- 13 10月, 2017 3 次提交
-
-
由 Uri Mashiach 提交于
The i.MX7 SOC doesn't include the SATA interface. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Diego Dorta 提交于
When compiling with W=1 errors are observed: drivers/pci/pcie_imx.c:517:12: warning: no previous prototype for ‘imx6_pcie_toggle_power’ [-Wmissing-prototypes] __weak int imx6_pcie_toggle_power(void) drivers/pci/pcie_imx.c:528:12: warning: no previous prototype for ‘imx6_pcie_toggle_reset’ [-Wmissing-prototypes] __weak int imx6_pcie_toggle_reset(void) Remove these warnings by adding the functions prototypes on arch-mx6/sys_proto. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
-
由 Diego Dorta 提交于
When compiling with W=1 the following warning is observed: arch/arm/mach-imx/mx6/clock.c:1268:5: warning: no previous prototype for ‘do_mx6_showclocks’ [-Wmissing-prototypes] int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) Remove this warning by adding the function prototype into arch-mx6/clock.h file. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
-
- 12 10月, 2017 31 次提交
-
-
由 Anatolij Gustschin 提交于
UART pinmux has been changed on the last board revision. Change board pinmux accordingly. Console is on UART7 now, add pinmux, base address and update console string in environment. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
mx6slevk can run different kernel versions, such as NXP 4.1 or mainline. Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the SD card changes depending on the kernel version. In order to avoid such issue, use the UUID method to specify the rootfs location. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Sven-Ola Tuecke 提交于
We have at least a minor count of boards, that failed to re-initialize PCI express in the Linux kernel. Typical failure rate is 20% on affected boards. This is mitigated by commit 6ecbe137 ("drivers: pci: imx: add imx_pcie_remove function"). However, at least on some i.MX6 custom boards, when calling assert_core_reset() as part of the first-time PCIe init, read access to PCIE_PL_PFLR simply hangs. Surround this readl() with imx_pcie_fix_dabt_handler() does not help. For this reason, the forced LTSSM detection is only used on the second assert_core_reset() that is called shorly before starting the Linux kernel. Signed-off-by: NSven-Ola Tuecke <sven-ola.tuecke@numberfour.eu> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Tested-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 Fabio Estevam 提交于
Latest wandboard hardware revision is revd1, which brings the following new features: - PFUZE100 PMIC - AR8035 Ethernet PHY - Upgrade Wifi/BT chip to BCM4339/BCM43430. The detection mechanism is to probe the PMIC and when it is found, then the revision of the board is revd1. As the detection is done via PMIC, we need to print the board version at a later stage via CONFIG_DISPLAY_BOARDINFO_LATE and also need to disable CONFIG_DISPLAY_BOARDINFO, which is done much earlier. Make the necessary adjustments for the AR8035 PHY to work on revd1. Based on Richard Hu's work from Technexion's U-Boot tree. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Stefan Agner 提交于
The changes required to use U-Boot's Serial Download Protocol implementation are now available in upstream imx_usb_loader repository. Update the URL accordingly. Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Ilya Ledvich 提交于
Add initial support for Compulab cl-som-imx7 SoM. The initial support includes: - MMC - eMMC - SPI flash - I2C - FEC - USB - Serial console Signed-off-by: NIlya Ledvich <ilya@compulab.co.il>
-
由 Uri Mashiach 提交于
Add configuration file and spl_boot_device function for the i.MX7 SPL. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il>
-
由 Uri Mashiach 提交于
The configuration files imximage.cfg are used for the DDR controller configuration. Add DDR configuration function to replace the DDR controller configuration in the imximage.cfg file. The function can be used for DDR size detection. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il>
-
由 Uri Mashiach 提交于
The CCM_ macros use the CCM_BASE_ADDRESS macro, which doesn't exist. Replace the CCM_BASE_ADDRESS macros with CCM_BASE_ADDR. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Jagan Teki 提交于
Instead of changing mmc devno from dts nodes better to return the detected devno so-that env trigger the same. Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Jagan Teki 提交于
Fix for finding mmc devices on i.MX6Q icore boards added in below comment "icorem6: Fix to find MMC devices" (sha1: a2b137b3) which is reverted in during u-boot-imx merge " Merge git://git.denx.de/u-boot-imx" (sha1: 6aee2ab6) This patch, is recreated to fix merge conflict. Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Fabio Estevam 提交于
CONFIG_CMD_BOOTZ option has been converted to defconfig, so there is no need to undefine it in board config file anymore. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Diego Dorta 提交于
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:586:5: warning: no previous prototype for ‘board_ehci_hcd_init’ [-Wmissing-prototypes] int board_ehci_hcd_init(int port) Remove this warning by including <usb/ehci-ci.h>. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
-
由 Diego Dorta 提交于
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:601:5: warning: no previous prototype for ‘board_ehci_power’ [-Wmissing-prototypes] int board_ehci_power(int port, int on) Remove this warning by adding the function prototype into usb/ehci-ci.h file. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
-
由 Diego Dorta 提交于
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:680:5: warning: no previous prototype for ‘board_spi_cs_gpio’ [-Wmissing-prototypes] int board_spi_cs_gpio(unsigned bus, unsigned cs) Remove this warning by including <asm/mach-imx/spi.h>. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
-
由 Diego Dorta 提交于
When compiling with W=1 the following warning is observed: arch/arm/mach-imx/mx6/soc.c:213:12: warning: no previous prototype for ‘get_board_rev’ [-Wmissing-prototypes] u32 __weak get_board_rev(void) Fix the build warning by including <asm/bootm.h>. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
-
由 Fabio Estevam 提交于
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Diego Dorta 提交于
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:266:5: warning: no previous prototype for ‘board_mmc_get_env_dev’ [-Wmissing-prototypes] int board_mmc_get_env_dev(int devno) Remove this warning by adding the function prototype into sys_proto.h file. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Diego Dorta 提交于
When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including <input.h>. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Fabio Estevam 提交于
CONFIG_SPL_PAD_TO is already defined inside "imx6_spl.h", so there is no need to redefine it in the board config files. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Otavio Salvador 提交于
The CONFIG_SYS_MMC_ENV_DEV is duplicated, drop it. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
This rework the board to use the generic filesystem commands instead of forcing the use of FAT for the boot files. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
Now that it is possible to load SPL and u-boot.img via imx_usb_loader tool, mention this method instead of the old one that relied on ymodem. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Fabio Estevam 提交于
With CONFIG_DISPLAY_CPUINFO=y we get a "Reset cause" line, which brings important information of the reboot cause. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Anatolij Gustschin 提交于
We do not use print_cpuinfo and clock command code in SPL, disable it when building SPL image. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Fabio Estevam 提交于
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Fabio Estevam 提交于
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Fabio Estevam 提交于
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
- 11 10月, 2017 5 次提交
-
-
-
由 Chris Packham 提交于
Commit 8e6eda7c ("drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support") introduced a chip_desc for the pca954x devices but failed to update pca954x_ofdata_to_platdata() to be aware of it. Make pca954x_ofdata_to_platdata() lookup the chip_desc to validate the device width. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NMarek Behun <marek.behun@nic.cz>
-
-
由 Tuomas Tynkkynen 提交于
The option is specified in Kconfig, but still a few config header files are overriding the choice by #undef'ing it. Re-sync the option with moveconfig to rid of the #undefs. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
由 Tuomas Tynkkynen 提交于
Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
- 10 10月, 2017 1 次提交
-
-