- 28 1月, 2018 40 次提交
-
-
由 Patrice Chotard 提交于
Move SYSCFG clock setup into configure_clocks() instead of calling clock_setup() from board file. As this clock is only needed in case of ethernet enabled and as both stm32f4 and stm32f7 are using the Designware ethernet IP, we use CONFIG_ETH_DESIGNWARE to only enable this clock if needed. Move the RMII setup from board_early_init_f() to board_init() to insure that RMII bit is set only when clock driver is initialized. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Thanks to 'commit ba1f9667 ("net: designware: add clock support")' we don't need anymore to setup the STMMAC clock in board. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-
由 Patrice Chotard 提交于
Add ETHMAC, ETHMACRX and ETHMACTX clocks for STMMAC. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-
由 Bradley Bolen 提交于
Several inline functions in this file reference undefined functions in U-Boot. For example: atomic-long.h:73:9: warning: implicit declaration of function 'atomic64_sub_and_test' atomic-long.h:80:9: warning: implicit declaration of function 'atomic64_dec_and_test' atomic-long.h:87:9: warning: implicit declaration of function 'atomic64_inc_and_test' Handle this the same as the 32 bit build by wrapping these functions in a __UBOOT__ check. Signed-off-by: NBradley Bolen <bradleybolen@gmail.com>
-
由 Patrice Chotard 提交于
_ Add gpio compatible and aliases for stm32f469 _ Add FMC sdram node _ Add "u-boot,dm-pre-reloc" for rcc, fmc, fixed-clock, pinctrl, pwrcfg and gpio nodes. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
This DT file comes from kernel v4.15, this board offers : _ STM32F429NIH6 microcontroller _ 4.3” color TFT LCD with resistive touchscreen (480 x 272 pixels) _ Six 5 V power supply options: Power jack ST-LINK/V2 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard _ SAI Audio DAC, stereo audio jack which supports headset with microphone _ Stereo digital microphone, audio terminal connector used to connect external speakers _ 2 GBytes (or more) SDIO interface MicroSD card _ RF EEPROM on I2 C compatible serial interface _ RS-232 communication _ IrDA transceiver _ JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded _ IEEE-802.3-2002 compliant Ethernet connector _ Camera module _ 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash _ Joystick with 4-directional control and selector _ Reset, Wakeup and Tamper buttons _ 4 color user LEDs _ Extension connectors & memory connectors for daughterboard or wrapping board _ USB OTG HS and FS with Micro-AB connectors _ RTC with backup battery _ CAN2.0A/B compliant connection _ Potentiometer _ Motor control connector Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Add stm32f429-evaluation board support. For more information, please visit: http://www.st.com/en/evaluation-tools/stm32429i-eval.htmlSigned-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
As clk_stm32f driver is able to retrieve HSE frequency from DT, CONFIG_STM32_HSE_HZ becomes useless. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
All current STM32F4 supported boards uses a 8MHz external oscillator. All current STM32F7 supported boards uses a 25MHz external oscillator. In order to introduce the new stm32f429-evaluation board which uses a 25MHz external oscillator without creating a dedicated struct stm32_clk_info for this board, retrieve the external oscillator frequency from DT and set pll_m accordingly to obtain 1MHz for the VCO. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
In order to retrieve the clk_hse fixed clock phandle in clk_stm32f driver, add "u-boot,dm-pre-reloc" property in Uboot specific DT file. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Heiko Schocher 提交于
compiling U-Boot with bosch_mpcxxxxd_sd_defconfig drops warning: arch/arm/lib/bootm-fdt.c: In function ‘arch_fixup_fdt’: arch/arm/lib/bootm-fdt.c:37:6: warning: unused variable ‘ret’ [-Wunused-variable] int ret = 0; ^~~ Fix it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Andrew F. Davis 提交于
When in early SPL we make some secure ROM calls that can effect DRAM, due to this it is more stable to store the args for these calls in SRAM, but uninitialized and zero'd globals are placed in BSS, located in DRAM. Force our args into the data section which is in SRAM during SPL. Signed-off-by: NAndrew F. Davis <afd@ti.com>
-
由 Mario Six 提交于
Fix some style violations in the board_r file. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Fix some style violations in the board_f file. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Clarify the computation precedence in two ternary operator constructions. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
There are some typos in the documentation of some functions in read.h; fix those. Signed-off-by: NMario Six <mario.six@gdsys.cc> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Mario Six 提交于
Make the MPC8xxx GPIO driver compatible with a live device tree. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Finally, make the mpc8xxx driver capable of handling more GPIO devices; this entails adding a special case for the MPC5121 SoC, and adding a set of new compatible strings. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Rename the Kconfig option, structures (and their members), as well as functions of the mpc85xx driver to include mpc8xxx to reflect the more generic usage. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
In preparation to making the MPC85xx GPIO driver useable for a broader range of SoCs, rename the driver file. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Fix some style violations in the MPC85XX GPIO driver. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Make the pca953x_gpio driver compatible with a live device tree. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Fix some style violations in the pca953x_gpio driver. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Martin Etnestad 提交于
The call to hash_block in passwd_abort fails with error ENOSPC on some systems. The reason is that the variable which specifies the size of the buffer to contain the computed hash does not get initialized. This patch initializes the variable with the size of the buffer. Signed-off-by: NMartin Etnestad <martin.etnestad@appeartv.com>
-
-
由 Tom Rini 提交于
The variable hcd_name is unsued, drop. Cc: Marek Vasut <marex@denx.de> Cc: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The isp116x-hcd driver is extremely long unused, so just remove it. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
-
-
-
由 Marek Vasut 提交于
Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Since the DTs are now in place, enable OF control so that they get bundled into the U-Boot. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add U-Boot DT extras for each SoC and board. This marks the required nodes with u-boot,dm-pre-reloc to start clock and PRR early on while avoiding modification of the DTs imported from Linux. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
The Stout board is not supported in Linux, so add a rudimentary DTS for H2 Stout as a placeholder for when a proper DTS is available. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: The Stout is already being shipped over, so proper DTS for both U-Boot and Linux will happen once it's delivered :-)
-
由 Marek Vasut 提交于
Import the Renesas R8A7794 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Import the Renesas R8A7793 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Import the Renesas R8A7792 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Import the Renesas R8A7791 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-