DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Boards should convert to DM_VIDEO if they need video console
support.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Erik van Luijk <evanluijk@interact.nl>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Alison Wang <alison.wang@nxp.com>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Highlights:
- Fix a problem with the bootm overlap tests
- Remove duplicated code in fatwrite
- Cleanup our current "misc" command code and add a new one for misc
  class devices.
- Various GPIO fixes

Add dummy helper to enabling the header could be included when
DM REGULATOR not enabled.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Add clk bulk for nop-phy driver.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

It doesn't need to consider start byte address.
If ramdisk size is 0x800000 and start address is 0x2700000, then it's
used until 0x02efffff, not 0x02f00000. But it's detected to overlapt RD
image, when kernel start address is 0x02f00000.
Because it's doing wrong calculation about rd_len.
This patch fixed wrong calculation address position when check
condition.

In addition, it needs to check one more condition about overlapping
entire area.

Fixes: commit fbde7589 ("common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image")
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>

do_save() function defined in fs.c also supports FAT file system
re-use the same for fatwrite command.

Also fix the FAT test script to match the expected output.
Signed-off-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: NBiju Das <biju.das.jz@bp.renesas.com>

Provide unit tests for functions print_freq() and print_size().
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Enable the command "misc" for accessing miscellaneous devices with
a MISC uclass driver. The command provides listing all MISC devices
as well as read and write functionalities via their drivers.
Signed-off-by: NBin Meng <bin.meng@windriver.com>

CONFIG_CMD_TIMER merits a single file instead of co-exist in the
sleep command file.
Signed-off-by: NBin Meng <bin.meng@windriver.com>

The "cmd/Kconfig" has a TODO description for CMD_MISC that it should
really be named as CMD_SLEEP. Change it in the whole source tree.
Signed-off-by: NBin Meng <bin.meng@windriver.com>

This change fixes two issues when building u-boot-nodtb.bin target:

* Remove intermediate binary u-boot-nodtb.bin from disk when static_rela
  call (which modifies u-boot-nodtb.bin binary) failed. It is required
  because previous objcopy call creates binary and static_rela finish it.

* Do not call static_rela cmd when u-boot-nodtb.bin binary was not
  created/updated by previous objcopy call.

Second fix would ensure that u-boot-nodtb.bin binary is not updated when
all prerequisites were up-to-date. And therefore final binary u-boot.bin
is not updated in case all prerequisites were not modified and were
up-to-date.

Now running 'make SOURCE_DATE_EPOCH=0 u-boot.bin' second time now does not
touch u-boot.bin binary in case nothing was modified, so GNU make can
correctly detect that everything is up-to-date.
Signed-off-by: NPali Rohár <pali@kernel.org>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Update the size of states_array to avoid overflow for
dev_pdata->voltages[j] and dev_pdata->states[j].

As the size of array is GPIO_REGULATOR_MAX_STATES, the size of
states_array is limited by GPIO_REGULATOR_MAX_STATES * 2 = 4
instead of 8 previously.

The value of the "count" variable is limited by the third parameter of
fdtdec_get_int_array_count.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

(A && A == 0x20) is only true for (A == 0x20).
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

I had inadvertently merged the Xen series before everything was fully
happy with the board maintainer.  Revert the series.

This reverts commit 18426bf0.
Signed-off-by: NTom Rini <trini@konsulko.com>

This reverts commit 3a51b2a2.
Signed-off-by: NTom Rini <trini@konsulko.com>

This reverts commit 16389a74.
Signed-off-by: NTom Rini <trini@konsulko.com>

This reverts commit 82e21b39.
Signed-off-by: NTom Rini <trini@konsulko.com>

- sun8i emac changes (Andre)
- SCP firmware (Samuel)

- Assorted updates for Xen, IPQ40xx, ASpeed, Keymile
- Assorted typo / documentation fixes
- Fix default preboot cmd to act like before with USB_STORAGE set
- A number of other bugfixes throughout the code

add Kconfig option for pcf8563 driver and
run tools/moveconfig.py
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NStefan Roese <sr@denx.de>

dev_err has been used for debugging and a few dev_err message are
printed for normal code execution. Make them dev_dbg instead.
Signed-off-by: NFabien Parent <fparent@baylibre.com>
Reviewed-by: NPeng Fan <peng.fan@nxp.com>

By using a hypervisor call, we can implement DEBUG_UART on xen.
This will allow us to see messages even earlier than serial_init().
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>

Those definitions added are used with HYPERVISOR_console_io().
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NPeng Fan <peng.fan@nxp.com>

This new function, xen_debug_putc(), is intended to be used to
enable CONFIG_DEBUG_UART on xen guest.

Please note that the underlying functionality in Xen is available
only when Xen is configured with !NDEBUG but is much simpler than
a generic HYPERVISOR_console_io().
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NPeng Fan <peng.fan@nxp.com>

At present, DM_FLAG_PRE_RELOC is set only if !OF_CONTROL.
It doesn't make sense for this para-virtualized driver.

With this patch applied, you will be able to see early boot messages:

U-Boot 2020.10-00001-ge442e71a6c52-dirty (Oct 15 2020 - 11:02:25 +0900)
xenguest

Xen virtual CPU
Model: XENVM-4.15
DRAM:  128 MiB
PVBLOCK:
(XEN) gnttab_mark_dirty not implemented yet
pvblock: 0
In:    hypervisor
Out:   hypervisor
Err:   hypervisor
xenguest#
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NPeng Fan <peng.fan@nxp.com>

1. Rename AST2500 reset driver from ast2500-reset.c
   to reset-ast2500.c
2. Rename AST2500 reset kconfig option from AST2500_RESET
   to RESET_AST2500
Signed-off-by: NChia-Wei, Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: NRyan Chen <ryan_chen@aspeedtech.com>

The System Control Unit (SCU) controller of Aspeed
SoCs provides the reset control for each peripheral.

This patch refactors the reset method to leverage
the SCU reset control. Thus the driver dependency
on watchdog including dedicated WDT API and reset
flag encoding can be eliminated.

The Kconfig description is also updated accordingly.
Signed-off-by: NChia-Wei, Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: NRyan Chen <ryan_chen@aspeedtech.com>