- 24 9月, 2017 6 次提交
-
-
由 Tom Rini 提交于
In some cases, such as FreeBSD, the path to an alternative dtc needs to be used. Rather than override the one given in the Makefile on the command line, make this part of the build configuration. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This makes us act like the Linux Kernel does and allow for dtc to be provided externally but otherwise we use the version of dtc that is included in the sources. This in turn means that we can drop the checkdtc logic. We select DTC in the cases where we will need the dtc tool provided. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This adds the following commits from upstream: fe50bd1ecc1d fdtget: Split out cell list display into a new function 62d812308d11 README: Add a note about test_tree1.dts 5bed86aee9e8 pylibfdt: Add support for fdt_subnode_offset() 46f31b65b3b3 pylibfdt: Add support for fdt_node_offset_by_phandle() a3ae43723687 pylibfdt: Add support for fdt_parent_offset() a198af80344c pylibfdt: Add support for fdt_get_phandle() b9eba92ea50f tests: Return a failure code when any tests fail 155faf6cc209 pylibfdt: Use local pylibfdt module 50e5cd07f325 pylibfdt: Add a test for use of uint32_t ab78860f09f5 pylibfdt: Add stdint include to fix uint32_t 36f511fb1113 tests: Add stacked overlay tests on fdtoverlay 1bb00655d3e5 fdt: Allow stacked overlays phandle references a33c2247ac8d Introduce fdt_setprop_placeholder() method 0016f8c2aa32 dtc: change default phandles to ePAPR style instead of both e3b9a9588a35 tests: fdtoverlay unit test 42409146f2db fdtoverlay: A tool that applies overlays aae22722fc8d manual: Document missing options 13ce6e1c2fc4 dtc: fix sprintf() format string error, again d990b8013889 Makefile: Fix build on MSYS2 and Cygwin 51f56dedf8ea Clean up shared library compile/link options 21a2bc896e3d Suppress expected error message in fdtdump test 2a42b14d0d03 dtc: check.c fix compile error a10cb3c818d3 Fix get_node_by_path string equality check 548aea2c436a fdtdump: Discourage use of fdtdump c2258841a785 fdtdump: Fix over-zealous version check 9067ee4be0e6 Fix a few whitespace and style nits e56f2b07be38 pylibfdt: Use setup.py to build the swig file 896f1c133265 pylibfdt: Use Makefile constructs to implement NO_PYTHON 90db6d9989ca pylibfdt: Allow setup.py to operate stand-alone e20d9658cd8f Add Coverity Scan support b04a2cf08862 pylibfdt: Fix code style in setup.py 1c5170d3a466 pylibfdt: Rename libfdt.swig to libfdt.i 580a9f6c2880 Add a libfdt function to write a property placeholder ab15256d8d02 pylibfdt: Use the call function to simplify the Makefile 9f2e3a3a1f19 pylibfdt: Use the correct libfdt version in the module e91c652af215 pylibfdt: Enable installation of Python module 8a892fd85d94 pylibfdt: Allow building to be disabled 741cdff85d3e .travis.yml: Add builds with and without Python library prerequisites 14c4171f4f9a pylibfdt: Use package_dir to set the package directory 89a5062ab231 pylibfdt: Use environment to pass C flags and files 4e0e0d049757 pylibfdt: Allow pkg-config to be supplied in the environment 6afd7d9688f5 Correct typo: s/pylibgfdt/pylibfdt/ 756ffc4f52f6 Build pylibfdt as part of the normal build process 8cb3896358e9 Adjust libfdt.h to work with swig b40aa8359aff Mention pylibfdt in the documentation 12cfb740cc76 Add tests for pylibfdt 50f250701631 Add an initial Python library for libfdt cdbb2b6c7a3a checks: Warn on node name unit-addresses with '0x' or leading 0s 4c15d5da17cc checks: Add bus checks for simple-bus buses 33c3985226d3 checks: Add bus checks for PCI buses Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This adds the following commits from upstream: 558cd81bdd43 dtc: Bump version to v1.4.4 c17a811c62eb fdtput: Remove star from value_len documentation 194d5caaefcb fdtget: Use @return to document the return value d922ecdd017b tests: Make realloc_fdt() really allocate *fdt 921cc17fec29 libfdt: overlay: Check the value of the right variable 9ffdf60bf463 dtc: Simplify asm_emit_string() implementation 881012e44386 libfdt: Change names of sparse helper macros bad5b28049e5 Fix assorted sparse warnings 672ac09ea04d Clean up gcc attributes 49300f2ade6a dtc: Don't abuse struct fdt_reserve_entry Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Using the update-dtc-source.sh script from Linux v4.14-rc1 import the portions of dtc that we require. We bring in update-dtc-source.sh and scripts/dtc/Makefile from Linux v4.14-rc1. Rework DTC_FLAGS handling to not require a test. Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
- 23 9月, 2017 16 次提交
-
-
-
由 Frank Kunz 提交于
For EFI boot GPT partition table support is needed as well as the part command and also the SPL needs to fallback to other boot methods after parse the SPL header. Signed-off-by: NFrank Kunz <mailinglists@kunz-im-inter.net>
-
由 Masahiro Yamada 提交于
GCC 7.1 warns: duplicate ‘const’ declaration specifier [-Wduplicate-decl-specifier] Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
CONFIG_NAND_DENALI select's CONFIG_SYS_NAND_SELF_INIT, so the NAND initialization process is driven by the driver itself. CONFIG_SYS_NAND_MAX_CHIPS and CONFIG_SYS_NAND_BASE are unused. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Yangbo Lu 提交于
