use it for the env and to boot directly U-Boot from Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Ilko Iliev 提交于
The PM9261 board is based on the AT91SAM9261-EK board. Here is the page on Ronetix website: http://www.ronetix.at/starter_kit_9261.htmlSigned-off-by: NIlko Iliev <iliev@ronetix.at> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 16 6月, 2009 1 次提交
-
-
由 Mike Frysinger 提交于
The way the ALL variable is used allows for config.mk's to add more targets themselves without having to clutter up the top level Makefile. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 15 6月, 2009 9 次提交
-
-
由 Mike Frysinger 提交于
All the Blackfin linker scripts were duplicated across the board dirs with no difference save from the semi-often used ENV_IS_EMBEDDED option. So unify all of them in the lib_blackfin/ dir and for the few boards that need to embedded the environment directly, add a LDS_BOARD_TEXT define for them to customize via their board config file. This is much simpler than forcing them to duplicate the rest of the linker script. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Hoan Hoang 提交于
Signed-off-by: NHoan Hoang <hnhoan@i-syst.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-