It is possible to add a blob that ends at the end of the bloblist, but at
present this is not supported. Fix it and add a regression test for this
case.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Some comments for struct bloblist_hdr are a bit ambiguous. Update them to
clarify the meaning more precisely. Also document bloblist_get_stats()
properly.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Sometimes a blob needs to expand, e.g. because it needs to hold more log
data. Add support for this. Note that the bloblist must have sufficient
spare space for this to work.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Rather than calling directly into the sandbox SDL code, we can use the
normal U-Boot console handling for this feature. Update the code, to make
it more generic.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The v2 format is 64-bytes in size. Support this and drop v1 since it is
not used anymore.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This function is not needed anymore. Drop it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add a function to read this information from the EC. It is useful for
determining whether the battery has enough charge to boot.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this down to provide more space for the bloblist.
Signed-off-by: NSimon Glass <sjg@chromium.org>

SDL provides a hinting feature which provides a higher-quality image
with the double-display option (-K). Enable it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present the display does not show on some machines, e.g. Ubunutu
20.04 but the reason is unknown. Add a work-around until this can be
determined.

Also include more error checking just in case.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The SPL header has a function for obtaining the phase in capital letters,
e.g. 'SPL'. Add one for lower-case also, as used by sandbox.

Use this to generalise the sandbox logic for determining the filename of
the next sandbox executable. This can provide support for VPL.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present this fails to build chromeos_sandbox due to a rebase error
in dm_test_pre_run(). Fix it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present if DM_DMA is disabled on a sandbox build, the build fails.
Make the test conditional.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present if this is not enabled on a sandbox build, the build fails. Add
a condition to avoid this.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Allow lzma compression as well as lz4.
Signed-off-by: NSimon Glass <sjg@chromium.org>

It is sometimes helpful to see which sequence is assigned to a device.
Add debugging info for that.
Signed-off-by: NSimon Glass <sjg@chromium.org>

When things go wrong it can be confusing to figure out what to change.
Add a few more details to the documentation.

Fix a 'make htmldocs' warning while we are here.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NWalter Lozano <walter.lozano@collabora.com>

At present if a driver is missing a uclass or compatible stirng, this
is silently ignored. This makes sense in most cases, particularly for
the compatible string, since it is not required except when the driver
is used with of-platdata.

But it is also not very helpful. When there is some sort of problem
with a driver, the missing compatible string (for example) may be the
cause.

Add a warning in this case, showing it only for drivers which are used
by the build.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NWalter Lozano <walter.lozano@collabora.com>

Some rockchip drivers use a suffix on the of_match line which is not
strictly valid. At present this causes the parsing to fail. Fix this
and offer a warning.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This test captures output but does not always check it. Add the missing
code and drop the old comment.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This expects a . before the field name (.e.g '.compatible = ...) but
presently accepts anything at all. Fix it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NWalter Lozano <walter.lozano@collabora.com>

At present we show when a driver is missing but this is not always that
useful. There are various reasons why a driver may appear to be missing,
such as a parse error in the source code or a missing field in the driver
declaration.

Update the implementation to record all warnings for each driver, showing
only those which relate to drivers that are actually used. This avoids
spamming the user with warnings related to a driver for a different board.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NWalter Lozano <walter.lozano@collabora.com>

Use this parser instead of OptionParser, which is deprecated.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NWalter Lozano <walter.lozano@collabora.com>

These are not supported before Python 3.6 so avoid them.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NWalter Lozano <walter.lozano@collabora.com>

- R-Car3 updates

Filter out dmas dma-names interrupt-parent interrupts interrupts-extended
interrupt-names interrupt-map interrupt-map-mask iommus DT properties on
R-Car Gen3, since they are not used by U-Boot and only take space.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

The RPC HF might be locked by ATF, and any access to its register
space would result in complete hang. Disable the RPC HF by default.
The ATF should be patched to set RPC node status = "okay" in the DT
fragment it passes to U-Boot in case the RPC HF access is unlocked,
and that way U-Boot could access the RPC HF safely.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

The CPU: print only has one space after it, while the other prints
from U-Boot align the value to offset 7. Align the CPU: print too.
No functional change.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Enable support for sysinfo on supported R-Car Gen3 boards. The sysinfo
is used e.g. to access and decode board-specific information and then
in turn used by board-info to print those information. On R-Car Gen3
the sysinfo rcar3 driver is used to parse the board ID EEPROM, obtain
board type and revision from it, and let board-info print this
information on boot.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Enable support for I2C EEPROM driver on supported Renesas R-Car Gen3 boards.
This is useful for accessing the board ID EEPROM.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Add sysinfo node and phandle to the board ID EEPROM on all boards
where this functionality is described in DT, which is Salvator-X(S),
ULCB and Ebisu. The u-boot,dm-pre-reloc is necessary here, since the
sysinfo must be available early during boot. The V3M and V3H boards
currently do not describe this board ID EEPROM in upstream DT, but
that could be easily added later, once the DTs contain the necessary
nodes.

