- 30 12月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
Generated by "tools/moveconfig -s". This will make config moves easier. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 04 12月, 2016 1 次提交
-
-
由 Tom Rini 提交于
A number of platforms had been using the distro default feature before it was moved to Kconfig but did not enable the new Kconfig option when it was enabled. This caused a regression in terms of features and this introduces breakage when more things move to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 03 12月, 2016 1 次提交
-
-
由 York Sun 提交于
Move from CONFIG_SYS_EXTRA_OPTIONS to Kconfig option. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
- 28 10月, 2016 1 次提交
-
-
由 Tom Rini 提交于
Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NStephen Warren <swarren@nvidia.com>
-
- 24 10月, 2016 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV CONFIG_CONSOLE_MUX Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Re-order, re-migrate] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 10月, 2016 1 次提交
-
-
由 Sriram Dash 提交于
Enables driver model flag CONFIG_DM_USB for LS2080A platform defconfigs. Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 17 9月, 2016 1 次提交
-
-
由 Simon Glass 提交于
A few boards define this in a header file which is incorrect. It means that Kconfig options that rely on this cannot be used. Move it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 10 9月, 2016 1 次提交
-
-
由 Tom Rini 提交于
In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 9月, 2016 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 10 6月, 2016 1 次提交
-
-
由 Heiko Schocher 提交于
move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 04 6月, 2016 2 次提交
-
-
由 Masahiro Yamada 提交于
Create an entry for "config USB_XHCI_DWC3" in Kconfig and switch over to it for all boards. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 28 5月, 2016 1 次提交
-
-
由 Alexander Graf 提交于
We know for certain that we have 32bit DMA hardware, but 64bit addresses on LS2085A and ZynqMP, so let's enable EFI bounce buffers for all defconfigs on these SoCs. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 26 4月, 2016 3 次提交
-
-
由 Tom Rini 提交于
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 29 3月, 2016 1 次提交
-
-
由 Saksham Jain 提交于
Sec_init has been called at the beginning to initialize SEC Block (CAAM) which is used by secure boot validation later for both ls2080a qds and rdb. 64-bit address in ESBC Header has been enabled. Secure boot defconfigs are created for boards (NOR boot). Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 15 3月, 2016 1 次提交
-
-
由 Simon Glass 提交于
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 12月, 2015 2 次提交
-
-
由 Prabhakar Kushwaha 提交于
Freescale's LS2085A is a another personality of LS2080A SoC with support of AIOP and DP-DDR. This Patch adds support of LS2085A Personality. Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Updated MAINTAINERS files Dropped #ifdef in cpu.h Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Prabhakar Kushwaha 提交于
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 22 11月, 2015 1 次提交
-
-
由 Thomas Chou 提交于
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
- 30 10月, 2015 1 次提交
-
-
由 Prabhakar Kushwaha 提交于
Add support of setting RANDOM MAC address if env variable not available. Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 28 9月, 2015 1 次提交
-
-
由 Bin Meng 提交于
Some boards' defconfigs are disordered. Reorder them. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 22 8月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Move config for the E1000 Ethernet driver to Kconfig and tidy up affected boards. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 21 7月, 2015 1 次提交
-
-
Freescale DSPI driver has been converted to Driver Model. The new driver depends on OF_CONTROL, DM, DM_SPI. This patch enable FSL_DSPI and its dependence configure options. Signed-off-by: NHaikun Wang <haikun.wang@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 26 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 13 5月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
In order to reduce merge conflicts and to maintain the simplest possible defconfig files, we should be using the savedefconfig feature of Kconfig every time a new feature is added. This keeps the defconfig settings to a minimum (only those things not default) and keeps them in the same order as the Kconfig options. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
-
- 23 4月, 2015 1 次提交
-
-
由 York Sun 提交于
The LS2085ARDB is a evaluation platform that supports LS2085A family SoCs. This patch add sbasic support for the platform. Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: NBhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 26 9月, 2014 1 次提交
-
-
由 York Sun 提交于
LS1021AQDS has a variant with DDR4 slot. This patch adds a new defconfig for this variant to enable DDR4 support. RAW timing parameters are not added for DDR4. The board timing parameters are only tuned for single- rank 1600 and 1800MT/s with Micron DIMM 9ASF51272AZ-2G1A1 due to DIMM availability. Signed-off-by: NYork Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com>
-
- 09 9月, 2014 1 次提交
-
-
由 Wang Huan 提交于
LS102xA is an ARMv7 implementation. This patch is to add basic support for LS1021AQDS board. One DDR controller DUART1 is used as the console For the detail board information, please refer to README. Signed-off-by: NAlison Wang <alison.wang@freescale.com> Signed-off-by: NJason Jin <jason.jin@freescale.com> Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NYuan Yao <yao.yuan@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
-