This patch add mmc and sd support for Mediatek MT7622 SoCs
Signed-off-by: NSam Shih <sam.shih@mediatek.com>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

This patch add power domain support for Mediatek MT7622 SoCs
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NSam Shih <sam.shih@mediatek.com>

This patch fix clock-rate overflow problem in mediatek
clock driver common part.
Signed-off-by: NSam Shih <sam.shih@mediatek.com>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

This patch add clock driver for MediaTek MT7622 SoC.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NSam Shih <sam.shih@mediatek.com>

Due to the pinctrl hardware of MT7622 is difference from others
SoC which using the common part of mediatek pinctrl.
So we need to modify the common part of mediatek pinctrl.
Signed-off-by: NSam Shih <sam.shih@mediatek.com>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

This patch add Pinctrl driver for MediaTek MT7622 SoC.
Signed-off-by: NSam Shih <sam.shih@mediatek.com>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

Add support for MediaTek MT7622 SoC. This include the file
that will initialize the SoC after boot and its device tree.
Signed-off-by: NSam Shih <sam.shih@mediatek.com>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

If make the ref clock optional, no need refer to fixed-clock when
the ref clock is always on or comes from oscillator directly.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

No need check -ENOSYS anymore after add dummy_enable() for
fixed-clock.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

This is used to avoid clk_enable() return -ENOSYS.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

Sometimes we may need get (optional) clock without a device,
that means use ofnode.
e.g. when the phy node has subnode, and there is no device created
for subnode, in this case, we need these new APIs to get subnode's
clock.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

Add valid check for clk->dev, it's useful when get optional
clock even when the clk point is valid, but its dev will be
NULL.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

If skip all return error number, it may skip some real error cases,
so only skip the error when the clock is not provided in DTS
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

The SSUSB IP's clocks come from ssusbsys module on mt7629,
so add its driver
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>

This adds a general board file based on MT8512 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8512 eMMC board.
Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>

For CMD21 tuning data, the 128/64 bytes data may coming in very
short time, before msdc_start_data(), the read data has already
come, in this case, clear MSDC_INT will cause the interrupt disappear
and lead to the thread hang.

the solution is just clear all interrupts before command was sent.
Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>

This patch adds mmc support for MediaTek MT8512/MT8110 SoCs.
MT8512/MT8110 SoCs puts the tune register at top layer, so
need add new code to support it.
Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>

Add Pinctrl driver for MediaTek MT8512 SoC.
Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>

Add configurable pcw_chg_reg/ibits/fmin to mtk_pll to support mt8512

Add new set_clr_upd mux type and related operation to
mtk common clock driver to support mt8512

Add clock driver for MediaTek MT8512 SoC, include topckgen,
apmixedsys and infracfg support.
Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>

Add support for MediaTek MT8512 SoC. This include the file
that will initialize the SoC after boot and its device tree.
Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>

Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change
it to his home mail instead.
Signed-off-by: NSam Protsenko <joe.skb7@gmail.com>

When no partition table is found, users should be warned so.
Warning that no device is available in this case could be misleading,
especially as it is the same error when no device is selected.
Signed-off-by: NAlexandre Besnard <alexandre.besnard@softathome.com>

The device tree compiler expects that a node with a unit-address has a reg
property.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Some features implicitly depended on MALLOC_F and OF_LIBFDT and would
fail at link-time if these features were not enabled.
Signed-off-by: NSean Anderson <seanga2@gmail.com>

asm-generic/sections.h references ulong but does not include
linux/types.h
Signed-off-by: NSean Anderson <seanga2@gmail.com>

Add stub for dma_memcpy() and dma_get_device when CONFIG_DMA is
disabled. This avoids ifdefs in driver code using DMA APIs
Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use
macros such as CONFIG_IS_ENABLED() that allow conditional compilation of
code for SPL and U-Boot.
Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Pull request for UEFI sub-system for efi-2020-04-rc1-2

Bug fixes for the UEFI sub-system are provided:

* imply VIDEO_ANSI for correct cursor positioning and colors
* fix issues in the UEFI block device driver
* add missing documentation

-----------------------------------
- imx8:
	add capricorn giedi deneb boards
- imx6:
	fixed fow wandboard
- imx7: DM_ETHER for pico-imx7d
- fsl_esdhc_imx: add broken-cd property
- New SOC: IMXRT10xx

Travis:
	https://travis-ci.org/sbabic/u-boot-imx/builds/637126531

- Important bugfix for some Tegra platforms

UEFI programs like GRUB make change terminal colors which requires support
for ANSI escape sequences.

Let CONFIG_EFI_LOADER=y imply CONFIG_VIDEO_ANSI.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Use the correct printf codes for the debug output in efi_uc_start() and
efi_uc_stop().
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Use the correct protocol in efi_uc_stop() when detaching the driver from
the controller.

Change the block IO unit test for the block device driver to throw an error
instead of a todo if teardown fails.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

For automating testing we should be able to power off the test system.
The implementation of EFI_RESET_SHUTDOWN requires the do_poweroff()
function which is only available if CONFIG_CMD_POWEROFF=y.

Enable CONFIG_CMD_POWEROFF if PSCI reset is available.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Provide a sober description of how control can be returned by a UEFI
binary.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Add the missing Sphinx documentation.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This commit adds board support for i.MXRT1050-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT105x processor family.

More information about this board can be found here:
https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK

The initial supported/tested devices include:
- Debug serial
- SD
Signed-off-by: NGiulio Benetti <giulio.benetti@benettiengineering.com>

Add i.IMXRT family basic support.
Signed-off-by: NGiulio Benetti <giulio.benetti@benettiengineering.com>