Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 30 12月, 2016 1 次提交
  3. 29 11月, 2016 1 次提交
  5. 27 9月, 2016 1 次提交
    • T
      dfu: Migrate to Kconfig · 6828e602
      由 Tom Rini 提交于 
      Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
CMD_DFU (as we must have the DFU command enabled to do anything DFU).
Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
options for all of the back end choices that DFU can make use of.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NLukasz Majewski <l.majewski@samsung.com>
      6828e602
  7. 17 9月, 2016 2 次提交
  9. 25 5月, 2016 1 次提交
    • H
      sunxi: Enable a bunch of commands by default on sunxi · 0878a8a7
      由 Hans de Goede 提交于 
      Recently a set of CONFIG_CMD_FOO defines was moved from being defined
in config_distro_defaults to Kconfig, and added to all sunxi defconfigs
to compensate.

Instead of explictly selecting these in all sunxi defconfigs,
simply always select these for sunxi boards. This makes the defconfigs
simpler and ensures a consistent set of available commands across all
sunxi boards.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
      0878a8a7
  11. 26 4月, 2016 3 次提交
  13. 20 4月, 2016 2 次提交
  15. 12 4月, 2016 1 次提交
  17. 26 3月, 2016 1 次提交
  19. 24 3月, 2016 1 次提交
  21. 15 3月, 2016 1 次提交
    • S
      Kconfig: Move CONFIG_FIT and related options to Kconfig · 73223f0e
      由 Simon Glass 提交于 
      There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.
Signed-off-by: NSimon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: NTom Rini <trini@konsulko.com>
      73223f0e
  23. 10 12月, 2015 1 次提交
  25. 22 11月, 2015 1 次提交
  27. 19 11月, 2015 1 次提交
  29. 13 11月, 2015 1 次提交
  31. 21 10月, 2015 1 次提交
  33. 31 8月, 2015 1 次提交
  35. 25 7月, 2015 1 次提交
  37. 26 6月, 2015 2 次提交
  39. 06 6月, 2015 1 次提交
  41. 01 6月, 2015 2 次提交
  43. 13 5月, 2015 1 次提交
  45. 04 5月, 2015 2 次提交
  47. 19 4月, 2015 1 次提交
  49. 26 3月, 2015 1 次提交
    • I
      sunxi: set GMAC TX delay = 0x1 on Cubietruck. · a923abc2
      由 Ian Campbell 提交于 
      Of 4 boards in our automated test system 2 do not have reliable
networking with the default TX delay of 0x0. Increasing to 0x1 seems
to make things reliable on all 4 boards.

Some previous ad-hpoc tests with tx delay set to 0, 1, 2 and 3 on one
of the problematic boards showed:

0: mw.l 0x1c20164 0x006 1     -- t/o in 4/5 tftp runs
1: mw.l 0x1c20164 0x406 1     -- t/o in 1/5 tftp runs
2: mw.l 0x1c20164 0x806 1     -- t/o in 1/5 tftp runs
3: mw.l 0x1c20164 0xc06 1     -- t/o many times in first tftp run

For 0, 1 and 2 "t/o" means one or two "T" glitches in the download,
but it did complete. For 3 those were basically continuous and it
couldn't complete.

tftp was of a 16M initrd.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
      a923abc2
  51. 16 3月, 2015 1 次提交
  53. 02 2月, 2015 1 次提交
  55. 23 1月, 2015 1 次提交
  57. 14 1月, 2015 1 次提交
  59. 05 11月, 2014 3 次提交
    • I
      sunxi: kconfig: Introduce CONFIG_TARGET_<BOARD> · d9a20476
      由 Ian Campbell 提交于 
      This was done automatically with the following bits of scripting.

The Kconfig choice content was generated with this script snippet:
    for i in $(git grep -l CONFIG_ARCH_SUNXI configs/*) ; do
        TARGET=$(sed -n -e 's/CONFIG_SYS_EXTRA_OPTIONS="\([^,"]\+\).*/\1/p' $i);
        MACH=$(sed -n -e 's/.*CONFIG_\(MACH_SUN.I\)=./\1/p' $i)
        echo "config TARGET_$TARGET"
        echo "	bool \"$TARGET\""
        echo "	depends on $MACH"
        echo
    done

defconfigs were updated with a sed script (t):
    # Extract board from first entry of CONFIG_SYS_EXTRA_OPTIONS,
    /^CONFIG_SYS_EXTRA_OPTIONS/ {
        s/^\(CONFIG_SYS_EXTRA_OPTIONS="\)\([^,"]\+\),\?\(.*\)/\1\3\nCONFIG_TARGET_\2=y/;

        # Print and delete first line (CONFIG_SYS_EXTRA_OPTIONS), leaving
        # CONFIG_TARGET_<BOARD> in pattern space
        P;D;
    };

    # Move CONFIG_TARGET_<BOARD> to hold space
    /^CONFIG_TARGET/{h;n}

    # Print CONFIG_TARGET_<BOARD> after CONFIG_MACH_<SOC> in either SPL or
    # normal mode.
    /^CONFIG_MACH/{p;g;p;n};
    /^\+S:CONFIG_MACH/{p;g;s/^CONFIG_TARGET/+S:&/;p;n};

    # Print any remaining lines normally
    p;
Run as:
    sed -i -n -f t $(git grep -l CONFIG_ARCH_SUNXI configs/*)
and then manually removing the one instance of CONFIG_SYS_EXTRA_OPTIONS="" from
Colombus_defconfig

board/sunxi/Makefile was updated with:
    sed -e 's/^\(obj-\$(CONFIG_\)\(.*\)\().*+= dram_.*\)/\1TARGET_\2\3/g' board/sunxi/Makefile
and manually retabbing a few lines to line up again.

The board descriptions could certainly be improved.
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
      d9a20476
    • I
      sunxi: kconfig: Rename TARGET_SUN[45678]I to MACH_SUN[45678]I. · c3be2793
      由 Ian Campbell 提交于 
      Now we have CONFIG_ARCH_SUNXI as the toplevel, CONFIG_MACH_SUN[45678]I as the
per-SoC option and leave CONFIG_TARGET_BLAH free for individual boards in the
future.

Done automatically with:
    sed -i -e 's/TARGET_\(SUN[45678]I\)/MACH_\1/g' $(git grep -l TARGET_SUN[45678]I)
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
      c3be2793
    • I
      sunxi: kconfig: Add top-level ARCH_SUNXI · 2c7e3b90
      由 Ian Campbell 提交于 
      And make TARGET_SUN[45678]I a choice variable under this.

configs updated with:
    sed -i -e 's/^\(\+S:\)\?CONFIG_TARGET_SUN.I=y/\1CONFIG_ARCH_SUNXI=y\n&/g' configs/*
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
      2c7e3b90
  61. 05 9月, 2014 1 次提交