- 30 8月, 2007 2 次提交
-
-
由 Ed Swarthout 提交于
This reverts commit 9468e680. Commit 16e23c3f removing allocation of PCSRBAR is sufficient. Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>
-
由 Grant Likely 提交于
The TFTP OACK code trusts that the incoming packet is formated as ASCII text and can be processed by string functions. It also has a loop limit overflow bug where if the packet length is less than 8, it ends up looping over *all* of memory to find the 'blksize' string. This patch solves the problem by forcing the packet to be null terminated and using strstr() to search for the sub string. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 29 8月, 2007 18 次提交
-
-
-
由 Kim Phillips 提交于
this had slipped through the cracks, since the sbc board was added after I wrote the original patch to remove all these symbols, and before it was merged. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Wolfgang Denk 提交于
to get rid of a *lot* of compiler warnings. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
..because it caused compiler errors and there seems to be no board maintainer to take care of this. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Kumar Gala 提交于
<ed.swarthout@freescale.com> The problem is pciauto_setup_device() getting called from fsl_pci_init.c is allocating memory space it doesn't need. Signed-off-by: NEd Swarthout <ed.swarthout@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Ed Swarthout 提交于
Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the correct consoledev needed for linux boot. Standardize on fdt{file,addr} var to hold dtb file name. Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}. Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>
-
由 Haiying Wang 提交于
The L2 cache size is 512KB for 8568, print out the correct informaiton. Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>
-
由 Jason Jin 提交于
Signed-off-by: NJason Jin <Jason.jin@freescale.com>
-
由 Kim Phillips 提交于
if a board/$(VENDOR)/common/Makefile exists, build it. also add the first such case, board/freescale/common/Makefile, to handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as dictated by board configuration. thusly get rid of alternate build dir errors such as: FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory by putting the common/ mkdir command in its proper place (the common Makefile). Common bits from existing individual board Makefiles have been removed. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 stefano babic 提交于
TFTP does not work anymore after multicast tftp patch was applied on little endian systems. This patch fix it. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 stefano babic 提交于
The logic to check if there is a correct MAC address in the DM9000 EEPROM, added in the last patch, is wrong. Now the MAC address is always taken from the environment, even if a suitable MAC is present in the EEPROM. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Martin Krause 提交于
Fix the following warnings: - usb.c:xx: warning: function declaration isn't a prototype - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer from pointer wihtout a cast Signed-off-by: NMartin Krause <martin.krase@tqs.de>
-
由 Ed Swarthout 提交于
CPU physical address space was being wasted by allocating a PCSRBAR PCI inbound region to it's memory space. As a rule, PCSRBAR should be left alone since it does not affect transactions from self and other masters may have changed it. Signed-off-by: NEd Swarthout <ed.swarthout@freescale.com>
-
由 Martin Krause 提交于
This patch fixes the "type qualifiers ignored on fuction return tpye" warning for include/s3c2410.h Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Dirk Behme 提交于
omap2420h4 switched to cfi, so remove old (already disabled) flash.c and flash_probe() calls in env_flash.c. Signed-off-by: NDirk Behme <dirk.behme@gmail.com>
-
由 Kim Phillips 提交于
and make some minor corrections to the FDT part of the README. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
- 28 8月, 2007 2 次提交
-
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
define there own I/O functions. (Needed for the pcs440ep board). - The default I/O Functions are again 8 Bit accesses. - Added CONFIG_CMD_IDE for the pcs440ep Board. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 25 8月, 2007 1 次提交
-
-
由 Yuri Tikhonov 提交于
As experienced on lwmon5, on some boards the POST memory test can corrupt the global data buffer (bd). This patch fixes this issue by checking and limiting this area. Signed-off-by: NYuri Tikhonov <yur@emcraft.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 24 8月, 2007 2 次提交
-
-
由 Stefan Roese 提交于
Since this RTC POST test is taking quite a while to complete it's only initiated upon special keypress same as the complete memory POST. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 23 8月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5 board. Now the "eeprom" command can be used to read/write from/to this device. Additionally a new command was added "eepromwp" to en-/disable the write-protect of this 2nd EEPROM. The 1st EEPROM is not affected by this write-protect command. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 22 8月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 21 8月, 2007 2 次提交
-
-
由 Stefan Roese 提交于
-
由 Stefan Roese 提交于
This patch adds support for the matrix keyboard on the lwmon5 board. Since the implementation in the dsPCI is kind of compatible with the "old" lwmon board, most of the code is copied from the lwmon board directory. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 19 8月, 2007 8 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
-
由 Kim Phillips 提交于
platforms wishing to display RAM diagnostics in addition to size, can do so, on one line, in their own board_add_ram_info() implementation. this consequently eliminates CONFIG_ADD_RAM_INFO. Thanks to Stefan for the hint. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Shinya Kuribayashi 提交于
This patch has been sent on: - 6 Jun 2007 Many users of PCI config read routines tend to ignore the function ret value, and are only concerned about the contents of *val. Based on this, pci_hose_read_config_{byte,word}_via_dword should initialize the *val on dword read error. Without this fix, for example, we'll go on scanning bus with vendor or header_type uninitialized. This brings many unnecessary config trials. Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
-
- 18 8月, 2007 3 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-