The old macros made it difficult to know what WIMGE and perm bits
were set for a TLB entry.  Actually use the bit masks for these items
since they are only a single bit.

Also moved the macros into mmu.h out of e500.h since they aren't specific
to e500.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Grab the FSL Book-E MAS register macros from Linux.  Also added
defines for page sizes up to 4TB and removed SHAREN since it doesnt
really exist.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Fix what looks like a merge artifact.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

Ctrl combo key support is added, which is very useful to input Ctrl-C
for interrupt current job.
Also add usb_event_poll() calling to usb_kbd_testc(), which can get
key input when tstc() is called.
Signed-off-by: NZhang Wei <wei.zhang@freescale.com>

Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

We now have more useful version of do_mii() and everybody use it.
Gerald Van Baren says:

> When I originally wrote the mii command 6(!) years ago, I wrote a
> verbose version that printed human readable decomposition of the flags,
> etc., and a terse one that didn't print as much stuff and thus had a
> smaller memory footprint.
>
> It sounds like the terse version has withered and died, apparently
> people are only using the verbose version (which is very understandable,
> I do myself).
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>

remove sha1.o from mkimage linking since it isn't actually used.
Signed-Off-By: NMike Frysinger <vapier@gentoo.org>

If type mii command without arguments, we suffer from uninitialized argv[]
entries; for example we MIPS get stuck by TLB error.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

didnt realize how out of shape easylogo actually was until i tried using it.
this patch does byte swapping as need be on the input tga header since the tga
is in little endian but the host could just as well be big endian.  i didnt
bother using bswap macros or such stuff from system headers as nothing in
POSIX dictates byte swapping functionality.
Signed-Off-By: NMike Frysinger <vapier@gentoo.org>

- make the Makefile not suck
- include proper headers for prototypes
- fix obvious broken handling of strchr() when handling '.' in filenames
Signed-Off-By: NMike Frysinger <vapier@gentoo.org>

This patch allows u-boot to build without error in a cygwin
environment.  Cygwin does not define __u64 in it's
include/asm/types.h file.  The -idirafter flag in the u-boot
build causes the inclusion of the cygwin types.h file as opposed
to u-bot/include/asm/types.h file which does define __u64.
Subsequently, sha1.c compile fails due to unknown symbol.
Signed-off-by: NBrian Miller <raptorbrino@netscape.net>

The existing code can show information about a gzip compressed BMP
image, but can't actually display it.

Therefore, move the decompression code out of bmp_info() and use it in
bmp_display() as well in order to display a compressed BMP image.

Also, clean things up a bit and fix a memory leak while we're at it.

[hskinnemoen@atmel.com: a bit of refactoring]
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

This patch fixes several issues at least on a MPC885 based system with two
FEC interfaces used in MII mode.

1. PHY discovery should first read PHY_PHYIDR2 register and only then
   PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
   otherwise the values read are wrong. Also notice, that PHY discovery
   cannot work on MPC88x / MPC87x in setups with both FECs active at all
   in its present form, because for both interfaces the registers from FEC
   1 are used to communicate over MII.

2. Remove code duplication for resetting the FEC by isolating it into a
   separate function.

3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().

4. Optimize mii_init() to only reset the FEC 1 controller once.

5. Fix a typo in mii_init() using index i instead of j thus potentially
   leading to unpredictable results.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

It is unclear on what platforms this driver has been tested, since
noone up to now defines CONFIG_RTL8169 in the board configuration
header. Now it has been fixed for a big-endian mpc8241 based
linkstation platform. This patch presents the necessary endianness
conversion fixes.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

Ctrl combo key support is added, which is very useful to input Ctrl-C
for interrupt current job.
Also add usb_event_poll() calling to usb_kbd_testc(), which can get
key input when tstc() is called.
Signed-off-by: NZhang Wei <wei.zhang@freescale.com>
Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>

Conflicts:

	board/tqm5200/tqm5200.c

Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch removes the unnecessary bit swapping when
booting .bit files with the 'fpga loadb' command.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

This patch adds a post configuration callback for Spartan2/3 FPGAs.
pre and post configuration callback are now optional and
not called when the function pointer is set to NULL.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

This patch removes the FPGA subsystem configuration through
the CONFIG_FPGA bitmask configuration option.

See README for the new options:

	CONFIG_FPGA,
	CONFIG_FPGA_<vendor>,
	CONFIG_FPGA_<family>
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

With this patch it is possible to reimplement default_serial_console()
in board specific code. This will be done in the upcomming PMC440
U-Boot port. This also allows the lwmon board maintainer to
remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

This patch adds a 'cu' like serial terminal command to u-boot
using which you can access other serial ports from the system console.

OpenMoko uses this in their Neo1973 phones to get access to the GSM
Modem and GPS chip from the bootloader.
Signed-off-by: NHarald Welte <laforge@openmoko.org>

that used to exist with the legacy NAND code
Signed-off-by: NHarald Welte <laforge@openmoko.org>

Signed-off-by: NHarald Welte <laforge@openmoko.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Add until the new phylib will be arrived
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

based on Linux source tree's .gitignore files
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>