PPA loading during SPL stage is not required for nornal SD boot scenario. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Yangbo Lu 提交于
PPA loading during SPL stage is not required for nornal SD boot scenario. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Yangbo Lu 提交于
Current u-boot disables IFC support for SD boot on all ls1043a boards. Actually IFC only conflicts with QSPI on ls1043a hardware. Only when QSPI is used, IFC should be disabled. Otherwise, the u-boot with ls1043aqds_sdcard_ifc_defconfig would not work. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Priyanka Jain 提交于
As per current implementation, default value of board env is based on board filename i.e ls2080ardb. With distro support changes, this env is used to decide upon kernel dtb which is different for other SoCs (ls2088a, ls2081a) combination supported with this board. Add support to modify board env at runtime based on SoC type Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Priyanka Jain 提交于
For most of ls2080ardb use-cases, mc private DRAM block is required to be of 1.75GB. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> [YS: this reservation needs to be reduced if memory is not enough] Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Sriram Dash 提交于
I2C code is put under CONFIG_SYS_I2C. Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Sriram Dash 提交于
IFC code is put under CONFIG_FSL_IFC Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Bharat Bhushan 提交于
Commit 0aaa1a90 added support for LS208xA devices but fixing iommu-map property is missing. This patch adds support for fixing iommu-map. Signed-off-by: NBharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com> [YS: revised commit message] Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Santan Kumar 提交于
As per updated board design, different QSPI flash is connected on boards, hence change QSPI flash type from Micron n25q512a device to spansion s25fs512s device in dts and config. Signed-off-by: NSantan Kumar <santan.kumar@nxp.com> Signed-off-by: NYogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Santan Kumar 提交于
CONFIG_DISPLAY_BOARDINFO_LATE config is used to delay the prints of boardinfo late in cycle during uboot boot. This feature is not required in case of QSPI_BOOT. Signed-off-by: NSantan Kumar <santan.kumar@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ashish Kumar 提交于
It is not necessary for every SoC to have 2 SATA controller. So put SATA1, SATA2 code under respective defines. Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 York Sun 提交于
Commit a8ecb39e accidentally reverted config macro CONFIG_ARCH_LS1021A to CONFIG_LS102XA. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
- 22 9月, 2017 18 次提交
-
-
由 Tom Rini 提交于
Our minimum DTC version is 1.4.3, so check that out. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Jörg Krause 提交于
Fixes: net/tftp.c:811: undefined reference to `efi_set_bootdev' Signed-off-by: NJörg Krause <joerg.krause@embedded.rocks> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
With support for overlays and calling the -@ flag to dtc we need to have at least 1.4.3 available now. Cc: Simon Glass <sjg@chromium.org> Reported-by: NStephen Warren <swarren@wwwdotorg.org> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 York Sun 提交于
common/spl/spl_fit.c:201:12: warning: passing argument 4 of ‘gunzip’ from incompatible pointer type [-Wincompatible-pointer-types] src, &length)) Signed-off-by: NYork Sun <york.sun@nxp.com> Reported-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> CC: Jean-Jacques Hiblot <jjhiblot@ti.com>
-
由 Felix Brack 提交于
This patch provides default implementations of the two functions set_uart_mux_conf and set_mux_conf_regs. Hence boards not using them do not need to provide their distinct empty definitions. Signed-off-by: NFelix Brack <fb@ltec.ch> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Patrice Chotard 提交于
This patch adds support for stm32h7 soc family, stm32h743 discovery and evaluation boards. For more information about STM32H7 series, please visit: http://www.st.com/en/microcontrollers/stm32h7-series.htmlSigned-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
This patch adapts stm32h743 disco and eval dts files to match with U-boot requirements or add features wich are not yet upstreamed on kernel side : _ Add RCC clock driver node and update all clocks phandle accordingly. By default, on kernel side, all clocks was temporarly configured as a phandle to timer_clk waiting for a RCC clock driver to be available. On U-boot side, we now have a dedicated RCC clock driver, we can configured all clocks as phandle to this driver. All this binding update will be available soon in a kernel tag, as all the bindings have been acked by Rob Herring [1]. [1] http://lkml.iu.edu/hypermail/linux/kernel/1704.0/00935.html _ Align STM32H7 serial compatible string with the one which will be available in next kernel tag. The bindings has been acked by Rob Herring [2]. This compatible string will be usefull to add stm32h7 specific feature for this serial driver. [2] https://lkml.org/lkml/2017/7/17/739 _ Add gpio compatible and aliases for stm32h743 _ Add FMC sdram node with associated new bindings value to manage second bank (ie bank 1). _ Add missing HSI and CSI oscillators nodes needed by STM32H7 RCC clock driver. Clock sources could be: _ HSE (High Speed External) _ HSI (High Speed Internal) _ CSI (Low Power Internal) These clocks can be used as clocksource in some configuration. By default, HSE is selected as clock source. _ Set HSE to 25Mhz for stm32h743i-disco and eval board By default, the external oscillator frequency is defined at 25 Mhz in SoC stm32h743.dtsi file. It has been set at 125 Mhz in kernel DT temporarly waiting for RCC clock driver becomes available. As in U-boot we got a RCC clock driver, the real value of HSE clock can be used. _ Add "u-boot,dm-pre-reloc" for rcc, fmc, fixed-clock, pinctrl, pwrcfg and gpio nodes. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
This file is imported from linux kernel v4.13 Add device tree support for STM32H743 evaluation board. This board offers : _ STM32H743XIH6 microcontroller with 2 Mbytes of Flash memory and 1 Mbyte of RAM in TFBGA240+25 package _ 5.7” 640x480 TFT color LCD with touch screen _ Ethernet compliant with IEEE-802.3-2002 _ USB OTG HS and FS _ I2 C compatible serial interface _ RTC with rechargeable backup battery _ SAI Audio DAC _ ST-MEMS digital microphones _ 8-Gbyte (or more) SDIO3.0 interface microSD™ card _ 8Mx32bit SDRAM, 1Mx16bit SRAM and 8Mx16bit NOR Flash _ 1-Gbit Twin Quad-SPI NOR Flash _ Potentiometer _ 4 colored user LEDs _ Reset, wakeup, tamper or key buttons _ Joystick with 4-direction control and selector _ Board connectors : Power jack 3 USB with Micro-AB RS-232 communications Ethernet RJ45 FD-CAN compliant connection Stereo headset jack including analog microphone input 2 audio jacks for external speakers microSD™ card JTAG/SWD and ETM trace _ Expansion connectors: Extension connectors and memory connectors for daughterboard or wire-wrap board _ Flexible power-supply options: ST-LINK USB VBUS or external sources _ On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, virtual COM port and debug port Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
All these files are imported from linux kernel v4.13 Add device tree support for STM32H743 SoC and discovery board. This board offers : _ STM32H743XIH6 microcontroller with 2 Mbytes of Flash memory and 1 Mbyte of RAM in TFBGA240+25 package _ 5.7” 640x480 TFT color LCD with touch screen _ Ethernet compliant with IEEE-802.3-2002 _ USB OTG HS _ I2 C compatible serial interface _ ST-MEMS digital microphones _ 8-Gbyte (or more) SDIO3.0 interface microSD™ card _ 8Mx32bit SDRAM _ 1-Gbit Twin Quad-SPI NOR Flash _ Reset, wakeup, or key buttons _ Joystick with 4-direction control and selector _ Board connectors : 1 USB with Micro-AB Ethernet RJ45 Stereo headset jack including analog microphone input microSD™ card RCA connector JTAG/SWD and ETM trace _ Expansion connectors: Arduino Uno compatible Connectors 2 x PIO connectors (PMOD and PMOD+) _ On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, virtual COM port and debug port Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Christophe Kerello 提交于
This patch adds the support of reset and clock control block (rcc) found on STM32 SoCs. This driver is similar to a MFD linux driver. This driver supports currently STM32H7 only. STM32F4 and STM32F7 will be migrated to this rcc MFD driver in the future to uniformize all STM32 SoCs already upstreamed. Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
This driver is adapted from linux drivers/reset/reset-stm32.c It's compatible with STM32 F4/F7/H7 SoCs. This driver doesn't implement .of_match as it's binded by MFD RCC driver. To add support for each SoC family, a SoC's specific include/dt-binfings/mfd/stm32xx-rcc.h file must be added. This patch only includes stm32h7-rcc.h dedicated for STM32H7 SoCs. Other SoCs support will be added in the future. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
This driver implements basic clock setup, only clock gating is implemented. This driver doesn't implement .of_match as it's binded by MFD RCC driver. Files include/dt-bindings/clock/stm32h7-clks.h and doc/device-tree-bindings/clock/st,stm32h7-rcc.txt will be available soon in a kernel tag, as all the bindings have been acked by Rob Herring [1]. [1] http://lkml.iu.edu/hypermail/linux/kernel/1704.0/00935.htmlSigned-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
STM32F7 and STM32H7 shares the same UART block, add STM32H7 compatible string. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
STM32H7 SoCs uses the same pinctrl block as found into STM32F7 SoCs Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-
由 Kever Yang 提交于
Since we may jump to next stage like ATF/OP-TEE instead of U-Boot, we need to stash the bootstage info before it. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
Add usb_gadget_handle_interrupts(), board_usb_init(), board_usb_cleanup() and g_dnl_board_usb_cable_connected() callbacks needed for FASTBOOT support Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
Update ehci and ohci node's compatible string in order to use ehci-generic and ohci-generic drivers. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
On STi 96boards, configure by default the micro USB connector (managed by DWC3 hardware block) in peripheral mode. This will allow to use fastboot feature. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-