Reviewed-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

The environment variable "disable_giga" can now be used to disable
1000baseTx on the Micrel's KSZ9031.
Signed-off-by: NSebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

PXE boot is broken with GCC 7.1 due option '-fstore-merging' enabled
by default for '-O2':

BOOTP broadcast 1
data abort
pc : [<8ff8bb30>]          lr : [<00004f1f>]
reloc pc : [<17832b30>]    lr : [<878abf1f>]
sp : 8f558bc0  ip : 00000000     fp : 8ffef5a4
r10: 8ffed248  r9 : 8f558ee0     r8 : 8ffef594
r7 : 0000000e  r6 : 8ffed700     r5 : 00000000  r4 : 8ffed74e
r3 : 00060101  r2 : 8ffed230     r1 : 8ffed706  r0 : 00000ddd
Flags: nzcv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

Core reason is usage of structures for network headers without packed
attribute.
Reviewed-by: NYauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: NDenis Pynkin <denis.pynkin@collabora.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Add missing "defined" statement to fix the compile failures.
Signed-off-by: NHolger Dengler <dengler@linutronix.de>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Added the AFE (Analog Front End) settings for stability to the
Broadcom Cygnus phy. This improves the time take to perform
auto negotiation.
Signed-off-by: NArun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

move to Kconfig:
	CONFIG_BCM_SF2_ETH
	CONFIG_BCM_SF2_ETH_DEFAULT_PORT
	CONFIG_BCM_SF2_ETH_GMAC

Also modified defconfigs of all platforms that use these configs.
Signed-off-by: NSuji Velupillai <suji.velupillai@broadcom.com>
Tested-by: NSuji Velupillai <suji.velupillai@broadcom.com>
Reviewed-by: NJD Zheng <jiandong.zheng@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NSteve Rae <steve.rae@raedomain.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

The correct option is PHY_MICREL_KSZ90X1, but some configs still
select the 9021 and 9031 options, which are deprecated.
Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

There should be no longer be any ksz9000 users that pick up the PHY
driver from ksz8xxx, so remove ksz9000 remnants from there.
Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

These boards will now use the ksz90x1 driver instead of the mess in
ksz8xxx. This change is needed before the two drivers can be fully
separated.
Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they
share the same ID. Drivers for bothe PHYs cannot safely coexist, so
the solution was to use #ifdefs to select between the two drivers.

As a result KSZ9031, which has a unique ID, is now caught in the
crossfire. Unless CONFIG_PHY_MICREL_KSZ9031 is defined, the KSZ9031
will not function properly, as some essential configuration code is
ifdef'd-out.

To prevent such situations, move the KSZ9000 drivers to a separate
file, and place them under a separate Kconfig option. While it is
possible to enable both KSZ8000 and KSZ9000 drivers at the same time,
the assumption is that it is highly unlikely for a system to contain
both a KSZ8000 and a KSZ9000 PHY, and that only one of the drivers
will be enabled at any given time.
Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

For strncpy() select a minimal string length of destination and source
strings, here DEFAULT_NAME_LEN is preferable to MAX_LEN.

Due to the NUL-terminated contents of default_string the change is
a noop, however it removes a compilation warning if SH2/3/4 platform
specific strncpy() function is used:

  In file included from include/linux/string.h:21:0,
                   from include/common.h:28,
                   from net/tftp.c:9:

  net/tftp.c: In function 'tftp_start':
  arch/sh/include/asm/string.h:52:42: warning: array subscript is above array bounds [-Warray-bounds]
     : "0" (__dest), "1" (__src), "r" (__src+__n)
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Don't wait forever.
Pass errors back to the caller.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NMarek Vasut <marex@denx.de>

The register constants don't use the exact names that are used in the
TRM, so add comments that use the exact names so that it is clear what
register is being referred to.

https://www.atheros-drivers.com/qualcomm-atheros-datasheets-for-AR9331.htmlSigned-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NMarek Vasut <marex@denx.de>

After upgrading to GCC 7.1, the duplicate const specifies in the
r8152 driver trigger the following build warnings with buildman
(observed on a 'buildman rockchip' test)::
  ../drivers/usb/eth/r8152.c:62:35: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
   static const struct r8152_version const r8152_versions[] = {
                                     ^~~~~

This commit fixes these by removing the duplicate 'const' specifier
from the declarations.
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

This is only used in cmd/net.c
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Previously seeded by obtaining mac addr from env. If mac addr was
never set, rand would output 0. This fix obtains the mac addr
from driver instead.
Signed-off-by: NJimmy Du <jimmy.du@ni.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

phy_device_create(..) sets the addr of phy_device with a sane value.
There is no need overwrite it.
Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: NHannes Schmelzer <oe5hpm@oevsv.at>
Tested-by: NHannes Schmelzer <oe5hpm@oevsv.at>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Add support for rk3288 mipi dsi.
Signed-off-by: NEric Gao <eric.gao@rock-chips.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Signed-off-by: NEric Gao <eric.gao@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Add rk3288 soc specific driver for mipi dsi.
Signed-off-by: NEric Gao <eric.gao@rock-chips.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Add Makefile item for soc specific driver for rk3399 mipi dsi.
Signed-off-by: NEric Gao <eric.gao@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

To compatible with different rockchip soc, we split the mipi dirver into
common and soc specific parts, and all the soc share the common
functions from common driver part.
Signed-off-by: NEric Gao <eric.gao@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
[agust: fix build breakage and warnings]
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

The mipi panel used on evb-rk3399 has a 1920x1200 resolution. But now
the max resolution is 1920x1080. So increase it.
Signed-off-by: NEric Gao <eric.gao@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This is not used in U-Boot.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

This is not used in U-Boot.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

This is not used in U-Boot.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

This is not used in U-Boot.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

The environment has pretty much nothing to do with just "PPC", so
rename the macros to just __UBOOT_ENV_SECTION__ which is more
readable.

In addition, only a single macro is needed: the environment now goes
either to the default section (USE_HOSTCC is defined) or in the .text
section.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>

CONFIG_SYS_USE_PPCENV is no longer used anywhere. It was used to put
the environment in the special .ppcenv section, but the last
architecture using this section (SuperH) has been changed to not use
it.

Therefore, this commit drops support for CONFIG_SYS_USE_PPCENV
entirely. We only handle two cases:

 - We're building the host tool tools/envcrc, in which case the
   environment is place with no special section attribute (so it
   depends up in .data)

 - We're building U-Boot itself, in which case the environnement is
   placed in the .text section.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>

This converts the following to Kconfig:
   CONFIG_SYS_TEXT_BASE

The includes, whitelist, etc. were left for now but I don't get any
build errors or warnings on the omap3_logic_defconfig or
am3517_evm_defconfig builds I tried.
Signed-off-by: NAdam Ford <aford173@gmail.com>

fix the following compilation error reported by buidlman:

       arm:  +   stm32f429-discovery
+arch/arm/mach-stm32/stm32f4/soc.c: In function 'arch_cpu_init':
+arch/arm/mach-stm32/stm32f4/soc.c:30:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
+  for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++)
+  ^
+arch/arm/mach-stm32/stm32f4/soc.c:30:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
+make[3]: *** [arch/arm/mach-stm32/stm32f4/soc.o] Error 1
+make[2]: *** [arch/arm/mach-stm32/stm32f4] Error 2
+make[1]: *** [arch/arm/mach-stm32] Error 2
+make: *** [sub-make] Error 2
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Acked-by: NVikas Manocha <vikas.manocha@st.com>

Fix the UART input clock for the early debug UART, it should be
100MHz, instead of 88MHz.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>

Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>