ULCB and Ebisu needs the full EEPROM node in the u-boot extras DT,
since the EEPROM node is still missing in the upstream DTs. Ebisu
also needs extra compatible string override for the i2c_dvfs.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

The Renesas R-Car Gen3 development kits contain board ID EEPROM.
This driver parses out the board ID and revision out of that
EEPROM and exports it e.g. for the board-info print on boot.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Sean Anderson <sean.anderson@seco.com>
Cc: Simon Glass <sjg@chromium.org>

- Marvell SheevaPlug: Convert Ethernet and SATA to Driver Model (Tony)
- Zyxel NSA310S NAS: Convert to Driver Model (Tony)
- Turris_omnia: Add `u-boot-env` NOR partition (Marek)
- Turris_omnia: Fixup MTD partitions in Linux' DTB (Marek)
- Espressobin: Enable 'mtd' command and define SPI NOR partitions (Pali)

- Enabled distro boot for all TI platforms.
- Cleanup for AM335x Guardian Board
- PRUSS rproc on AM65 platform.
- Add PMIC support for J7200
- Misc fixes for Nokia RX-51

# Conflicts:
#	arch/arm/mach-omap2/am33xx/Kconfig

U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable
'mtd' command support for Espressobin board and define partition layout in
U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old
method and 'mtd' command is now preferred variant.

From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is
now defined and enabled in defconfig file. This change is required to fix
compile error:

      CC      arch/arm/lib/asm-offsets.s
    In file included from include/config.h:4,
                     from include/common.h:16,
                     from lib/asm-offsets.c:14:
    include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined
     #define CONFIG_MTD_PARTITIONS  /* required for UBI partition support */

    In file included from ././include/linux/kconfig.h:4,
                     from <command-line>:
    include/generated/autoconf.h:44: note: this is the location of the previous definition
     #define CONFIG_MTD_PARTITIONS 1

After enabling support for mtd command, output from 'mtd list' on
Espressobin board is:

    => mtd list
    List of MTD devices:
    * w25q32dw
      - device: spi-flash@0
      - parent: spi@10600
      - driver: jedec_spi_nor
      - path: /soc/internal-regs/spi@10600/spi-flash@0
      - type: NOR flash
      - block size: 0x1000 bytes
      - min I/O: 0x1 bytes
      - 0x000000000000-0x000000400000 : "w25q32dw"
              - 0x000000000000-0x0000003f0000 : "firmware"
              - 0x0000003f0000-0x000000400000 : "u-boot-env"
    =>
Signed-off-by: NPali Rohár <pali@kernel.org>
Reviewed-by: NKonstantin Porotchkin <kostap@marvell.com>
Reviewed-by: NStefan Roese <sr@denx.de>

Fixup SPI NOR partition nodes in Linux' device tree prior booting Linux.

Linux' devicetree does not contain "u-boot-env" partition and we do not
want to add it there because the address is different between stock
U-Boot and current upstream U-Boot.

Instead we add code that recreates partition nodes from scratch
according to how U-Boot sees them (which is defined in U-Boot's device
tree).
Signed-off-by: NMarek Behún <marek.behun@nic.cz>
Reviewed-by: NStefan Roese <sr@denx.de>

Specify a separate partition `u-boot-env` for U-Boot's env settings for
the Turris Omnia board.

Do this only in U-Boot's specific DTS. We do not want to do this in
Linux' official DTS, because Omnia's stock U-Boot stores env at a
different address, and there are still boards with stock U-Boot.

In a subsequent patch will add board code that fixes Linux's DTB before
booting Linux.
Signed-off-by: NMarek Behún <marek.behun@nic.cz>
Reviewed-by: NStefan Roese <sr@denx.de>

- In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
with Ethernet PHY name from device tree. Also, Ethernet PHY address
is available so read it from device tree.
Signed-off-by: NTony Dinh <mibodhi@gmail.com>

Enable DM SATA, removed IDE driver, and add SATA MV driver.
Signed-off-by: NTony Dinh <mibodhi@gmail.com>

Add DM_ETH, SATA_MV and associated configs to sheevaplug_defconfig
Signed-off-by: NTony Dinh <mibodhi@gmail.com>