Signed-off-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStefan Roese <sr@denx.de>

Clean Makefile
Move device specific values to driver for better reading
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStefan Roese <sr@denx.de>

Microblaze and PowerPC use boot_get_ramdisk for loading
ramdisk to memory with checking return value.
Return 0 means success. Return 1 means failed.
Here is correspond part of code from bootm.c which check
return code.

ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
		&rd_data_start, &rd_data_end);
if (ret)
	goto error;
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

Redesign uartlite driver to in_be32 and out_be32 macros
Fix missing header in io.h
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

which happened when rounding the serial port clock divisor
Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com>

Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

caused by missing dcache status/enable/disable functions.
Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com>

This patch removes some ft_board_setup() functions from some 4xx boards.
This can be done since we now have a default weak implementation for this
in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
implementation like canyonlands need their own version.
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Mail to kharris@nexus-tech.net bounces because the user doesn't exist
anymore. You can't be a maintainer without a valid e-mail address, so
move all boards that used to be maintained by Kyle Harris to the
"orphaned" list.

Currently, only PowerPC has a list of orphaned boards, so this patch
creates one for ARM as well.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

On the at91sam9260ep development board there is an EEPROM
connected to the TWI interface (PA23, PA24 Peripheral A
multiplexing), so we cannot use these pins as ETX2, ETX3.
This patch configures PA10, PA11 pins for ETX2, ETX3
instead of PA23, PA24 pins.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NManuel Sahm <Manuel.Sahm@feig.de>

The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
so it was not possible to set a slow pixel clock and thus prevented
display on small screens.
Signed-off-by: NKenneth Johansson <kenneth@southpole.se>
Acked-by: NJohn Rigby <jrigby@freescale.com>

board/ads5121/iopin.c
    Replace bit fields in struct iopin_t with a single
    field and intialize it via plain old macros.
    This fixes the type pun warnings and makes the code
    more readable.

board/ads5121/ads5121.c
    Add include iopin.h to ads5121.c for the iopin_initialize
    prototype.

    Add an extern void ads5121_diu_init(void)
Signed-off-by: NJohn Rigby <jrigby@freescale.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
CFG_CSn_RO is defined as 0, the chipselect will not
be assigned.
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
clock module in cpu/<cf arch>/cpu_init.c
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

Rename int mii_init(void) to void mii_init(void)
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

The compiling error was caused by missing a closed parentheses
in speed.c
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

The timer was assigned to wrong timer memory mapped which
caused udelay() and timer() not working properly.
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NKurt Mahan <kmahan@freescale.com>

Signed-off-by: NKurt Mahan <kmahan@freescale.com>

Signed-off-by: NKurt Mahan <kmahan@freescale.com>

Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
can generate the wrong divisor due to integer division truncation.
Round the calculated divisor value by adding 1/2 the baudrate
before dividing by the baudrate.
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: NGerald Van Baren <vanbaren@cideas.com>

This patch now moves common.h to the top of the inlcude list. This
is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
the phys_size_t/phys_addr_t are defined to the correct size in this
driver.
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>