- 11 1月, 2008 1 次提交
-
-
由 Anatolij Gustschin 提交于
Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS are not displayed correctly. This is an attempt to fix this issue. Also add carriage return handling. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Signed-off-by: NRodolfo Giometti <giometti@linux.it>
-
- 10 1月, 2008 32 次提交
-
-
由 Ben Warren 提交于
Change return values of init() functions in all Ethernet drivers to conform to the following: >=0: Success <0: Failure All drivers going forward should return 0 on success. Current drivers that return 1 on success were left as-is to minimize changes. Signed-off-by: NBen Warren <biggerbadderben@gmail.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NKim Phillips <kim.phillips@freescale.com> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-By: NTimur Tabi <timur@freescale.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
由 Kim Phillips 提交于
Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
-
由 Andy Fleming 提交于
These boards weren't updated by Kumar's config patch because they weren't in the tree, yet. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Timur Tabi 提交于
Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Add command-line command "qe fw" to take a firmware blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Signed-off-by: NTimur Tabi <timur@freescale.com>
-
由 Kumar Gala 提交于
Either use the standard defines in asm/cache.h or grab the information at runtime from the L1CFG SPR. Also, minor cleanup in cache.h to make the code a bit more readable. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 robert lazarski 提交于
Add support for Instituto Atlantico's ATUM8548 board Signed-off-by: Nrobert lazarski <robertlazarski@gmail.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 robert lazarski 提交于
Add support for Instituto Atlantico's ATUM8548 board Signed-off-by: Nrobert lazarski <robertlazarski@gmail.com>
-
由 Joe Hamman 提交于
Add support for Wind River's SBC8548 reference board. Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
-
由 Joe Hamman 提交于
Add support for Wind River's SBC8548 reference board. Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> Signed-off by: Andy Fleming <afleming@freescale.com>
-
由 Anton Vorontsov 提交于
To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should be set up appropriately. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset UCCs. p.s Similar code exists in the Linux kernel board file (for capability reasons with older U-Boots), but should be removed some day. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Kumar Gala 提交于
The old macros made it difficult to know what WIMGE and perm bits were set for a TLB entry. Actually use the bit masks for these items since they are only a single bit. Also moved the macros into mmu.h out of e500.h since they aren't specific to e500. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Grab the FSL Book-E MAS register macros from Linux. Also added defines for page sizes up to 4TB and removed SHAREN since it doesnt really exist. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
Way back in August I merged Heiko's patch: 566a494f: [PCS440EP] upgrade the PCS440EP board with Jon's CONFIG_COMMANDS patches. This was done in commit: 6bf6f114 However, in the process, I left out some of Heiko's good changes. Now Heiko's and Jon's patches are properly merged in fat_register_device() Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Wolfgang Denk 提交于
-
-
-
由 James Yang 提交于
Add new function readline_into_buffer() that allows the output of readline to be put into a pointer to char buffer. This refactoring allows other functions besides the main command loop to also use the same input mechanism. Signed-off-by: NJames Yang <James.Yang@freescale.com> Acked-by: NJon Loeliger <jdl@freescale.com>
-
-
由 Guennadi Liakhovetski 提交于
Fix what looks like a merge artifact. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Zhang Wei 提交于
Ctrl combo key support is added, which is very useful to input Ctrl-C for interrupt current job. Also add usb_event_poll() calling to usb_kbd_testc(), which can get key input when tstc() is called. Signed-off-by: NZhang Wei <wei.zhang@freescale.com>
-
由 Marcel Ziswiler 提交于
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Marcel Ziswiler 提交于
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Shinya Kuribayashi 提交于
We now have more useful version of do_mii() and everybody use it. Gerald Van Baren says: > When I originally wrote the mii command 6(!) years ago, I wrote a > verbose version that printed human readable decomposition of the flags, > etc., and a terse one that didn't print as much stuff and thus had a > smaller memory footprint. > > It sounds like the terse version has withered and died, apparently > people are only using the verbose version (which is very understandable, > I do myself). Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>
-
由 Mike Frysinger 提交于
remove sha1.o from mkimage linking since it isn't actually used. Signed-Off-By: NMike Frysinger <vapier@gentoo.org>
-
由 Shinya Kuribayashi 提交于
If type mii command without arguments, we suffer from uninitialized argv[] entries; for example we MIPS get stuck by TLB error. Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
-
由 Wolfgang Denk 提交于
-
由 Rafal Jaworowski 提交于
This is an API for external (standalone) applications running on top of U-Boot, and is meant to be more extensible and robust than the existing jumptable mechanism. It is similar to UNIX syscall approach. See api/README for more details. Included is the demo application using this new framework (api_examples). Please note this is still an experimental feature, and is turned off by default. Signed-off-by: NRafal Jaworowski <raj@semihalf.com>
-
由 Rafal Jaworowski 提交于
The newly introduced API (routines related to env vars) will need to call it. Signed-off-by: NRafal Zabdyr <armo@semihalf.com>
-
- 09 1月, 2008 7 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
didnt realize how out of shape easylogo actually was until i tried using it. this patch does byte swapping as need be on the input tga header since the tga is in little endian but the host could just as well be big endian. i didnt bother using bswap macros or such stuff from system headers as nothing in POSIX dictates byte swapping functionality. Signed-Off-By: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
- make the Makefile not suck - include proper headers for prototypes - fix obvious broken handling of strchr() when handling '.' in filenames Signed-Off-By: NMike Frysinger <vapier@gentoo.org>
-
由 raptorbrino@aim.com 提交于
This patch allows u-boot to build without error in a cygwin environment. Cygwin does not define __u64 in it's include/asm/types.h file. The -idirafter flag in the u-boot build causes the inclusion of the cygwin types.h file as opposed to u-bot/include/asm/types.h file which does define __u64. Subsequently, sha1.c compile fails due to unknown symbol. Signed-off-by: NBrian Miller <raptorbrino@netscape.net>
-
由 Hans-Christian Egtvedt 提交于
The existing code can show information about a gzip compressed BMP image, but can't actually display it. Therefore, move the decompression code out of bmp_info() and use it in bmp_display() as well in order to display a compressed BMP image. Also, clean things up a bit and fix a memory leak while we're at it. [hskinnemoen@atmel.com: a bit of refactoring] Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
由 Guennadi Liakhovetski 提交于
This patch fixes several issues at least on a MPC885 based system with two FEC interfaces used in MII mode. 1. PHY discovery should first read PHY_PHYIDR2 register and only then PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it, otherwise the values read are wrong. Also notice, that PHY discovery cannot work on MPC88x / MPC87x in setups with both FECs active at all in its present form, because for both interfaces the registers from FEC 1 are used to communicate over MII. 2. Remove code duplication for resetting the FEC by isolating it into a separate function. 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init(). 4. Optimize mii_init() to only reset the FEC 1 controller once. 5. Fix a typo in mii_init() using index i instead of j thus potentially leading to unpredictable results. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Guennadi Liakhovetski 提交于
It is unclear on what platforms this driver has been tested, since noone up to now defines CONFIG_RTL8169 in the board configuration header. Now it has been fixed for a big-endian mpc8241 based linkstation platform. This patch presents the necessary endianness conversion fixes. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-