- 30 12月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
Generated by "tools/moveconfig -s". This will make config moves easier. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 26 11月, 2016 3 次提交
-
-
由 Simon Glass 提交于
This adds support for the Asus Chromebit, and RK3288-based device designed to plug directly into an HDMI monitor. The device tree file comes from Linux v4.8. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present we have a single rk3288-based Chromebook: chromebook_jerry. But all such Chromebooks can use the same binary with only device-tree differences. The family name is 'veyron', so rename the files accordingly. Also update the device-tree filename since this currently differs from Linux. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Adjust jerry to use of-platdata like other rk3288 boards. This reduces the SPL size enough that it boots again. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 24 10月, 2016 3 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CONSOLE_SCROLL_LINES Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV CONFIG_CONSOLE_MUX Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Re-order, re-migrate] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Move these option to Kconfig and tidy up existing uses. The Power PC boards don't have a suitable common element: the common header files don't appear to line up with the Kconfig files as far as I can tell. This results in a lot of defconfig changes. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagan Teki <jteki@openedev.com> [trini: Re-migrate, update common/console.c logic] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 10月, 2016 1 次提交
-
-
由 Lokesh Vutla 提交于
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 17 9月, 2016 5 次提交
-
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 09 9月, 2016 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 7月, 2016 1 次提交
-
-
由 Heiko Stübner 提交于
The rk3288 pinctrl is very specific to this soc, so should not hog the generic rockchip naming. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 17 6月, 2016 1 次提交
-
-
由 Tom Rini 提交于
With updated moveconfig.py and an better default, re-generate the migration of BOOTDELAY to the defconfig. Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 10 6月, 2016 1 次提交
-
-
由 Heiko Schocher 提交于
move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 27 5月, 2016 1 次提交
-
-
由 Stephen Warren 提交于
The current reset API implements a method to reset the entire system. In the near future, I'd like to introduce code that implements the device tree reset bindings; i.e. the equivalent of the Linux kernel's reset API. This controls resets to individual HW blocks or external chips with reset signals. It doesn't make sense to merge the two APIs into one since they have different semantic purposes. Resolve the naming conflict by renaming the existing reset API to sysreset instead, so the new reset API can be called just reset. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 26 4月, 2016 3 次提交
-
-
由 Tom Rini 提交于
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 3月, 2016 1 次提交
-
-
由 Bin Meng 提交于
Some boards' defconfig files are out of order. Clean this up. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 15 3月, 2016 1 次提交
-
-
由 Simon Glass 提交于
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 06 2月, 2016 1 次提交
-
-
由 Simon Glass 提交于
The option was renamed to CONFIG_CONSOLE_ROTATION and Rockchip boards were not updated. However this option is is not needed by default for Rockchip since we don't need a rotated console for current boards. So just remove the old option. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 26 1月, 2016 1 次提交
-
-
由 Anatolij Gustschin 提交于
Enabling CONFIG_DISPLAY breaks building for some architectures (microblaze-generic), so we disable CONFIG_DISPLAY in Kconfig by default and enable this option in defconfigs. CONFIG_DISPLAY depends on CONFIG_I2C_EDID, so add and enable it in defconfigs, too. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reported-by: NBin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NBin Meng <bmeng.cn@gmail.com> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 22 1月, 2016 10 次提交
-
-
由 Simon Glass 提交于
Enable these devices using the VOPL video output device. We explicitly disable VOPB in the device tree to avoid it taking over. Since this device has an LCD display this comes up by default. If the display fails for some reason then it will attempt to use HDMI. It is possible to force it to fail (and thus fall back to HDMI) by puting 'return -EPERM' at the top of rk_edp_probe(). For now there is no easy way to select between the two. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a feature which speeds up the CPU to full speed in SPL to minimise boot time. This is only supported for certain boards (at present only jerry). Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Turn on the EC and enable the keyboard. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
To reduce the SPL image size, drop the LED features. Jerry does not have an LED and we can leave out GPIO support also. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is not needed for booting, so drop it from SPL to save about 300 bytes. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Enable this PMIC and regulator, which is used on jerry. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Use the full pinctrl driver in U-Boot proper. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present we use the same peripheral ID for clocks and pinctrl. While this works it is probably better to use the device tree clock binding ID for clocks. We can use the clk_get_by_index() function to find this. Update the clock drivers and the code that uses them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is defined in the device tree in Linux. Copy over the settings so that this can be used instead of hard-coding the reset line. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This has got out of sequence somehow. Fix it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 08 1月, 2016 1 次提交
-
-
由 Simon Glass 提交于
Various updates did not make it through to this board. Also the instructions for building a SPI image are no-longer correct. Fix these so that Jerry can boot to a prompt again. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 01 12月, 2015 2 次提交
-
-
由 Sjoerd Simons 提交于
Now that u-boot relocates the malloc area in SPL to SDRAM, with the malloc area sitting below the SPL_STACK_R_ADDR the SPL_STACK_R_MALLOC_SIMPLE_LEN needs to be set explicitly for rockchip as its SPL_STACK_R_ADDR (512kb) is smaller then STACK_R_MALLOC_SIMPLE_LEN (1Mb). Using the same value as SYS_MALLOC_F_LEN (8kb) is enough to load u-boot from SD card. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 huang lin 提交于
Add SPL Kconfig for REGMAP and SYSCON, so REGMAP and SYSCON can remove from SPL stage. Signed-off-by: NLin Huang <hl@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 25 11月, 2015 1 次提交
-
-
由 Bin Meng 提交于
There are already Kconfig options for SPI drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 22 11月, 2015 1 次提交
-
-
由 Thomas Chou 提交于
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-