Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

rsdproto board support has wrong I2C frequency and wrong return value
handling.
Signed-off-by: NLuotao Fu <l.fu@pengutronix.de>

Apply Grant Likely's backout to MPC5121 code, too.

Pointed out by Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>

Ugh.  I *hate* to back this change out, but these compiler flags don't
work for relocation on all versions of GCC.  I've not been able to
reproduce the environment in my setup (and hence, not been able to
find a combination that *does* work), so I've got no choice but to go
back to the old gcc flags and linker script.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch has been sent on:
- 29 Sep 2007

Although mips_io_port_base is currently a part of IDE command, it is quite
fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
it to MIPS general part, and introduce `set_io_port_base()' from Linux.

This patch is triggered by multiple definition of `mips_io_port_base' build
error on gth2 (and tb0229 also needs this fix.)

board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
/home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
make: *** [u-boot] Error 1
Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
the most significant bit was set, which did not work on any
architecture where "char" defaulted to be an unsigned type.

Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>

Sometimes you can't reference the DDR2 controller variables.
Signed-off-by: NJon Loeliger <jdl@freescale.com>

Signed-off-by: NJason Jin <Jason.jin@freescale.com>

Basically, refactor the CFG_PIXIS_VBOOT_MASK values
into the separate board config files.
Signed-off-by: NJason Jin <Jason.jin@freescale.com>
Signed-off-by: NJon Loeliger <jdl@freescale.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This reverts commit 3649cd99.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This reverts commit 6f7576b2.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This reverts commit a85dd254.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This reverts commit f3a52fe0.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This reverts commit 5af61b2f.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This reverts commit 057004f4.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This reverts commit 8d17979d.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

This patch implements general ULi 526x Ethernet driver.
Until now, it is the only native Ethernet port on
MPC8610HPCD board, but it could be used on other boards
with ULi 526x Ethernet port as well.
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NZhang Wei <wei.zhang@freescale.com>
Acked-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NBen Warren <bwarren@qstreams.com>

This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
"miiphy_duplex()".  It also adds function "miiphy_is_1000base_x ()", which
returns non-zero iff the PHY registers are configured for 1000BASE-X.  The
"mii info" command is modified to distinguish between 1000BASE-T and -X.
Signed-off-by: NLarry Johnson <lrj@acm.org>
Signed-off-by: NBen Warren <bwarren@qstreams.com>

Signed-off-by: NLarry Johnson <lrj@acm.org>
Signed-off-by: NBen Warren <bwarren@qstreams.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Changed the wording to properly describe the shadowing
of the environment from ROM to RAM
Signed-off-by: NBruce Adler <bruce.adler@acm.org>

Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp>