- 10 5月, 2008 4 次提交
-
-
由 Marcel Ziswiler 提交于
Removed the second include, with all the #ifdef around as suggested by Wolfgang. Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Adrian Filipi 提交于
This patch fixes three typos. The first is a repetition of CONFIG_CMD_BSP. The second makes the #endif comment match its #if. The third is a spelling error. Signed-off-by: NAdrian Filipi <adrian.filipi@eurotech.com>
-
由 Grant Erickson 提交于
Add support for the recognition of 'powerpc' as an alias for the PowerPC architecture type since Linux is already trending in that direction, preferring 'powerpc' to 'ppc'. Signed-off-by: NGrant Erickson <gerickson@nuovations.com>
-
由 Wheatley Travis 提交于
The 7610 and related parts have an L2IP bit in the L2CR that is monitored to signal when the L2 cache invalidate is complete whereas the 7450 and related parts utilize L2I for this purpose. However, the current code does not account for this difference. Additionally the 86xx L2 cache invalidate code used an "andi" instruction where an "andis" instruction should have been used. This patch addresses both of these bugs. Signed-off-by: NTravis Wheatley <travis.wheatley@freescale.com> Acked-By: NJon Loeliger <jdl@freescale.com>
-
- 09 5月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
Fix a bogus circular dependency that caused an infinite loop of "Generating include/autoconf.mk" again and again. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 05 5月, 2008 4 次提交
-
-
-
由 Vlad Lungu 提交于
.gpword works only with local symbols on certain binutils versions Signed-off-by: NVlad Lungu <vlad.lungu@windrvier.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 04 5月, 2008 20 次提交
-
-
由 Wolfgang Denk 提交于
Update ChNAGELOG, minor white space cleanup. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
Some systems are dumb and do not implement the -n flag to echo (like OS X). Convert the Makefile to use printf as this should work everywhere. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
If you enable environment in the flash, but disable the embedded option, and you disable the saveenv command, then the #if nested logic will trigger a compile failure: env_flash.c: In function 'env_relocate_spec': env_flash.c:399: error: 'flash_addr' undeclared (first use in this function) The fix is to add CMD_SAVEENV ifdef protection like everywhere else. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Jeremy McNicoll 提交于
Fix incorrect mask to enable all 64MB of onboard flash. Previously U-Boot incorrectly mapped only 8MB of flash, this patch correctly maps all the available flash. Signed-off-by: NJeremy McNicoll <jeremy.mcnicoll@windriver.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
-
由 Marcel Ziswiler 提交于
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Mike Frysinger 提交于
The mmap() related code is full of inconsistent casts/constants when it comes to error checking, and may break when building on some systems (like ones that do not implicitly define the caddr_t type). Let's just avoid the whole mess by writing the code nice and clean in the first place. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Marcel Ziswiler 提交于
- warning: 'srom' defined but not used Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Marcel Ziswiler 提交于
- warning: implicit declaration of function ‘serial_initialize’ Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Andre Schwarz 提交于
The Vitesse VSC8601 RGMII PHY has internal delay for both Rx and Tx clock lines. They are configured using 2 bits in extended register 0x17. Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay. Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: NAndy Fleming <afleming@freescale.com> Acked-by: NBen Warren <biggerbadderben@gmail.com> -- drivers/net/tsec.c | 6 ++++++ drivers/net/tsec.h | 3 +++ 2 files changed, 9 insertions(+), 0 deletions(-)
-
由 Wolfgang Denk 提交于
This reverts commit b7166e05 (replaced by commit c4e5f52a).
-
由 Wolfgang Denk 提交于
Some config.mk files reference $(CC) to test for specific tool chain features, so make sure $(CC) gets set before including any such config files. This patch replaces commit b7166e05 ("ColdFire: Get information from the correct GCC"). Signed-off-by: NWolfgang Denk <wd@denx.de>
-
start.S:183:1: warning: "ICMR" redefined In file included from start.S:33: include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition start.S:187:1: warning: "RCSR" redefined ... Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Kumar Gala 提交于
Make the flags use -Os like all other boards Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
-
由 Stefan Roese 提交于
This patch fixes a problem with the month being read and written incorrectly (offset by one). This only gets visible by also using the Linux driver (rtc-m41t80). Tested on AMCC Canyonlands. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 03 5月, 2008 2 次提交
-
-
由 Shinya Kuribayashi 提交于
Current trick to pick up GNU assembler minor version uses a dot(.) as a delimiter, and take the second field to obtain minor version number. But as can be expected, this doesn't work with a version string which has dots more than needs. Here's an example: $ mips-linux-gnu-as --version | grep 'GNU assembler' GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2 2-129) 2 $ This patch restricts the version format to 2.XX.XX... This will work in most cases. $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' 2.18.50.20080215 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2 18 $ Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-
由 Shinya Kuribayashi 提交于
Recent bootelf command fixes (017e9b79, "allow ports to override bootelf behavior") requires ports to have this function. Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 02 5月, 2008 2 次提交
-
-
-
由 Wolfgang Denk 提交于
Onenand needs a version of memcpy() which performs 16 bit accesses only; make sure the name does not conflict with the standard function. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 01 5月, 2008 7 次提交
-
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Timur Tabi 提交于
Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Signed-off-by: NTimur Tabi <timur@freescale.com>
-
由 TsiChung Liew 提交于
The ethernet hang is caused by receiving buffer in DRAM is not yet ready due to access cycles require longer time in DRAM. Relocate DMA buffer descriptors from DRAM to internal SRAM. Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChung Liew 提交于
Signed-off-by: NLuigi Comio Mantellini <luigi.mantellini@idf-hit.com> Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChung Liew 提交于
Signed-off-by: NKurt Mahan <kmahan@freescale.com> Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
-
Fix warnings nv_nand.c: In function 'saveenv': env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type env_nand.c: In function 'env_relocate_spec': env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type if compiled for davinci_schmoogie_config. Signed-off-by: NDirk Behme <dirk.behme@gmail.com> Ack by: Sergey Kubushyn <ksi@koi8.net>
-