- 13 5月, 2019 1 次提交
-
-
由 Heinrich Schuchardt 提交于
Assign include/charset.h to EFI PAYLOAD. The functions defined in this include are used by the UEFI sub-system. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 03 5月, 2019 2 次提交
-
-
由 Horatiu Vultur 提交于
Update device tree for ocelot to add support for ocelot pcb120. Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
-
由 Peng Fan 提交于
Update the mmc maintainer from Jaehoon to me. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com> Acked-by: NMarek Vasut <marex@denx.de>
-
- 01 5月, 2019 1 次提交
-
-
由 Kever Yang 提交于
This updates MAINTAINERS and git-mailrc to add me as a co-custodian for rockchip Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NJagan Teki <jagan@amarulasolutions.com> Acked-by: NTom Rini <trini@konsulko.com>
-
- 27 4月, 2019 3 次提交
-
-
由 Andrew F. Davis 提交于
Add new defconfig files for the AM65x High Security EVM. This defconfigs are the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y' Signed-off-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>
-
由 Andrew F. Davis 提交于
K3 HS devices require signed binaries for boot, use the SECDEV tools to sign the boot artifacts during build. Signed-off-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>
-
由 Andrew F. Davis 提交于
K3 devices have High Security (HS) variants along with the non-HS already supported. Like the previous generation devices (OMAP/Keystone2) K3 supports boot chain-of-trust by authenticating and optionally decrypting images as they are unpacked from FIT images. Add support for this here. Signed-off-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>
-
- 24 4月, 2019 1 次提交
-
-
由 Simon Goldschmidt 提交于
This updates MAINTAINERS and git-mailrc to add me as a co-custodian for socfpga. Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NMarek Vasut <marex@denx.de>
-
- 23 4月, 2019 2 次提交
-
-
由 Jerome Brunet 提交于
In order to support the Amlogic G12A clock controller, re-architect the clock files into a meson directory. No functionnal changes. MAINTAINERS entry is also updated. Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Heinrich Schuchardt 提交于
The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 18 4月, 2019 1 次提交
-
-
由 Eugeniy Paltsev 提交于
Add the DM_MMC-compatible DesignWare MMC driver support for Synopsys ARC devboards. It is created to switch ARC devboards to use DM_MMC. It required information such as clocks (Bus Interface Unit clock, Card Interface Unit clock) and SDIO bus width. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
- 12 4月, 2019 2 次提交
-
-
由 Patrick Delaunay 提交于
Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NLukasz Majewski <lukma@denx.de>
-
由 Jagan Teki 提交于
Missed few mails from openedev, since most of the day I look at amarulasolutions mail so update the same. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 31 3月, 2019 1 次提交
-
-
由 Lukasz Majewski 提交于
Signed-off-by: NLukasz Majewski <lukma@denx.de>
-
- 28 3月, 2019 1 次提交
-
-
由 Heinrich Schuchardt 提交于
The EFI PAYLOAD will use git://git.denx.de/u-boot-efi.git in future. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 19 3月, 2019 1 次提交
-
-
由 Stefan Roese 提交于
This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better start maintaining. - Add multiple Marvell / MVEBU related driver directories and files Signed-off-by: NStefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Acked-by: NLuka Perkov <luka.perkov@sartura.hr> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 14 3月, 2019 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
The MAINTAINERS file was copied from Linux Kernel along with all its statuses of maintainership. However tools/genboardscfg.py accepts only Maintained, Supported and Orphan. Remove then the Odd Fixes and Obsolete from MAINTAINERS file to avoid confusion. Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
-
- 25 2月, 2019 2 次提交
-
-
由 AKASHI Takahiro 提交于
Currently, there is no easy way to add or modify UEFI variables. In particular, bootmgr supports BootOrder/BootXXXX variables, it is quite hard to define them as u-boot variables because they are represented in a complicated and encoded format. The new command, efidebug, helps address these issues and give us more friendly interfaces: * efidebug boot add: add BootXXXX variable * efidebug boot rm: remove BootXXXX variable * efidebug boot dump: display all BootXXXX variables * efidebug boot next: set BootNext variable * efidebug boot order: set/display a boot order (BootOrder) Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 AKASHI Takahiro 提交于
"env [print|set] -e" allows for handling uefi variables without knowing details about mapping to corresponding u-boot variables. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 19 2月, 2019 2 次提交
-
-
由 Alexander Graf 提交于
Heinrich is going to take over maintainership of the efi_loader tree going forward. To ensure that I will still receive review mails at least, add me as reviewer with a stable email address. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Alexander Graf 提交于
Matthias Brugger agreed to take over maintainership from me for the Raspberry Pi tree. Add him to the MAINTAINERS file instead. Signed-off-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 09 2月, 2019 2 次提交
-
-
由 Andrew F. Davis 提交于
Add a new defconfig file for the AM57xx High Security EVM. This config is specific for the case of USB/UART booting. Signed-off-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Andrew F. Davis 提交于
Add a new defconfig file for the DRA7xx High Security EVM. This config is specific for the case of USB booting. Signed-off-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 07 2月, 2019 1 次提交
-
-
由 Vignesh R 提交于
Add myself as co-maintainer for U-Boot SPI NOR subsystem. Signed-off-by: NVignesh R <vigneshr@ti.com> Reviewed-by: NJagan Teki <jagan@openedev.com> [jagan: drop mtd/spi file from SPI entry] Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 06 2月, 2019 2 次提交
-
-
由 Eugen Hristev 提交于
Update Atmel AT91 maintainership Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com> Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
-
由 York Sun 提交于
Change maintainers to Prabhakar Kushwaha for fsl-qoriq, mpc85xx and mpc86xx. Signed-off-by: NYork Sun <york.sun@nxp.com> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
- 01 2月, 2019 1 次提交
-
-
由 Horatiu Vultur 提交于
Move file ocelot_switch to mscc_eswitch to prepare to add new net drivers for other MSCC SoCs. Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
-
- 31 1月, 2019 1 次提交
-
-
由 Neil Armstrong 提交于
Add entry for Amlogic SoC maintained files and the freshly created mailing-list. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
- 29 1月, 2019 1 次提交
-
-
由 Fabio Estevam 提交于
I prefer to use my personal email address for U-Boot related work. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
- 26 1月, 2019 1 次提交
-
-
由 Patrick Delaunay 提交于
Handle correctly directory arch/arm/mach-stm32mp/ : Add a trailing slash to include all files and subdirectory files. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
- 24 1月, 2019 2 次提交
-
-
由 Michal Simek 提交于
Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f240) Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Gregory CLEMENT 提交于
This patch adds support for the Microsemi Ethernet switch present on Ocelot SoCs. Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
- 21 1月, 2019 1 次提交
-
-
由 Marek Behún 提交于
Add myself as the maintainer of CZ.NIC's Turris Omnia and Turris Mox projects. Signed-off-by: NMarek Behún <marek.behun@nic.cz> Reviewed-by: NStefan Roese <sr@denx.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 16 1月, 2019 5 次提交
-
-
由 Horatiu Vultur 提交于
Add device tree based on evaluation board pcb112. Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
-
由 Horatiu Vultur 提交于
Add device tree based on evaluation board pcb110. Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
-
由 Horatiu Vultur 提交于
The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common to support new numbe of pins and remove any platform dependency from mscc-common. Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
-
由 Lars Povlsen 提交于
This patch add a new SPI driver for MSCC SOCs that does not sport the designware SPI hardware controller. Performance gain: 7.664 seconds vs. 17.633 for 1 Mbyte write. Signed-off-by: NLars Povlsen <lars.povlsen@microchip.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Lars Povlsen 提交于
This add support for the the MSCC serial GPIO driver in MSCC VCoreIII-based SOCs. By using a serial interface, the SIO controller significantly extends the number of available GPIOs with a minimum number of additional pins on the device. The primary purpose of the SIO controller is to connect control signals from SFP modules and to act as an LED controller. This adds the base driver. Signed-off-by: NLars Povlsen <lars.povlsen@microchip.com>
-
- 15 1月, 2019 1 次提交
-
-
由 Weijie Gao 提交于
This patch adds new file entries for MediaTek SoCs Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com>
-
- 10 1月, 2019 1 次提交
-
-
由 Peng Fan 提交于
Update NXP i.MX mail list address Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-